Hitachi Projector CP-WU5500 User Manual

81
SCREEN menu
ItemDescription
C.C.
(Closed Caption) The C.C. is the function that displays a 
transcript or dialog of the audio portion of 
a video, files or other presentation or other 
relevant sounds. It is required to have NTSC 
format video or 480i@60 format component 
video source supporting C.C. feature to 
utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, please turn off the Closed Caption.
DISPLAY
Select Closed Caption DISPLAY setting from...

82
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
SOURCE SKIP The ports can be set to be ignored in searching by the AUTO 
SEARCH function 
(
below
) or in selecting by buttons on the control 
panel. 
(1)   Choose a picture input port using the ▲/▼ buttons.
(2)   Using the...

83
OPTION menu
ItemDescription
DIRECT POWER  ON Using the ▲/▼ buttons turns on/off the DIRECT POWER ON 
function.
ON  ó OFF
When set to the ON, the lamp in projector will be automatically turned 
on without the usual procedure (
 30
), only when the projector is 
supplied with the power after the power was cut while the lamp was on.
• This function does not work as long as the power has been 
supplied to the projector while the lamp is off.
• After turning the lamp on by the DIRECT POWER ON function,...

84
OPTION menu
ItemDescription
MY BUTTON
This item is to assign one of the following functions to  MY BUTTON 
( 1  to  2) on the remote control (
 7
).
(1)   Use the ▲/▼ buttons on the MY BUTTON menu to select a 
button from MY BUTTON - 1 to 4 and press the ► or  ENTER 
button to display the MY BUTTON setup dialog. 
(2)   Then using the ▲/▼/◄/► buttons sets one of the following 
functions to the chosen button. Press the  ENTER or 
 button to 
save the setting.
MY IMAGE : Displays the MY IMAGE menu.(
5....

85
OPTION menu
ItemDescription
SCHEDULE
■ How to setup the item
1. Use the ▲/▼/◄/► cursor buttons to select or adjust.
2. Select OK to finish the settings.
(continued on next page)
■ How to activate (DATE AND TIME / SPECIFIC DATE)
Place a check mark in the box.
Check mark 
in the box
Date and first 
setup info could 
be seen with the 
check mark.
Item Description
DATE & TIME Set the DATE(Year/Month/Date) and Time(24-
hour scale).
SPECIFIC DATE 
Set specific date from 1 to 10.
PROGRAM EDIT The TIME and...

86
OPTION menu
ItemDescription
SCHEDULE  (continued)
■ PROGRAM EDIT
The TIME and EVENT for Program 1 to 16 can be edited.
• RETURN
Select this to go back 
to the top menu of the 
SCHEDULE.
• SELECT
Select from PROGRAM-01 
 to 16 to edit. 
Each PROGRAM can be 
 setup up to 20 settings.
• COPY TO
The selected program 
(with the settings of TIME 
and EVENT) can be 
copied to other program.
• APPLY
Select this to apply and 
save all adjustments and 
settings.
(continued on next page)
Check mark 
in the box...

87
OPTION menu
ItemDescription
SCHEDULE  (continued)
■ How to edit the selected PROGRAM
1.   Select from 1 to 20 events.  
Use the ▲/▼ cursor buttons to select.  
Press ► cursor button to set the TIME and EVENT.
2. Use the ◄/► cursor   
buttons to select.
3. Use the ▲/▼ cursor   
buttons to adjust.
EVENT can be selected as listed below.
◦ POWER − ON, STANDBY
◦ INPUT SOURCE − "input source" channel
◦ MY IMAGE − IMAGE-1 to 4, IMAGE OFF
◦ MESSENGER − TEXT-1 to 12, TEXT OFF
◦   ECO MODE −   NORMAL,...

88
OPTION menu
ItemDescription
SERVICE Selecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ buttons, 
and press the ► button or the 
ENTER 
button on the remote control to execute 
the item.
ALTITUDE
Using the ▲/▼ buttons switches the rotation speed of the cooling 
fans. If the projector is used at an altitude of about 1600 m or higher, 
select HIGH. Otherwise, select NORMAL. Note that the projector is 
noisier when the HIGH is selected.
HIGH  ó NORMAL
AUTO ADJUST
Using the ▲/▼...

89
OPTION menu
ItemDescription
SERVICE
(continued) KEY LOCK
(1)   Use the ▲/▼ buttons to choose the operations control.
CONTROL PANEL  ó REMOTE CONTROL
(2)   Use the ◄/► buttons to select ON or 
OFF.
ON  ó OFF
Selecting ON in Step 2 locks the buttons except  STANDBY/ON on 
the operations control selected in Step 1.
 Selecting OFF releases the locked buttons on the operations 
control selected in Step 1.
• Please use this function to prevent tampering or accidental 
operation. 
• It's not possible to...

90
OPTION menu
ItemDescription
SERVICE
(continued)
COMMUNICATION
Selecting this item displays COMMUNICATION 
menu. 
In this menu, you can configure the serial 
communication settings of the projector using the 
CONTROL  port.
• Select an item using the cursor buttons ▲/▼. 
Then pressing the ► button opens the submenu 
for the setting item you selected. Or, pressing 
the ◄ button instead of the ► button makes the 
menu back to the previous one without changing 
the setup. Each submenu can be operated as...