honda cbr600rr 2009 owners User Manual

							µ
µ
µ
22
Gauges, Indicators & Displays
Instruments & Controls
Resets the tripmeter to zero (0) (page ).
Also used to change the speed, mileage and
temperature units f or the speedometer/odometer/
tripmeter/coolant temperature meter (pages ).
Also used to set the digital clock (pages ).
14
15 RESET button
SEL button Selects the odometer, tripmeter A and tripmeter B
(page ).
Also used to set the digital clock (pages ). 29
30
31 32 34
29 32 34
——
yy
y
y 
						

							4.76 US gal (18.0)
1.00 US gal (3.8
)
(2)
(3) (1)
(1) fuel gauge liquid crystal display
(2) segment F
(3) segment E
23
Fuel Gauge
Gauges, Indicators & Displays
Instruments & Controls
When segment E ( ) f lashes, you should
refill the tank as soon as possible.
The amount of f uel remaining when the
f lashing starts is approximately: The fuel gauge liquid crystal display ( )
shows the approximate f uel supply
available in a graduated display. When
segment F ( ) goes on, the f uel tank
capacity is:
1
2 3
——
y
y
yy 
						

							24
Gauges, Indicators & Displays
Instruments & Controls
Fuel Gauge Failure Indication
When the fuel system has an error, the
fuel gauge indicators will be displayed as
shown in the illustration. If this occurs, see
your Honda dealer as soon as possible.
——
yy
yy 
						

							(1)(2)
(1) multi-function display
(2) speedometer
(3) odometer/tripmeter
(4) digital clock
(5) coolant temperature meter (5)
(4)(3)
25
Multi-f unction Display
Gauges, Indicators & Displays
Instruments & Controls
The multi-function display ( ) includes
the f ollowing f unctions:
Both the digital clock and tripmeter will
reset if the battery is disconnected.
1
speedometer
odometer/tripmeter
digital clock
coolant temperature meter
——
yy
yy 
						

							µµ
µ µ ª« ª«
(1)
(1) coolant temperature meter Centigrade (°C)
Fahrenheit (°F)
26Coolant Temperature Meter
Gauges, Indicators & Displays
Instruments & Controls
The coolant temperature meter ( ) shows
the coolant temperature digitally.
Temperature Display
USA : Fahrenheit (°F), or
Centigrade (°C).
Canada : Centigrade (°C).
1
‘‘--’’ is displayed.
Actual coolant
temperature is
displayed.
Actual coolant
temperature is
displayed and
flashed.
The display remains
and f lashes
‘‘270 °F (132 °C)’’.
Below
94 °F (34 °C)
Between
95 °F 250 °F
(35 °C 121 °C)
Between
251 °F 269 °F
(122 °C 131 °C)
Above
270 °F (132 °C)
——
y
y
yy 
						

							µ
ª«
ª«Fahrenheit (°F)
Centigrade (°C)
(2)
(2) high coolant temperature indicator
27
Gauges, Indicators & Displays
Instruments & Controls
Continuing to ride with an overheated
engine can cause serious engine damage. Overheating Message:
When the coolant temperature reaches
251°F (122°C), the numbers in the
temperature display start flashing and the
high coolant temperature indicator ( )
comes on.
If this occurs, stop the engine and check
the reserve tank coolant level. Read pages and do not ride the motorcycle
until the problem has been corrected. 2
110 113
——
y
y
yy 
						

							(1)
(1) speedometer
28 Speedometer
Gauges, Indicators & Displays
Instruments & Controls
The speedometer ( ) shows riding speed
in miles or kilometers per hour.
1
——
yy
yy 
						

							(2)
(3)
(4)
(5)
(1) odometer
(2) tripmeter A
(3) tripmeter B (1)
(4) SEL button
(5) RESET button
29
Odometer/Tripmeter A & B
Gauges, Indicators & Displays
Instruments & Controls
The odometer ( ) shows the total miles or
kilometers ridden.
The tripmeter A ( ) and tripmeter B ( )
show number of miles or kilometers
ridden since you last reset the meter.
To select the odometer, tripmeter A or
tripmeter B, push the SEL button ( ).
To reset the tripmeter, push and hold the
RESET button ( ) for more than 2
seconds when the display is in the
tripmeter A or tripmeter B.
1
23
5 4
——
y
y
yy 
						

							(1) RESET button(1)
30Changing the Speed,
Mileage and Temperature Unit
Gauges, Indicators & Displays
Instruments & Controls
The speedometer displays both ‘‘mph’’
and ‘‘km/h.’’
The odometer/tripmeter displays both
‘‘mile’’ and ‘‘km.’’
The coolant temperature meter displays
both ‘‘°F’’ (Fahrenheit) and ‘‘°C’’
(Centigrade).
To select ‘‘mph’’/‘‘mile’’ and ‘‘km/h’’/
‘‘km,’’ push the RESET button ( ) with
the display in the tripmeter A mode.
1
——
yy
yy 
						

							ª«ª «(1)
Fahrenheit (°F) Centigrade (°C)
(1) RESET button
31
Gauges, Indicators & Displays
Instruments & Controls
To select ‘‘°F’’ (Fahrenheit) and ‘‘°C’’
(Centigrade), push the RESET button ( )
with the display in the tripmeter B mode. (USA only) 1
——
yy
yy