Hitachi Projector CP-WU5500 User Manual

61
IMAGE menu
ItemDescription
OVER SCAN Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture)  ó Large (It reduces picture)
• This item can be selected for a video signal.
• 
For HDMITM, MHL and HDBaseTTM signals, this item can also be 
selected if either (1) or (2) applies.
(1)   DIGITAL FORMAT item in the INPUT menu for selected port is 
set to VIDEO.
(2)   DIGITAL
 FORMAT item in the INPUT menu for selected port is 
set to AUTO, and the projector recognizes that it receives...

62
IMAGE menu
ItemDescription
H PHASE
Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker.
Right  ó Left
• This item can be selected only for a computer signal or a 
component video signal. 
• This function is unavailable for a signal from the  LAN, HDMI 1 / 
MHL, HDMI 2 or  HDBaseT port.
H SIZE Using the ◄/► buttons adjusts the horizontal size.
Small  ó Large
• This item can be selected only for a computer signal. 
• This function is unavailable for a signal from the  LAN, VIDEO,...

63
INPUT menu
INPUT menu
From the INPUT menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
PROGRESSIVE Using the ▲/▼ buttons switches the progress mode.
TV  ó FILM 
ó OFF
  
• This function works only for a video signal, component video signal  
(of 480i@60 or 576i@50 or 1080i@50/60), an HDMITM signal  
(of 480i@60 or...

64
INPUT menu
ItemDescription
VIDEO FORMAT The video format for 
VIDEO port can be set.
Using the ◄/► buttons  
switches the mode for video 
format.
AUTO   ó  NTSC  
ó  PAL  
ó  SECAM
       N-PAL  ó M-PAL 
ó NTSC4.43 
• This item is performed only for a video signal from the  VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the 
picture becomes unstable (e.g. an irregular picture, lack of color), 
please select the mode...

65
INPUT menu
CP-WU5505/CP-WX5505CP-X5555
Item Description
DIGITAL RANGE
The digital range of HDMITM/MHL input signals from the  HDMI 1/
MHL, HDMI 2  and HDBaseTTM ports can be set.
(1)   Use the ▲/▼ buttons to select the port to be set.
(2)   Use the ◄/►buttons to select the digital range.
AUTO  ó NORMAL 
ó ENHANCED
AUTO:   automatically sets the optimum mode.
NORMAL:   sets the suitable mode for DVD signals. (16-235)
ENHANCED :  
sets the suitable mode for computer signals. (0-255)
• If the contrast of...

66
INPUT menu
ItemDescription
RESOLUTION The resolution for the 
COMPUTER IN input signal can be set on this 
projector.
(1)   In the INPUT menu select the RESOLUTION using the ▲/▼ 
buttons and press the ► button. 
The RESOLUTION menu will be   
displayed.
(2)   In the RESOLUTION menu select the 
resolution you wish to display using 
the ▲/▼ buttons.   
Selecting AUTO will set a resolution 
appropriate to the input signal.
(3)   Pressing the ► or  ENTER button when 
selecting a STANDARD resolution will...

67
INPUT menu
ItemDescription
PbyP / PinP  
SETUP PinP POSITION
Using ▲/▼ buttons on the remote control changes the position of 
sub area in PinP mode (
50).
PbyP / PinP FRAME LOCK
Select the screen that enables FRAME LOCK function when using 
PbyP or PinP.
LEFT / PRIMARY: Enables FRAME LOCK function for input on left 
screen of PbyP or on primary area of PinP.
RIGHT / SECONDARY: Enables FRAME LOCK function for input on 
right screen of PbyP or on secondary area of PinP.
MHL STANDBY PWR. Using the ▲/▼...

68
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
GEOMETRY  
CORRECTION KEYSTONE
Selecting this item displays the KEYSTONE dialog.
For details, see KEYSTONE in  Correcting the distortion(
38).
• When the zoom adjustment is set to the TELE (telephoto focus), 
this function may be...

69
SETUP menu
ItemDescription
GEOMETRY  
CORRECTION (continued) PATTERN
Select PATTERN with ▲/▼ 
buttons.
Displayed pattern [Off/1/2/3/4/5/6] can be switched with  ◄/► buttons.PATTERN 1: Frame
PATTERN 2: Red Grid
PATTERN 3: Green Grid
PATTERN 4: Blue Grid
PATTERN 5: Vertical 9 steps
PATTERN 6: Horizontal 9 steps
OFF:  Displays the input  signal.
LAMP & FILTER Selecting this item displays the LAMP 
& FILTER menu.
Select an item using the ▲/▼ buttons, 
and press the ► button or the 
ENTER 
button on the...

70
SETUP menu
ItemDescription
LAMP & FILTER (continued) FILTER TIME
The filter time is the usage time of the air filter, counted after the last 
resetting. It is shown in the 
LAMP & FILTER menu.
Pressing the  RESET button on the remote control or the ► button 
of the projector displays a dialog. 
To reset the filter time, select the OK using the ► button.
CANCEL  ð OK
• Please reset the filter time only when you have cleaned or 
replaced the air filter, for a suitable indication about the air filter.
•...