Honeywell Hrdp H264 Manual
Here you can view all the pages of manual Honeywell Hrdp H264 Manual. The Honeywell manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
HRDP DVR User Guide
________________________________________________________________________\
______________________
Document 800 -06801 Rev D 31
02/11
System
System Configuration
To enter System Configuration, press the Setup key on the front of the DVR
and press ENTER to select System Configuration. Use the arrow buttons on
the front panel of the DVR or the remote control to navigate the display. Select
Save and press ENTER to update settings.
Video Format – NTSC / PAL....](http://img.usermanuals.tech/thumb/35/104331/w300_hrdp-h264-manual-1523448421_d-30.png "Page 31
HRDP DVR User Guide
________________________________________________________________________\
______________________
Document 800 -06801 Rev D 31
02/11
System
System Configuration
To enter System Configuration, press the Setup key on the front of the DVR
and press ENTER to select System Configuration. Use the arrow buttons on
the front panel of the DVR or the remote control to navigate the display. Select
Save and press ENTER to update settings.
Video Format – NTSC / PAL....")
HRDP DVR User Guide ________________________________________________________________________\ ______________________ Document 800 -06801 Rev D 31 02/11 System System Configuration To enter System Configuration, press the Setup key on the front of the DVR and press ENTER to select System Configuration. Use the arrow buttons on the front panel of the DVR or the remote control to navigate the display. Select Save and press ENTER to update settings. Video Format – NTSC / PAL....
Page 32
![Page 32
Setup
________________________________________________________________________\
______________________
32
System Configuration Continued
Use DST – After completing the Time Zo ne setup, highlight USE DST and
press ENTER to turn Daylight Saving Time ON / OFF.
NTP Type – Highlight NTP (Network Time Protocol) and press ENTER to
SYNC the DVR with the Network Time.
Keypad Beep – ON / OFF [Enables / Disables Audible keypad touch
confirmation].
Auto Log Off – OFF or 1 -10 Minutes...](http://img.usermanuals.tech/thumb/35/104331/w300_hrdp-h264-manual-1523448421_d-31.png "Page 32
Setup
________________________________________________________________________\
______________________
32
System Configuration Continued
Use DST – After completing the Time Zo ne setup, highlight USE DST and
press ENTER to turn Daylight Saving Time ON / OFF.
NTP Type – Highlight NTP (Network Time Protocol) and press ENTER to
SYNC the DVR with the Network Time.
Keypad Beep – ON / OFF [Enables / Disables Audible keypad touch
confirmation].
Auto Log Off – OFF or 1 -10 Minutes...")
Setup ________________________________________________________________________\ ______________________ 32 System Configuration Continued Use DST – After completing the Time Zo ne setup, highlight USE DST and press ENTER to turn Daylight Saving Time ON / OFF. NTP Type – Highlight NTP (Network Time Protocol) and press ENTER to SYNC the DVR with the Network Time. Keypad Beep – ON / OFF [Enables / Disables Audible keypad touch confirmation]. Auto Log Off – OFF or 1 -10 Minutes...
Page 33
![Page 33
HRDP DVR User Guide
________________________________________________________________________\
______________________
Document 800 -06801 Rev D 33
02/11
Disk Configuration
Format
Shows installed Hard Disk Drives and the status of other attached storage
devices.
To format a Hard Drive use the arrow keys to select the appropriate device
and press ENTER. Select FORMAT and press ENTER, select YES to confirm
formatting and press ENTER.
To format a USB device use the arrow keys to...](http://img.usermanuals.tech/thumb/35/104331/w300_hrdp-h264-manual-1523448421_d-32.png "Page 33
HRDP DVR User Guide
________________________________________________________________________\
______________________
Document 800 -06801 Rev D 33
02/11
Disk Configuration
Format
Shows installed Hard Disk Drives and the status of other attached storage
devices.
To format a Hard Drive use the arrow keys to select the appropriate device
and press ENTER. Select FORMAT and press ENTER, select YES to confirm
formatting and press ENTER.
To format a USB device use the arrow keys to...")
HRDP DVR User Guide ________________________________________________________________________\ ______________________ Document 800 -06801 Rev D 33 02/11 Disk Configuration Format Shows installed Hard Disk Drives and the status of other attached storage devices. To format a Hard Drive use the arrow keys to select the appropriate device and press ENTER. Select FORMAT and press ENTER, select YES to confirm formatting and press ENTER. To format a USB device use the arrow keys to...
Page 34
![Page 34
Setup
________________________________________________________________________\
______________________
34
Overwrite
Sets options for overwriting data when the Hard Disk Drive is full.
Enable HDD OVERWRITE to allow the DVR to write over previously recorded
data, starting with the oldest date, when the HDD is full. If set to DISABLE the
DVR will not record any new data once the HDD becomes full.
Enable a DISK FULL WARNING for notification when the HDD becom es full
and HDD...](http://img.usermanuals.tech/thumb/35/104331/w300_hrdp-h264-manual-1523448421_d-33.png "Page 34
Setup
________________________________________________________________________\
______________________
34
Overwrite
Sets options for overwriting data when the Hard Disk Drive is full.
Enable HDD OVERWRITE to allow the DVR to write over previously recorded
data, starting with the oldest date, when the HDD is full. If set to DISABLE the
DVR will not record any new data once the HDD becomes full.
Enable a DISK FULL WARNING for notification when the HDD becom es full
and HDD...")
Setup ________________________________________________________________________\ ______________________ 34 Overwrite Sets options for overwriting data when the Hard Disk Drive is full. Enable HDD OVERWRITE to allow the DVR to write over previously recorded data, starting with the oldest date, when the HDD is full. If set to DISABLE the DVR will not record any new data once the HDD becomes full. Enable a DISK FULL WARNING for notification when the HDD becom es full and HDD...
Page 35
![Page 35
HRDP DVR User Guide
________________________________________________________________________\
______________________
Document 800 -06801 Rev D 35
02/11
SMART Check
S.M.A.R.T. = Self Monitoring Analysis & Reporting Technology.
Enable SMART Check to detect signs of HDD failure.
1. Set ENABLE S.M.A.R.T. to ENABLE or DISABLE .
2. Set a CHECK INTERVAL between 1 and 24 hours.
3. Define a TEMP THRESHOLD and select Celsius or Fahrenheit.
Note The recommended upper optimum...](http://img.usermanuals.tech/thumb/35/104331/w300_hrdp-h264-manual-1523448421_d-34.png "Page 35
HRDP DVR User Guide
________________________________________________________________________\
______________________
Document 800 -06801 Rev D 35
02/11
SMART Check
S.M.A.R.T. = Self Monitoring Analysis & Reporting Technology.
Enable SMART Check to detect signs of HDD failure.
1. Set ENABLE S.M.A.R.T. to ENABLE or DISABLE .
2. Set a CHECK INTERVAL between 1 and 24 hours.
3. Define a TEMP THRESHOLD and select Celsius or Fahrenheit.
Note The recommended upper optimum...")
HRDP DVR User Guide ________________________________________________________________________\ ______________________ Document 800 -06801 Rev D 35 02/11 SMART Check S.M.A.R.T. = Self Monitoring Analysis & Reporting Technology. Enable SMART Check to detect signs of HDD failure. 1. Set ENABLE S.M.A.R.T. to ENABLE or DISABLE . 2. Set a CHECK INTERVAL between 1 and 24 hours. 3. Define a TEMP THRESHOLD and select Celsius or Fahrenheit. Note The recommended upper optimum...
Page 36
![Page 36
Setup
________________________________________________________________________\
______________________
36
User Configuration
Use the User Configuration to Add or Delete users.](http://img.usermanuals.tech/thumb/35/104331/w300_hrdp-h264-manual-1523448421_d-35.png "Page 36
Setup
________________________________________________________________________\
______________________
36
User Configuration
Use the User Configuration to Add or Delete users.")
Setup
________________________________________________________________________\
______________________
36
User Configuration
Use the User Configuration to Add or Delete users.
Page 37
![Page 37
HRDP DVR User Guide
________________________________________________________________________\
______________________
Document 800 -06801 Rev D 37
02/11
Adding / Changing a User
SHUT DOWN – Allow the user to shut down or restart the DVR.
EXPORT – Allow the user to perform an export or backup saved data.
USE CD/DVD /USB - A llow the user to use the DVD Drive. This is a Server side
feature only.
SEARCH – Allow the user to perform a calendar, or event search and access...](http://img.usermanuals.tech/thumb/35/104331/w300_hrdp-h264-manual-1523448421_d-36.png "Page 37
HRDP DVR User Guide
________________________________________________________________________\
______________________
Document 800 -06801 Rev D 37
02/11
Adding / Changing a User
SHUT DOWN – Allow the user to shut down or restart the DVR.
EXPORT – Allow the user to perform an export or backup saved data.
USE CD/DVD /USB - A llow the user to use the DVD Drive. This is a Server side
feature only.
SEARCH – Allow the user to perform a calendar, or event search and access...")
HRDP DVR User Guide ________________________________________________________________________\ ______________________ Document 800 -06801 Rev D 37 02/11 Adding / Changing a User SHUT DOWN – Allow the user to shut down or restart the DVR. EXPORT – Allow the user to perform an export or backup saved data. USE CD/DVD /USB - A llow the user to use the DVD Drive. This is a Server side feature only. SEARCH – Allow the user to perform a calendar, or event search and access...
Page 38
![Page 38
Setup
________________________________________________________________________\
______________________
38
Configuration
Import and Export current settings. See details in the Save Settings section .
Shutdown
Use Shutdown to safely shutdown the system.
1. Select System > Shutdown.
2. Select OK to confirm and press ENTER to safely shutdown the system.
3. Turn the power off when shutdown is complete by unplugging the power
adapter cord on the back of the DVR.
N ote Improper...](http://img.usermanuals.tech/thumb/35/104331/w300_hrdp-h264-manual-1523448421_d-37.png "Page 38
Setup
________________________________________________________________________\
______________________
38
Configuration
Import and Export current settings. See details in the Save Settings section .
Shutdown
Use Shutdown to safely shutdown the system.
1. Select System > Shutdown.
2. Select OK to confirm and press ENTER to safely shutdown the system.
3. Turn the power off when shutdown is complete by unplugging the power
adapter cord on the back of the DVR.
N ote Improper...")
Setup ________________________________________________________________________\ ______________________ 38 Configuration Import and Export current settings. See details in the Save Settings section . Shutdown Use Shutdown to safely shutdown the system. 1. Select System > Shutdown. 2. Select OK to confirm and press ENTER to safely shutdown the system. 3. Turn the power off when shutdown is complete by unplugging the power adapter cord on the back of the DVR. N ote Improper...
Page 39
![Page 39
HRDP DVR User Guide
________________________________________________________________________\
______________________
Document 800 -06801 Rev D 39
02/11
Color Setup (Adjust)
CAMERA
– 1 ~ 16 [camera to apply color
settings to]
BRIGHT NESS – 0 ~ 20
CONTRAST – 0 ~ 20
COLOR – 0 ~ 20
DEFAULT – Apply default system color
settings.
APPLY ALL – Apply current color settings
to all cameras
PTZ Configuration
CH – Camera Channels
BAUD RATE – Sets the port...](http://img.usermanuals.tech/thumb/35/104331/w300_hrdp-h264-manual-1523448421_d-38.png "Page 39
HRDP DVR User Guide
________________________________________________________________________\
______________________
Document 800 -06801 Rev D 39
02/11
Color Setup (Adjust)
CAMERA
– 1 ~ 16 [camera to apply color
settings to]
BRIGHT NESS – 0 ~ 20
CONTRAST – 0 ~ 20
COLOR – 0 ~ 20
DEFAULT – Apply default system color
settings.
APPLY ALL – Apply current color settings
to all cameras
PTZ Configuration
CH – Camera Channels
BAUD RATE – Sets the port...")
HRDP DVR User Guide ________________________________________________________________________\ ______________________ Document 800 -06801 Rev D 39 02/11 Color Setup (Adjust) CAMERA – 1 ~ 16 [camera to apply color settings to] BRIGHT NESS – 0 ~ 20 CONTRAST – 0 ~ 20 COLOR – 0 ~ 20 DEFAULT – Apply default system color settings. APPLY ALL – Apply current color settings to all cameras PTZ Configuration CH – Camera Channels BAUD RATE – Sets the port...
Page 40
![Page 40
Setup
________________________________________________________________________\
______________________
40
Spot / Sequenc
e Configuration
Spot/Sequence Configuration allows you to set the parameters for the SPOT
OUT on the DVR and the local live view sequencing.
SPOT –Configure the SPOT OUT connection.
INTERVAL – 1 ~ 100 seconds [Set the sequence interval time].
POPUP – ON / OFF [ When set to ON, this function interrupts the sequencing
when an event occurs, and switches to the...](http://img.usermanuals.tech/thumb/35/104331/w300_hrdp-h264-manual-1523448421_d-39.png "Page 40
Setup
________________________________________________________________________\
______________________
40
Spot / Sequenc
e Configuration
Spot/Sequence Configuration allows you to set the parameters for the SPOT
OUT on the DVR and the local live view sequencing.
SPOT –Configure the SPOT OUT connection.
INTERVAL – 1 ~ 100 seconds [Set the sequence interval time].
POPUP – ON / OFF [ When set to ON, this function interrupts the sequencing
when an event occurs, and switches to the...")
Setup ________________________________________________________________________\ ______________________ 40 Spot / Sequenc e Configuration Spot/Sequence Configuration allows you to set the parameters for the SPOT OUT on the DVR and the local live view sequencing. SPOT –Configure the SPOT OUT connection. INTERVAL – 1 ~ 100 seconds [Set the sequence interval time]. POPUP – ON / OFF [ When set to ON, this function interrupts the sequencing when an event occurs, and switches to the...
All Honeywell manuals