Home > Honeywell > Scanner > Honeywell 1900ghd-2 User Manual

Honeywell 1900ghd-2 User Manual

Here you can view all the pages of manual Honeywell 1900ghd-2 User Manual. The Honeywell manuals for Scanner are available online for free. You can easily download all the documents as PDF.

Page 211

12 - 11
Auto Reconnect Mode *Auto Reconnect On BT_ACM13-24
Auto Reconnect Off BT_ACM03-24
Maximum Link Attempts Maximum Link Attempts BT_MLA3-25
Relink Time-Out Relink Time-Out BT_RLT3-25
Host Command Acknowledgment Host ACK On HSTACK13-27
*Host ACK Off HSTACK03-27
Input/Output Selections
Power Up Beeper Power Up Beeper Off - Scanner BEPPWR04-1
*Power Up Beeper On - Scanner BEPPWR14-1
Power Up Beeper Off - Cordless 
BaseBASPWR04-1
Power Up Beeper On - Cordless 
BaseBASPWR14-1
Beep on BEL Character Beep...

Page 212

12 - 12
Good Read Delay *No Delay DLYGRD04-5
Short Delay (500 ms) DLYGRD5004-5
Medium Delay (1000 ms) DLYGRD10004-5
Long Delay (1500 ms) DLYGRD15004-6
User-Specified Good Read Delay Range 0 - 30,000 ms DLYGRD#####4-6
Manual Trigger Modes *Manual Trigger - Normal PAPHHF4-6
Manual Trigger - Enhanced (not 
supported by Granit 1980i and 
1981i)PAPHHS4-6
LED Illumination - Manual Trigger 
(not supported by Granit 1980i and 
1981i)Off PWRNOL04-6
Low PWRNOL1004-6
Medium (Xenon only) PWRNOL1204-6
*High...

Page 213

12 - 13
Streaming Presentation Streaming Presentation Mode - 
NormalPAPSPN4-12
Streaming Presentation Mode - 
Enhanced (not supported by 
Granit 1980i and 1981i)PAPSPE4-12
Mobile Phone Read Mode (not 
supported by Granit 1980i and 
1981i)Hand Held Scanning - Mobile 
PhonePAPHHC4-12
Streaming Presentation - Mobile 
PhonePAPSPC4-12
Hands Free Time-Out Range 0 - 300,000 ms TRGPTO######4-13
Reread Delay Short (500 ms) DLYRRD5004-13
*Medium (750 ms) DLYRRD7504-13
Long (1000 ms) DLYRRD10004-13
Extra Long (2000...

Page 214

12 - 14
Centering Window Centering On DECWIN14-18
*Centering Off DECWIN04-18
Left of Centering Window (*40%) DECLFT###4-18
Right of Centering Window (*60%) DECRGT###4-19
Top of Centering Window (*40%) DECTOP###4-18
Bottom of Centering Window 
(*60%)DECBOT###4-18
Preferred Symbology On PRFENA14-19
*Off PRFENA04-19
High Priority Symbology PRFCOD##4-19
Low Priority Symbology PRFBLK##4-20
Preferred Symbology Timeout
(*500) Range 100-3000PRFPTO####4-20
Preferred Symbology Default PRFDFT4-20
Output Sequence...

Page 215

12 - 15
Healthcare Selections
Quiet Operations - Combination 
CodesSilent Mode with Flashing LED beplfn5;beplfr50;beppar0;baspw
r0;beppwr0;baslvl0;beplvl05-1
Silent Mode with Long LED beplfn0;beplfr10;beppar0;baspw
r0;beppwr0;baslvl0;beplvl0;bepl
ot1.5-1
Very Low Beeper (Nighttime Mode) beplfn0;beplfr10;beppar0;baspw
r0;beppwr1;baslvl1;beplvl1;bepb
ip1;bepFQ14200;beplot0.5-1
Low Beeper (Daytime Mode)beplfn0;beplfr10;beppar1;baspw
r1;beppwr1;baslvl1;beplvl1;bepb
ip0;bepFQ12700;beplot0.5-2
Temporary...

Page 216

12 - 16
Prefix/Suffix Selections
Add CR Suffix to All Symbologies VSUFCR6-2
Prefix Add Prefix PREBK2##6-2
Clear One Prefix PRECL26-2
Clear All Prefixes PRECA26-2
Suffix Add Suffix SUFBK2##6-2
Clear One Suffix SUFCL26-2
Clear All Suffixes SUFCA26-2
Function Code Transmit *Enable RMVFNC06-3
Disable RMVFNC16-3
Intercharacter Delay Range 0 - 1000 (5ms increments) DLYCHR##6-3
User Specified 
Intercharacter DelayDelay Length
0 - 1000 (5ms increments)DLYCRX##6-4
Character to Trigger Delay DLY_XX##6-4...

Page 217

12 - 17
Symbologies
All Symbologies All Symbologies Off ALLENA08-1
All Symbologies On ALLENA18-1
Codabar Default All Codabar 
SettingsCBRDFT8-2
Off CBRENA08-2
*On CBRENA18-2
Codabar Start/Stop Char.*Don’t Transmit CBRSSX08-2
Transmit CBRSSX18-2
Codabar Check Char.*No Check Char. CBRCK208-2
Validate, But Don’t Transmit CBRCK218-2
Validate, and Transmit CBRCK228-2
Codabar Concatenation *Off CBRCCT08-3
On CBRCCT18-3
Require CBRCCT28-3
Codabar Message Length Minimum (2 - 60)  *4 CBRMIN##8-3
Maximum (2 - 60)...

Page 218

12 - 18
Interleaved 2 of 5 Check Digit*No Check Char. I25CK208-7
Validate, But Don’t 
TransmitI25CK218-7
Validate, and Transmit I25CK228-7
Interleaved 2 of 5 Message Length Minimum (2 - 80)  *4 I25MIN##8-7
Maximum (2 - 80)  *80 I25MAX##8-7
NEC 2 of 5 Default All NEC
2 of 5 SettingsN25DFT8-8
Off N25ENA08-8
*On N25ENA18-8
NEC 2 of 5 Check Digit*No Check Char. N25CK208-8
Validate, But Don’t 
TransmitN25CK218-8
Validate, and Transmit N25CK228-8
NEC 2 of 5 Message Length Minimum (2 - 80)  *4 N25MIN##8-9...

Page 219

12 - 19
Code 11 Default All Code 11 
SettingsC11DFT8-14
*Off C11ENA08-14
On C11ENA18-14
Code 11 Check Digits Required 1 Check Digit C11CK208-14
*2 Check Digits C11CK218-14
Code 11 Message Length Minimum (1 - 80)  *4 C11MIN##8-14
Maximum (1 - 80)  *80 C11MAX##8-14
Code 128 Default All Code 128
Settings128DFT8-15
Off 128ENA08-15
*On 128ENA18-15
ISBT Concatenation *Off ISBENA08-15
On ISBENA18-15
Code 128 Message Length Minimum (0 - 80)  *0 128MIN##8-15
Maximum (0 - 80)  *80 128MAX##8-15
Code 128 Append *On...

Page 220

12 - 20
UPC-A Addenda Required *Not Required UPAARQ08-20
Required UPAARQ18-20
UPC-A Addenda 
SeparatorOff UPAADS08-20
*On UPAADS18-20
UPC-A/EAN-13 with Extended 
Coupon Code*Off CPNENA08-21
Allow Concatenation CPNENA18-21
Require Concatenation CPNENA28-21
Coupon GS1 DataBar Output GS1 Output Off CPNGS108-21
GS1 Output On CPNGS118-21
UPC-E0 Default All UPC-E
SettingsUPEDFT8-22
Off UPEEN008-22
*On UPEEN018-22
UPC-E0 Expand *Off UPEEXP08-22
On UPEEXP18-22
UPC-E0 Addenda Required Required UPEARQ18-22
*Not...
Start reading Honeywell 1900ghd-2 User Manual

Related Manuals for Honeywell 1900ghd-2 User Manual

All Honeywell manuals