Honeywell 4 Channel Manual

Configuration
Rev 3.03 53 Document 900.0315
02/07
Motion Detector Event Action (Notify) Setup Screen
Use this screen to set the DVR to notify the remote site when certain motion events are 
activated. 
Figure 3-39 Motion Detector Event Action (Notify) Screen
1. Highlight the Sched box and then press  . A schedule screen displays. Set the 
schedule as described earlier.
2. Highlight the Notify box and then press  . This toggles between On and Off. 
When it is On, the DVR notifies the remote site when...

Configuration
Rev 3.03 54 Document 900.0315
02/07
Figure 3-40 Text-In Event Action (Record) Screen
1. Highlight the Sched box and then press  . A schedule screen displays. Set the 
schedule as described earlier.
2. Highlight the Camera box and then press  . A camera selection screen displays. 
Select the camera number you would like to associate with the text-in device.
NoteYou cannot associate multiple cameras with a text-in device.
3. Highlight the Speed box and select the number of images per second...

Configuration
Rev 3.03 55 Document 900.0315
02/07
Figure 3-41 Text-In Event Action (Alarm Out) Screen
1. Highlight the Sched box and then press  . A schedule screen displays. Set the 
schedule as described earlier.
2. Highlight the Alarm Out box and select either Beep or the alarm output terminal 
that you want to associate with the motion event.
3. Highlight the Dwell Time box and set the length of time you want the output 
activated.
Text-In Event Action (Notify) Setup Screen
Use this screen to set...

Configuration
Rev 3.03 56 Document 900.0315
02/07
NoteFor the Notify action to work, the DVR should be registered in the 
RAS (Remote Administration System).
Video Loss Event Action (Record) Setup Screen
Use this screen to set the DVR to react to video loss from a camera differently. Each 
camera can be assigned a schedule, associated camera, recording speed, video 
quality and dwell time.
Figure 3-43 Video Loss Event Action (Record) Screen
1. Highlight the Sched box and then press  . A schedule screen...

Configuration
Rev 3.03 57 Document 900.0315
02/07
Video Loss Event Action (Alarm Out) Setup Screen
You can set the DVR to react to video loss differently by activating an internal buzzer or 
external alarms.
Figure 3-44 Video Loss Event Action (Alarm Out) Screen
1. Highlight the Sched box and then press  . A schedule screen displays. Set the 
schedule as described earlier.
2. Highlight the Alarm Out box and select either Beep and/or the alarm output 
terminal that you want to associate with the camera...

Configuration
Rev 3.03 58 Document 900.0315
02/07
When it is On, the DVR notifies the remote site when it loses video input from a 
camera based on a defined schedule.
NoteFor the Notify action to work, the DVR should be registered in the 
RAS (Remote Administration System).
Display Setup
Highlight OSD or Main Monitoring in the Display menu, and then press    to set up the 
on-screen display or camera display on the main monitor.
OSD (On-Screen Display) Setup
Use the OSD Setup screen (MENU ➤ Display ➤...

Configuration
Rev 3.03 59 Document 900.0315
02/07
4. Highlight the box beside Status and then press   to toggle status display On and 
Off.
5. Highlight the box beside Left/Right Margin and then press   to adjust the left and 
right margins. The margins can be set from 1 to 24.
6. Highlight the box beside Top/Bottom Margin and then press   to adjust the top 
and bottom margins. The margins can be set from 1 to 24.
7. Highlight the box beside Text-In and then press   to toggle the text-in data...

Configuration
Rev 3.03 60 Document 900.0315
02/07
Network Setup Screen
Use the Network Setup screen (MENU ➤ Network ➤ Network Setup) to set up the 
DVR for LAN and modem connections.
Figure 3-48 Network Setup Screen
1. Highlight the box beside Connection. Press   to toggle between LAN and 
Modem.
2. Highlight the box beside Admin Password and then press . A virtual keyboard 
displays (see Figure 3-7). You will first be asked to enter the current password. 
Then you can enter a new password; you will be...

Configuration
Rev 3.03 61 Document 900.0315
02/07
4. The Transfer Speed indicates the image rate transferred to each RAS. Highlight 
the box beside Transfer Speed, press  then adjust the number.
NoteThe maximum transfer speed over a LAN is 30 images per 
second (25 ips for PAL) when the resolution is set to Standard. 
However, when set to High the transfer speed will decrease to 15 
images per second (12.5 ips for PAL).
CautionSelecting the maximum transfer speed will STOP video recording. 
Adjust the...

Configuration
Rev 3.03 62 Document 900.0315
02/07
LAN Setup — Manual
NoteObtain the appropriate IP Address, Gateway and Subnet Mask 
from your network administrator.
Change the numbers by highlighting them and using the Up and Down Arrow buttons 
or the Jog Dial to increase or decrease the numbers.
The factory default LAN settings are:
1. Highlight the box beside DNS Server and then press .to enter the IP address of 
the DNS server. If you set the DNS Server, the domain name of the DVRNS server 
instead...