Hitachi Projector CP-X8150 User Manual

31
Operating
1.Press POSITION button on the remote control when no menu is indicated.  
The “POSITION” indication will appear on the screen.
Adjusting the position
2.Use the ▲/▼/◄/► cursor buttons to adjust the picture 
position.
When you want to reset the operation, press  RESET 
button on the remote control during the operation.
To complete this operation, press  POSITION button again. Even if you do not do 
anything, the dialog will automatically disappear after a few seconds.
1.Press AUTO button on...

32
Operating
AUTO:  performs the automatic vertical keystone 
correction. (
52)
MANUAL:    allows you to adjust the vertical and horizontal 
keystone.
PERFECT FIT :   
allows you to adjust each of the screen 
corners and sides to correct the 
distortion.
• The menu or dialog will automatically disappear after several seconds 
of inactivity. Press the KEYSTONE button again, or point the cursor at EXIT in 
the dialog and press the ►or  ENTER button to end the operation and close the 
menu or dialog. 
•...

33
Operating
   PERFECT FIT: 
When PERFECT FIT is pointed at, pressing the 
► or ENTER button displays the KEYSTONE_
PERFECT FIT dialog.
This projector is equipped with a test pattern for 
PERFECT FIT. Select the test pattern icon 
 
shown in the lower left of the dialog with the ◄/▼ 
buttons. When you press the ENTER or INPUT 
button, the test pattern appears or disappears.
1.  If it is necessary to initialize the current 
adjustment, point at RESET in the dialog 
with the RESET button, and press the...

34
Operating
Correcting the distortion (continued)
4. This projector is equipped with a memory feature for PERFECT FIT adjustment. Up to 3 sets of adjustments can be stored.
●   SAVE:  
To store the current PERFECT FIT adjustment, select one of the SAVE 
icons 
 numbered 1 to 3 (number of the memory) with the ◄ /▲/▼ buttons 
and press the ENTER or INPUT button.  
Remember that the current data being stored of a memory will be lost by 
saving new data into the memory.
●   LOAD:  
To recall stored...

35
Operating
1.
Using the magnify feature
2.
3.
4.
Press the MAGNIFY ON button on the remote 
control.  
The picture will be magnified, and the MAGNIFY 
dialog will appear on the screen. When the 
MAGNIFY ON button is pressed for the first time 
after the projector is turned on, the picture will be 
zoomed by 1.5 times. On the dialog, triangle marks 
to show each direction will be displayed.
The display magnification of the projector switches in order 
with every press of the MAGNIFY ON button.
  For...

36
Operating
1.Press the SHADE button on the control panel.
The mechanical lens shade closes and the 
screen turns to black. The SHADE indicator on 
the projector blinks in yellow while the shade is 
closed.  
To open the shade and restore the screen, press 
the SHADE button again.
Temporarily shading the screen
• The projector will turn off automatically when the time set up by the 
SHADE TIMER passes 
(64).
• When turning off the power by the normal procedure, the lens shade opens 
automatically. If...

37
Operating
1.To start the MENU, press the MENU button. The MENU you last used (EASY 
or ADVANCED) will appear. EASY MENU has priority to appear just after 
powered on.
Using the menu function
2.(1)  Use the ▲/▼ cursor buttons to select an item to operate. If you want to change it to the ADVANCED 
MENU, select the ADVANCED MENU.
(2)  Use the ◄/► cursor buttons to operate the item.
This projector has the following menus: 
PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK, 
SECURITY and EASY...

38
Operating
Using the menu function (continued)
3.To close the MENU, press the MENU button again or select EXIT and press 
the ◄ cursor button or ENTER button. Even if you do not do anything, the 
dialog will automatically disappear after about 30 seconds.
●  If you want to move the menu position, use the 
cursor buttons after pressing the POSITION button.
●   Some functions cannot be performed when a 
certain input port is selected, or when a certain 
input signal is displayed.
●   When you want to...

39
Operating
Using the menu function (continued)
Containing items of  each menu
The items contained in the menus are as below;
MenuItems
EASY MENU (
 40) ASPECT, AUTO KEYSTONE, 
 KEYSTONE,  KEYSTONE, 
PERFECT FIT, PICTURE MODE, ECO MODE, INSTALLATION, 
RESET, FILTER TIME, LANGUAGE, ADVANCED MENU, EXIT
PICTURE  (
42) BRIGHTNESS, CONTRAST, GAMMA, COLOR TEMP, COLOR, 
TINT, SHARPNESS, ACTIVE IRIS, MY MEMORY
IMAGE  (
45) ASPECT, OVER SCAN, V POSITION, H POSITION, H PHASE, 
 
H SIZE, AUTO ADJUST EXECUTE...

40
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then 
perform it according to the following table.
ItemDescription
ASPECT Using the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu (

45).
AUTO KEYSTONE Using the ► button executes the auto keystone function.See the AUTO KEYSTONE item in SETUP menu (
52).
 KEYSTONE Using the ◄/► buttons corrects the vertical keystone distortion.
See...