Honeywell 8 Channel Dvr Manual

HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B91
08/10
Figure 4-13 Motion Setting Configuration Window
2. Select a channel and a sensitivity level. 
3. Drag your mouse on the image to select a detection area. 
4. Click OK. 
See Configuring PTZ Camera Parameters on page 31 for more information. 
Configuring the On-Screen Display
You can choose which text items display over the image. 
Click OSD under Display in the field on the left. The OSD Setting window opens. 
Figure 4-14 OSD...

92 Using the Web Remote Viewer
See Configuring the Display on page 39 for more information about configuring the display. 
Configuring the Monitor
Click Monitor under Display in the field on the left. The Monitor Setting window opens.
Figure 4-15 Monitor Setting
You can set the dwell time for a sequence or spot, and for the pop-up functions. 
See Configuring the Monitor Display on page 40 for more information. 
Configuring the Sound Settings
Click Audio/Buzzer under Sound in the field on the left. The...

HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B93
08/10
Audio Setting
Enable/disable Audio and select a default audio channel.
Buzzer Setting
Enable/disable the buzzer for event notification. 
See Configuring Sound Settings on page 45 for more information. 
Configuring the System Setup
Click System in the field on the left. The Date/Time Setting window opens.
Figure 4-17 Date/Time Setting Window
You can configure the date and time for the system, check system information, and...

94 Using the Web Remote Viewer
Figure 4-18 Continuous/Motion Recording Setting Window
You can configure the recording settings. Configuring recording settings is similar to 
configuring system settings. See Configuring the Users on page 49 for more information. 
Configuring Users
Click User in the field on the left. The User Authority Setting window opens.
Figure 4-19 User Authority Setting Window
You can add a user, select a user’s authority level, and configure the user’s log-out time. 
See Configuring...

HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B95
08/10
Configuring the Network
Click Network under Network in the field on the left. The IP Setup Setting window opens.
Figure 4-20 IP Setup Setting Window
You can check the system’s network information and selectable speed level. You cannot 
change IP settings. The network IP can be set only on the DVR. See Configuring the 
Network Settings on page 52 for more information. 
Configuring E-mail Notification
Click E-mail under Network...

96 Using the Web Remote Viewer
Configuring Sensors
Click Sensor under Sensor in the field on the left. The Alarm Output Setting window 
appears. 
Figure 4-22 Alarm Output Setting Window
Users with ADMIN privileges can set all device options for Alarm in/out and buzzer out for 
event notification (HDD event, alarm input, alarm output, buzzer out, and e-mail 
notification). See Configuring Alarm Setup on page 67 for more information. 
Getting Information
Click on Information, and view the information about...

HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B97
08/10
Figure 4-23 Information About Your DVR 

98 Using the Web Remote Viewer 

Document 800-06847 Rev B99
08/10
5
Watermark Process
This process applies to video clips that were burned to CD/DVD or to USB media using 
the Backup/Archive/Burn process from the front panel of the DVR. 
1. Open the backup data from the device and then run the [bplayer] which is included 
in the backup folder. 
Figure 5-1 bplayer
2. Click the [Open file] button and open the backup file.  

100 Watermark Process
Figure 5-2 Opening the Backup File
3. Click Yes when the Checking the watermark? message appears after opening 
the backup file. 
Figure 5-3 Checking the Watermark Message