Hitachi Projector CP-WX5500 User Manual

71
SETUP menu
ItemDescription
PICTURE 
POSITION Using the ▲/▼/◄/►
 cursor buttons selects the desirable picture 
position.
The PICTURE POSITION is not changed if any of the following
cases apply.
・  There is no non-display area (black display or background display) 
or it is not displayed on the screen.
• One of the following messages is displayed on the screen:
"NO INPUT IS DETECTED"
"SYNC IS OUT OF RANGE"
"INVALID SCAN FREQ."
• The BLANK or TEMPLATE function is selected....

72
SETUP menu
ItemDescription
STANDBY MODE Using ▲/▼ buttons switches the standby mode setting between
NORMAL and SAVING.
NORMAL  ó SAVING
• When SAVING is selected, the RS-232C communication control 
except to turn the projector on and the network function are disabled 
while the projector is in the standby mode. If the COMMUNICATION 
TYPE in the COMMUNICATION menu is set to NETWORK 
BRIDGE, all of the RS-232C commands are disabled (
 90
).
• When SAVING is selected, STANDBY OUTPUT is invalid.
• When...

73
SETUP menu
ItemDescription
OSD MESSAGE Using the ▲/▼ buttons turns on/off the message function.
NORMAL  ó SILENT 
ó INHIBIT
 
  
 
■SILENT : The following message functions do not work.
“AUTO IN PROGRESS” while automatically adjusting.
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“INVALID SCAN FREQ.”
“NOT AVAILABLE”
“Searching….” while searching for the input.
“Detecting….” while an input signal is detected.
The indication of the input signal displayed by changing.
The indication of the aspect ratio...

74
SETUP menu
ItemDescription
HDMI OUTPUT
To select the image output on the HDMI OUT in the normal operation.
STANDBY  OUTPUT
AUDIO OUT
To select the sound output in the standby mode. 
MONITOR OUT
To select the image output on the MONITOR OUT in the standby mode.
HDMI OUT
To select the image output on the HDMI OUT in the standby mode.
•  When the STANDBY MODE is set to SAVING, the STANDBY 
OUTPUT menu can not be operated. 

75
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table below 
can be performed. Select an item using the ▲/▼ cursor 
buttons, and press the ► cursor button or the ENTER 
button to execute the item. Then perform it according to 
the following table.
 
ItemDescription
VOLUME Using the ◄/► buttons adjusts the volume of the audio output.
Low  ó High
SPEAKER Using the ▲/▼ buttons turns on/off the built-in speaker.
ON  ó OFF
When OFF is selected, the built-in speaker does not work.
AUDIO SOURCE...

76
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
LANGUAGE Using the ▲/▼/◄/► buttons switches the OSD (On Screen 
Display) language.
ENGLISH  ó FRANÇAIS 
ó DEUTSCH 
ó  ESPAÑOL
       
   (shown in the LANGUAGE dialog)   
Press the 
ENTER or  button to save the language setting....

77
SCREEN menu
ItemDescription
AUTO BLANK Using the ▲/▼ buttons switches the mode for the AUTO BLANK 
screen.
BLUE  ó WHITE 
ó BLACK
       
• To avoid remaining as an afterimage, displayed image will change
to the designated blank color screen by AUTO BLANK after several
minutes at the following conditions.
- When MyScreen or ORIGINAL is displayed as BLANK screen.
- When start-up screen is displayed.
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a...

78
SCREEN menu
ItemDescription
MyScreen This item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and START UP 
screen. Display the image you want to capture before executing the 
following procedure.
(1)  
Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from 
the current screen. Please wait for the target image to be displayed, and press the 
ENTER  or 
 button when the image is displayed. The...

79
SCREEN menu
ItemDescription
MyScreen Lock Using the ▲/▼ buttons turns on/off the MyScreen lock function.
ON  ó OFF
When the ON is selected, the item MyScreen is locked. Use this 
function for protecting the current MyScreen.
• This function cannot be selected when the ON is selected to the 
MyScreen PASSWORD item in SECURITY menu (
 97
).
SOURCE NAME Each input port for this projector can have a name applied to it.
(1)  
Use the ▲/▼ buttons on the SCREEN menu to select SOURCE 
NAME and press the ► or...

80
SCREEN menu
ItemDescription
SOURCE NAME (continued )(6) 
 
The current name will be displayed 
on the first line. Use the ▲/▼/◄/► 
buttons and the  ENTER or 
 button to 
select and enter characters. To erase 1 
character at one time, press the  RESET 
button or press the ◄ and 
 button 
at the same time. Also if you move the 
cursor to DELETE or CLEAR ALL on 
screen and press the  ENTER or 
 
button, 1 character or all characters will 
be erased. The name can be a maximum 
of 16 characters.
(7)    To...