Hitachi Projector CP-D27WN User Manual

91
Presentation tools
PC-LESS Presentation (continued)
Button operationFunctions
The remote 
control Control panel
Web Remote 
Control
▲ ▲[▲]
 (Play) /  (Pause) toggle
►►[►] (FF) Fast-forward
◄◄[◄] (REW) Fast-rewind
ENTERINPUT[ENTER] (Stop), Displays Thumbnail.
PAGE DOWN –[PAGE DOWN]
Shows the next file.
PAGE UP –[PAGE UP]Shows the previous file.
• These operations are not accessible while the projector OSD is displayed.
• It is not possible to change the input port by using the  INPUT button when the...

92
Presentation tools
PC-LESS Presentation (continued)
Slideshow mode
While the Slideshow is displayed, the following button operations are enabled 
when still images are displayed, and the same button operations in the Full 
Screen mode are enabled when movies are displayed. 
• These operations are not accessible while the projector OSD is 
displayed.
• It is not possible to change the input port by using the  INPUT button when the 
Thumbnail screen, Slideshow, or Full Screen is displayed.
•  When the...

93
Presentation tools
PC-LESS Presentation (continued)
You can play the Slideshow at your desired configuration. 
Configure the Slideshow items in the Thumbnail.
1) RETURN  : 
Returns to the thumbnail mode.  
2) PLAY    :  Play the Slideshow.
3) START    :  
Set the beginning number of the 
Slideshow.
4) STOP   : Set the end number of the Slideshow.
5) INTERVAL   :  Sets the interval time for displaying still 
images during the Slideshow. 
It is not recommend to set the interval 
time very short...

94
Presentation tools
PC-LESS Presentation (continued)
Playlist
The Playlist is a DOS format text file, which decides the order of displayed still 
image files in the Thumbnail or Slideshow.
The playlist file name is “playlist.txt” and it can be edited on a computer.  
It is created in the folder that contains the selected image files when the PC-LESS 
Presentation is started or the Slideshow is configured.
[Example of “playlist.txt” files] 
START setting : STOP setting : INTERVAL setting : PLAY MODE...

95
Presentation tools
USB Display(Windows computer)
The projector can display images transferred from a computer via an USB cable (11).
Select the USB DISPLAY for the USB TYPE B item in the OPTION menu.
When you connect your computer to the  USB TYPE B port on the projector 
using a USB cable, the projector will be recognized as a CD-ROM drive on your 
computer. Then, the software in the projector, “LiveViewerLiteForUSB.exe”, will 
run automatically and the application, “LiveViewer Lite for USB”, will...

96
Presentation tools
This application will appear in the Windows 
notification area once it starts. You can quit the 
application from your computer by selecting “Quit” on 
the menu.
• The “LiveViewer” (refer to the  
Network Guide) and this application cannot 
be used at the same time. If you connect your 
computer to the projector by using a USB cable 
while the “LiveViewer” is running, the following message will be displayed.
• Depending on the software installed on your computer, images on your...

97
Presentation tools
Display :  
The Floating menu is displayed, and the icon disappears from the 
Windows notification area.
Quit  :   The application is closed, and the icon disappears from the Windows 
notification area.
The menu shown in the right will be displayed 
when you right-click the application icon in the 
Windows notification area. USB Display(Windows computer) (continued)
Right-Click menu
• If you wish to restart the application, you need to unplug the USB 
cable and plug it again. NOTE...

98
Presentation tools
If you select the Option button on the Floating 
menu, the Options window is displayed.
Optimize Performance
The “LiveViewer Lite for USB” captures  
screenshots in JPEG data and sends them to   
the projector. The “LiveViewer Lite for USB” has   
two options that have different compression rate   
of JPEG data.  Transmission speedSpeed takes priority over Image quality. 
It makes JPEG compression rate higher.
The screen on the projector is rewritten quicker because the transferred...

99
Presentation tools
USB Display(Mac computer)
The projector can display images transferred from a computer via an USB cable (10).
• The image transmission from the computer is suspended while the 
password-protected screen saver is running.  To resume the transmission, exit 
the screen saver.
• 
If "Waiting for connection." remains displayed while the USB cable is connected, 
remove the USB cable and reconnect after a while.
• Check our web site for the latest version of the software and its...

100
Presentation tools
• The “LiveViewer” (refer to the  
Network Guide) and this application cannot be 
used at the same time. If you connect your computer 
to the projector by using a USB cable while the 
“LiveViewer” is running, the following message will 
be displayed.
• Depending on the software installed on your computer, images on your 
computer cannot be transferred using  “LiveViewer Lite for USB”.
• If any application software having the firewall function is installed into your 
computer, make...