Honeywell 4 Channel Manual

Configuration
Rev 3.03 23 Document 900.0315
02/07
Normal Setup Screen
Figure 3-4 Normal Setup Screen
Press MENU to enter the Normal Setup screen. If the Quick Setup screen displays, turn 
it off as described above. The Normal Setup screen gives you access to all the DVR 
setup screens.
System Information
Use the System Information screen to name the Site Description (name), assign a unit 
ID number, select the language to use, and upgrade the software. 
Highlight System Information (MENU 
➤ System ➤...

Configuration
Rev 3.03 24 Document 900.0315
02/07
Figure 3-6 System Information Change Screen
2. Highlight the box beside Site Description and press  . A virtual keyboard 
displays.
Figure 3-7 Virtual Keyboard
3. Use the Arrow keys to highlight the first character you want in the Site Title field 
and then press  . That character appears in the title bar and the cursor moves to 
the next position. You can use up to 20 characters including spaces in your title.
Press   to toggle between the upper and...

Configuration
Rev 3.03 25 Document 900.0315
02/07
6. The box beside H/W Version and S/W Version displays current hardware and 
software versions of the DVR.
NoteYou can upgrade the software only in the System Information 
Change screen. 
Only the System Administrator can upgrade the software. 
You cannot upgrade the software during clip copy.
To upgrade the software:
a. Connect the USB device containing the upgrade package file to the DVR. 
Highlight Upgrade… and press  . The System Upgrade screen...

Configuration
Rev 3.03 26 Document 900.0315
02/07
NoteOnly the system administrator can upgrade the software.
You cannot upgrade the software during clip copy.
7. You can save your changes by highlighting OK and pressing  . Selecting Cancel 
exits the screen without saving the changes.
Date/Time Setup
Highlight Date/Time in the Main Menu (MENU ➤ System ➤ Date/Time) and then 
press  . The Date/Time setup screen displays.
Figure 3-9 Date/Time Screen
CautionIf you set a date and time that is older than...

Configuration
Rev 3.03 27 Document 900.0315
02/07
NoteThe clock will not start running until you have restarted the unit, 
so you may wish to set the time last.
3. Highlight the box beside Time Zone and press . Select the time zone you are in 
from the list and press .
4. Highlight the box beside Daylight Saving Time and press . Pressing  toggles 
between On and Off. 
5. Highlight the Holiday Setup… box and press . You can set up holidays by 
highlighting Add: and pressing . The current date...

Configuration
Rev 3.03 28 Document 900.0315
02/07
Figure 3-11 Time Sync Screen
Highlight the box beside Automatic Time Sync and then press   to toggle between 
On and Off.
Highlight the box beside SNTP Server and then press  . Change the numbers by 
highlighting them and using the Up and Down arrows to increase or decrease the 
number value.
Highlight the box beside Interval and then press  . Set the time interval for 
synchronization from 30 to 300 minutes.
The box beside System Clock displays the...

Configuration
Rev 3.03 29 Document 900.0315
02/07
NoteWhen the time difference between the DVR and the time server is 
more than one minutes, the DVR might not synchronize the time 
to prevent any unexpected loss of recorded video data. If you 
want to synchronize the time manually, select Now… .
Highlight the Run as Server box and then press   to toggle between On and Off. When 
it is On, the DVR you are setting up runs as a time server.
To save your changes, highlight OK and then press  . Select...

Configuration
Rev 3.03 30 Document 900.0315
02/07
1. Highlight the box under the On/Off heading and then press  . This toggles 
between On and Off. 
When it is On, the DVR reports a fault condition if it does not detect any recording 
or if there is no alarm during the designated time.
2. Highlight the box under the Interval heading and then press  . A slide bar 
displays allowing you to set the check interval from 1 Hour to 30 Days by using 
the Left and Right Arrow buttons.
3. The Status field...

Configuration
Rev 3.03 31 Document 900.0315
02/07
Storage Screen
Highlight Storage in the Main Menu (MENU ➤ System ➤ Storage) and then press 
 . The Storage setup screen displays. 
Figure 3-14 Storage Screen
The Type field displays the type and capacity of storage devices.
The Status field displays the device status or fault conditions. Options are:
Good
Disk Bad
S.M.A.R.T.
Alert
High Temperature
Not installed
NoteIf the DVR senses S.M.A.R.T (Self-Monitoring, Analysis and 
Reporting Technology), Alert,...

Configuration
Rev 3.03 32 Document 900.0315
02/07
2. Highlight S.M.A.R.T. Setup... and then press . The S.M.A.R.T. Setup screen 
displays. 
NoteIf no hard disk drives are installed in the DVR, the S.M.A.R.T. 
Setup… button is disabled.
Figure 3-15 S.M.A.R.T. Setup Screen
Your DVR shows the conditions of hard disk drives when the installed IDE hard 
disk drives support S.M.A.R.T. Monitoring program. 
a. Highlight the box beside Use. Press  to toggle between On and Off.
b. The Last-check field shows the...