Hitachi Projector CP-X8150 User Manual

61
SCREEN menu
ItemDescription
SOURCE NAME (continued )(6) 
 
The current name will be displayed on 
the first line. Use the ▲/▼/◄/► buttons 
and the ENTER or INPUT button to 
select and enter characters. To erase 1 
character at one time, press the RESET 
button or press the ◄ and INPUT button 
at the same time. Also if you move the 
cursor to DELETE or ALL CLEAR on 
screen and press the  ENTER or INPUT 
button, 1 character or all characters will 
be erased. The name can be a maximum 
of 16 characters....

62
SCREEN menu
ItemDescription
C.C.
(Closed Caption) The C.C. is the function that displays a 
transcript or dialog of the audio portion of 
a video, files or other presentation or other 
relevant sounds. It is required to have NTSC 
format video or 480i@60 format component 
video source supporting C.C. feature to 
utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, please turn off the Closed Caption.
DISPLAY
Select Closed Caption DISPLAY setting from...

63
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to execute 
the item, except for the items LAMP TIME and FILTER 
TIME. Then perform it according to the following table.
ItemDescription
SOURCE SKIP The ports can be set to be ignored in searching by the AUTO 
SEARCH function (

below
) or in selecting by buttons on the control 
panel. 
(1)   Choose a picture input...

64
OPTION menu
ItemDescription
DIRECT POWER  ON Using the ▲/▼ buttons turns on/off the DIRECT POWER ON 
function.
ON  ó OFF
When set to the ON, the lamp in projector will be automatically turned 
on without the usual procedure (
 24)
, only when the projector is 
supplied with the power after the power was cut while the lamp was on.
• This function does not work as long as the power has been 
supplied to the projector while the lamp is off.
• After turning the lamp on by the DIRECT POWER ON function,...

65
OPTION menu
ItemDescription
USB TYPE B
Using the ▲/▼ buttons selects the function of USB TYPE B port.  
To use this function, you need to connect the  USB TYPE B port of 
the projector and the type A USB port of a computer.
MOUSE  ó USB DISPLAY
MOUSE:    The accessory remote control works as the simple mouse  
and keyboard of the computer.
USB DISPLAY :   The port works as an input port that receives image  
signals from the computer  (
107).
• It may take several seconds to project the images from...

66
OPTION menu
ItemDescription
MY BUTTON
This item is to assign one of the following functions to  MY BUTTON 
(1 to 4) on the remote control (
 6).
(1)   Use the ▲/▼ buttons on the MY BUTTON menu to select a 
button from MY BUTTON - 1 to 4 and press the ► or  ENTER 
button to display the MY BUTTON setup dialog. 
(2)   Then using the ▲/▼/◄/► buttons sets one of the following 
functions to the chosen button. Press the ENTER or INPUT 
button to save the setting.
SLIDESHOW :  Selects  the  input  from  USB...

67
OPTION menu
ItemDescription
SERVICE Selecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ buttons, 
and press the ► button or the ENTER 
button on the remote control to execute 
the item.
ALTITUDE
Using the ▲/▼ buttons switches the rotation speed of the cooling 
fans. It is recommended to leave it at AUTO usually.
HIGH-2  ó HIGH-1 
ó NORMAL 
ó AUTO 
AUTO:    The projector changes the rotation speed automatically to 
suit the altitude and other environmental factors.  
Choose an...

68
OPTION menu
ItemDescription
SERVICE
(continued) FILTER MESSAGE
Use the ▲/▼ button to set the timer for notifying by the message 
when to replace the filter unit 
CP-X8150, CP-WX8240, CP-SX8350, CP-WU8440: 
1000h 
ó 2000h 
ó 5000h 
ó 10000h 
ó 15000h 
ó OFF
CP-X8160, CP-WX8255, CP-WU8450: 
1000h  ó 2000h 
ó 5000h 
ó 10000h 
ó 15000h 
ó 20000h 
ó OFF
After choosing an item except OFF, the message “REMINDER *** 
HRS PASSED ....” will appear after the timer reaches the interval 
time set by this feature...

69
OPTION menu
ItemDescription
SERVICE
(continued) KEY LOCK
(1)   Use the ▲/▼ buttons to choose the operations control.
CONTROL PANEL  ó REMOTE CONTROL
(2)   Use the ◄/► buttons to select ON or 
OFF.
ON  ó OFF
Selecting ON in Step 2 locks the buttons except  STANDBY, ON 
and STANDBY/ON on the operations control selected in Step 1. 
Selecting OFF releases the locked buttons on the operations control 
selected in Step 1.
• Please use this function to prevent tampering or accidental 
operation. 
• It's...

70
OPTION menu
ItemDescription
SERVICE
(continued)
COMMUNICATION
Selecting this item displays COMMUNICATION 
menu. 
In this menu, you can configure the serial 
communication settings of the projector using the 
CONTROL port.
• Select an item using the cursor buttons ▲/▼. 
Then pressing the ► button opens the submenu 
for the setting item you selected. Or, pressing 
the ◄ button instead of the ► button makes the 
menu back to the previous one without changing 
the setup. Each submenu can be operated as...