Honeywell 8 Channel Dvr Manual

Document 800-06847 Rev B81
08/10
4
Using the Web Remote Viewer
Preparing for an Internet Connection
Port Forwarding
For an internet connection, you should set ports 554 and 8080 in your Router for port 
forwarding. 
Refer to your Router manual for port forwarding settings. 
Minimum Internet Requirements
Table 4-1 Internet RA Minimum PC Requirements
CPU P4 3.0 or higher
RAM 512MB or higher
VGA • Geforce MS 400, Radeon 7500 or higher
• Geforce 8 series or higher
VGA Memory 64MB
Monitor 1280x1024
OS...

82 Using the Web Remote Viewer
Connecting to the Internet
1. Open IE.
2. Enter the IP Address or the URL of your DVR into the IE Explorer Address bar. 
When using the DDNS services, enter the URL as shown below: 
• http://1234.dvrlink.net:8080 (webport:8080), or
• http://1234.dvrlink.net (webport:80)
The Windows Security window opens. 
Figure 4-1 Entering the User Name and Password for Internet Connection
3. Enter the Default ID (ADMIN) and password (1234), then click OK.
The ATM-Windows Internet...

HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B83
08/10
Figure 4-2 ATM-Windows Internet Explorer Add-on Option Window
4. Select Run Add on to install ActiveX. 
An ActiveX Installation window opens. 
Figure 4-3 ActiveX Installation Window
5. Click Install to install ActiveX.
Enabling the Installation of ActiveX
You might not be able to install ActiveX due to some Internet Explorer security settings. To 
change these security settings, go to Tools > Internet Options > Security >...

84 Using the Web Remote Viewer
Figure 4-4 Internet Options Window in IE 
6. Click Custom level.... The Security Settings - Trusted Sites Zone window appears. 
Figure 4-5 Security Settings - Trusted Sites Zone Window
7. Select Enable for all ActiveX-related options, then click OK to save the changes.  

HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B85
08/10
Live Mode
Figure 4-6 Live Mode in an Internet Connection
Table 4-2 Live Mode Functions
Live Mode Function Description
Select the division of the screen in Live view mode. Select from 
1, 4, 8, 9, and 16 screens. 
• Move to next N cameras, for example from ch1-4 to ch5-8 
in 2x2 view
• Move to the next camera
• Display Full Screen
Manually select the live channel. 
• Activate Mic to send sound to the DVR.
• Turn On/Off sound...

86 Using the Web Remote Viewer
StatusShows the active status of the DVR:
Alarm - Indicates an Alarm input. 
Motion - Indicates detected Motion.
Video Loss - Indicates when a Video Loss alarm is detected.
Recording - Indicates the current recording mode 
(T=Continuous; M=Motion; A=Alarm recording)
Alarm Out - Indicates when an Alarm Output is detected.
Refresh Time - Set the interval of Refresh for the camera status 
and log. 
Reload - Instantly refresh the camera status and log. 
LogDisplays all system...

HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B87
08/10
Searching for Recorded Video
Searching by Timeline
1. Click Search in the Live mode window. 
The Search window appears. 
Figure 4-7 Internet Search Window
In this window, you can do the following functions: 
2. Click Search By Time if it isn’t already selected. 
Function Description
RefreshRefresh the data in the recording table.
PlayPlay the data recorded from the system.
BackupSave to the local computer an AVI video clip file...

88 Using the Web Remote Viewer
Figure 4-8 Searching By Timeline
3. Select a timeline on the timetable, or set an exact time, then click Play.
4. Click Backup, and the Backup configuration window opens.
Figure 4-9 Backup Configuration Window
Searching by Event
1. Click Search By Event. The Search By Event window opens.
Figure 4-10 Search By Event Window
2. Select the type(s) of event(s) you want to search.  

HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B89
08/10
3. Configure a time frame for the search in the From and To fields for the Time Period, 
then click Search. The results of the search display. 
Figure 4-11 Event Search Query Results
Setup Mode 
In the Setup window, in the field on the left, you can access configuration menus for 
configuring: 
•Cameras
•The display
• Sound parameters
• System setup
• Recording parameters
•Users
• The network connection
•Sensors
Click Setup in...

90 Using the Web Remote Viewer
Figure 4-12 Internet Connection Camera Setup Window
Using an Internet Connection to Configure a Camera
You can configure a camera’s title, live color display, PTZ setup, and motion detection 
settings.
1. Click Camera again under Camera in the field on the left. Figure 4-12 appears. 
2. Make your configuration selections, and then click Ok to save. 
Configuring Motion Detection
1. Click Motion under Camera. The Motion Setting window opens.