Honeywell Hrdp H264 Manual

HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  41 
02/11    
Monitor 
Configuration  
 
 
TRANSPARENCY  SETUP  –  0 ~  20 [Set the transparency of the setup 
windows].  
VGA  RESOLUTION  –  Set  monitor resolution. 
FIT -IN  VGA  –  Adjusts the display to display properly on a VGA monitor. When 
the FIT -IN VGA check box is cleared, the display is adjusted to display on a 
monitor connected to the MAIN...

Setup 
 
________________________________________________________________________\
______________________ 
42  
   
Record
 
 
Recording Configuration  
Frame 
 
 
ON/OFF  – Enable or disable recording on  individual camera channels. 
SIZE  – 352  × 240 / 704 ×  240 / 704 ×  480. [Resolution]  
IPS  – 1~30 [Recording Images Per Second]   
QUALITY  – Low  / Normal  / High  
INTENSIVE  – ON/OFF [Intensive Recording on sensor or motion  event] 
Note  When  a motion or sensor event occurs, INTENSIVE...

HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  43 
02/11    
Schedule
 
Set the recording schedule for each camera : 
1.   Press ME NU on the front panel or remote control. 
or  
Click  MENU  on the Mouse -over  menu and select SETUP . 
2.   Select RECORD > SCHEDULE.  
3.   Select a camera to create a recording schedule, or select ALL.  
4.   Select the check box of the desired RECORD MODE.  
5.   Click...

Setup 
 
________________________________________________________________________\
______________________ 
44  
  SENSOR
 
Orange   SENSOR
-activated recording  
In sensor mode, the DVR  will record when a sensor is 
triggered   -   during  DURATION  time as set in RECORD > 
MOTION /EVENT C ONFGURATION > ACTION.   
CONT+MOT  
Sky Blue   CONTINUOUS
 +  MOTION detection recording  
The  DVR  records  in CONTINUOUS mode but switches 
toMOTION when  motion is det ected in the motion area. 
The  DVR  also...

HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  45 
02/11  
 
Holiday Setup
 
Add a recording schedule for a specific date  in HOLIDAY SETUP.  You can 
add up to 32  individual HOLIDAY recording schedules. To add a new 
HOLIDAY schdule:  
1.   Press MENU on the front panel or remote control. 
or 
Click  MENU  on the Mouse -over  menu and select SETUP . 
2.   Select RECORD > RECORD CONFIGURATION >...

Setup 
 
________________________________________________________________________\
______________________ 
46  
   
Instant Recording
 
Configure the recording settings for Instant Recording to use when it is 
activated. 
 
 
IPS  – Set the IPS (recording rate per camera).  
QUALITY  –  Set the picture quality (affects file size).  
SIZE  – Set the resolution of the video image.  
 
Using  Instant Recording  
To activate Instant Recording on the DVR:  
•  Press  the REC key on the front panel of the DVR...

HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  47 
02/11    
Motion/Event Configuration
 
Motion / Event Configuration has four sections ; Input, Sensor,  Action, and 
Alarm Monitor. When a n event comes in (Input) the DVR records the image 
according to its setting s ( Camera Configuration ) and triggers an alarm 
(Action).  
 
Input  
 
 
CH  –    Channels 1 -8 /   Channels 9- 16 
MOTION  –  ON /...

Setup 
 
________________________________________________________________________\
______________________ 
48  
   
Setting Up Motion Detection Recording
 
To record data only when motion is detected:  
 
 
1.   Press SETUP on the front of the DVR or remote control.  
2.   Select Record > Motion/Event Configuration and set MOTION to ON.   
3.   Set  the motion  SENSITIVITY  level. [1~10].  
4.   Select AREA and press ENTER to set a motion area (global setting; each 
channel can be configured...

HRDP DVR User Guide 
 
________________________________________________________________________\
______________________ 
Document 800 -06801   Rev D  49 
02/11    
Sensor
 
 
 
Sensor  Setup 
1.   Use the arrow buttons to select Sensor 1 and press ENTER to change to 
N/O (Normally Open) or N/ C (Normally Closed). 
2.   Repeat for all sensors.  
3.   Select SAVE and press ENTER to save settings . 
 
Alarm  Setup  
1.   Use the arrow buttons to select Alarm 1 and press ENTER to turn the 
SIGNAL to OFF or...

Setup 
 
________________________________________________________________________\
______________________ 
50  
   
S.M.A.R.T. Alarm
 
The S.M.A.R.T. ALARM option is a preset function that triggers an alarm relay 
when the DVR HDD exceeds the temperature threshold configured on the 
SYSTEM > DISK SETUP > S.M.A.R.T. page. This function is preconfigured to 
set an alarm relay to ON and N/C. When the HDD exceeds the temperature 
threshold, the alarm relay will open. When the temperature is at a safe level...