Hitachi Projector CP-BW301Wn User Manual

							1
Projector
CP-BX301WN/CP-BW301WN
User's Manual (detailed)  
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this 
product. Be sure to read “Safety Guide” first. After reading them, store them in a 
safe place for future reference. WARNING
• The information in this manual is subject to change without notice.
• The illustrations in this manual are for illustrative purposes. They may differ 
slightly from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in 
this manual.
• The reproduction, transfer or copy of all or any part of this document is not 
permitted without express written consent. NOTE
Various symbols are used in this manual. The meanings of these symbols are 
described below. 
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly 
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly 
result in personal injury or physical damage due to incorrect 
handling.
Please refer to the pages written following this symbol.

NOTICE
This entry notices of fear of causing trouble. 
						

							2
Contents
Introduction  . . . . . . . . . . . . . . . 3
Features  ...................... 3
Checking the contents of package ...3
Fastening the lens cover  ..  . . .  . .  .  . ..4 
Part names  .................... 5
Setting up   . . . . . . . . . . . . . . . .  .8
Arrangement  ................... 8
Connecting with your devices .....10
Connecting to a power supply .....16
Using the security bar and slot  ....16
Remote control   . . . . . . . . . . . .17
Installing the batteries  ...........17
About the remote control signal  ...18
Changing the frequency of remote control signal . .18
Using as a simple PC mouse & keyboard . . 19
Power on/off   . . . . . . . . . . . . .  .20
Operating   . . . . . . . . . . . . . . .  .22
Adjusting the volume  ............22
Temporarily muting the screen and 
audio output  .................. 22
Selecting an input signal  .........23
Selecting an aspect ratio  .........23
Adjusting the projector's elevator  . .24
Adjusting the zoom and focus  .....24
Using the automatic adjustment feature ...25
Using the TEMPLATE feature ..... 26
Other buttons  ................. 26
Adjusting the position  ...........27
Correcting the keystone distortions . .27
Using the magnify feature  ........28
Temporarily freezing the screen  ...29
Using the menu function   ........30
EASY MENU .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 32
Aspect, D-zoom,  Keystone, picture 
moDe, eco moDe, instAllA tion, reset, 
F
ilter time,  lA ngu Age, AD vA nce D menu, 
e
xit
PICTURE menu   . . . . . . . . . . . .34
Brightness, contrAst, hDcr, 
AccentuAlizer, gAmmA, color temp,  
color,  tint,  sh Arpness, Active iris, my memory
IMAGE menu   . . . . . . . . . . . . .  .37
Aspect, over scAn, v position, h position,  
h phAse, h size, Auto ADjust execute

INPUT menu   . . . . . . . . . . . . .  .40
progressive, viDeo nr, color sp Ace,  
viDeo FormA t, hDmi FormAt, hDmi rAnge, 
c
omputer in, FrAme locK, resolution
SETUP menu   . . . . . . . . . . . . .  .44
D-zoom, D-shiFt, picture position /pic.
tposit.h,  Keystone,lAmp&Filter, imAge 
o
ptimizer,inst AllA tion, stAnDBy moDe
AUDIO menu   . . . . . . . . . . . . .  .50
volume, speAKer, AuDio source, mic  
level, mic volume
SCREEN menu   . . . . . . . . . . . .  .52
lAnguAge, menu position, BlAnK,  
Auto BlAnK, st Art up, MyScreen,  
MyScreen Lock, messAge, source nAme,  
templA te, c.c.
OPTION menu   . . . . . . . . . . . .  .58
Auto seArch, Direct power on,  
Auto power oFF, my Button, scheDule, 
s
ervice 
NETWORK menu  . . . . . . . . . .  .72
SECURITY menu   . . . . . . . . . . .73
security p AssworD chAnge,  
MyScreen pAssworD, pin locK,  
my text pAssworD, my text DisplA y,  
my text writing, cloning locK
Presentation tools   . . . . . . . . .78
PC-LESS Presentation
 ........... 78
USB Display (Windows computer) ...88
USB Display (Mac computer) ....... 92
Maintenance   . . . . . . . . . . . . .  .96
Replacing the lamp  .............96
Cleaning and replacing the air filter  . .98
Replacing the internal clock battery ...100
Other care ................... 101
Troubleshooting   . . . . . . . . . .102
Related messages  ............102
Regarding the indicator lamps  ...104
Resetting all settings  ...........107
Phenomena that may be easy  to 
   
be mistaken for machine defects . . 107
Specifications  . . . . . . . . . . .  .113
 
						

							3
Introduction
• Keep the original packing materials, for future reshipment. Be sure 
to use the original packing materials when moving the projector. Use special 
caution for the lens. NOTE
Introduction
The projector provides you with the broad use by the following features.
Checking the contents of  package
ü      The unique optics system produces a large projected image in a short 
distance, which provides you with various ways of use.
ü     
This projector has a variety of I/O ports that supposedly cover for any 
business scene.
ü     
The HDMI port can support various image equipment which have digital 
interface to get clearer pictures on a screen.
ü     
Has an HDCR and an ACCENTUALIZER features which are Hitachi's original 
image stabilizer for a clearer image.
ü      
This projector can be controlled and monitored via LAN connection. 
Furthermore, you can use the designated USB wireless adapter (optional) to 
establish wireless LAN connection.
ü       The built-in 16W speaker can deliver sufficient sound volume in a large 
space like a classroom without external speakers.
ü      
This projector's network supports the PJLink™ standard.PJLink™ is a unified 
standard for operating and controlling data projectors.For specifications of 
PJLink™, see the web site of the PJLink™.
Please see the  Contents of package  section in the User’s Manual (concise)  
which is a book. Your projector should come with the items shown there.  Require 
of your dealer immediately if any items are missing.
Features
ü  Equipped with IMAGE OPTIMIZER which is Hitachi's original function to
   maintain visibility by automatic image correction in accordance with lamp
   deterioration. 
						

							4
                                                                                                                Introduction 
Fastening the lens cover
To avoid losing the cover, please fasten the lens 
cover to the projector using the included strap.Put the strap end into the slit of the lens 
cover with the knot on the side of the lens. 
Make sure that the strap is inserted to the 
end of the slit. Fasten the strap to the strap hole as shown 
in the figure for step 1. Please note that the 
knot on the strap is used to fasten it to the 
lens cover in step 2.
1.
2.
►Do not hang the 
lens cover in front of the lens when the 
projector is mounted upside down such as 
when mounted on the ceiling. Otherwise, 
the lens cover may block the light from the 
projector or hit the lens, which may cause 
damage to it. When mounting the projector 
upside down, hang the lens cover on the 
side of the projector or place it on the 
projector. For instance, let the strap put 
through the concave portion around the 
security bar to hang the lens cover (refer 
to the figure).
►Be careful not to damage the lens while 
handling the lens cover. CAUTION
Lens cover
Strap slit
Strap hole
Strap
12
Insert the upper tab (1 part) of the lens cover 
between the upper case and lens as shown 
in the figure for step 3. Then, fit the right/left 
tabs (2 parts) to attach the lens cover.3.
Upper tab
Right/Left tabsUpper case
Lens
3 
						

							5
Introduction
(1) Control panel (6)
(2)   Lamp cover (
96) 
The lamp unit is inside.
(3) Remote sensor (
18)
(4) Lens (
101)
(5)   AC (AC inlet) (
16)
(6) Ports (
6)
(7) Exhaust vent
(8) Speaker (
13, 22, 50)
(9) Elevator feet (x 2) (
24)
(10) Spacer (
24)
(11 ) Security slot (
16)
(12) Security bar (
16)
(13) Strap hole (
4)
(14) FOCUS ring (
25)
(15)   Filter cover (
98) 
The air filter and intake 
vent are inside.
(16) Intake vents
(17) Battery Cover (
100)
►HOT! : Do not touch around the lamp cover and the exhaust 
vents during use or just after use, since it is too hot.
►Do not look into the lens or vent while the lamp is on, since the projection ray 
may cause a trouble on your eyes.
►Do not use the security bar and slot to prevent the projector from falling down, 
since it is not designed for it.
►Keep any object away from concentrated projection light beam. Blocking the 
beam by something causes high temperature and could result in fire or smoke. WARNING
►Maintain normal ventilation to prevent the projector from 
heating up. Do not cover, block or plug up the vents. Do not place anything that 
can stick or be sucked to the vents, around the intake vents. Clean the air filter 
periodically. CAUTION
Part names
Projector
(14)
(16)
(3)
(5)
HOT!HOT!
(2)
(1)
(9) (10)
(6)
(12)
(11)
(7)
(15)
(8)
(4)
(13)
(17)
(16) 
						

							6
Introduction
Control panel
(1) STANDBY/ON button (
20)
(2) INPUT button (
23)
(3) POWER indicator (
20, 104)
(4) TEMP indicator (
104)
(5) LAMP indicator (
104)
      Buttons ◄/►/▲/▼
(6)   MENU / Cursor button (
30)
      when no menu is displayed (
30), or
    Cursor ▲/▼ buttons
      when a menu is displayed (
30).
    The ◄/►/▲/▼ buttons on the projector work only as the cursor buttons while 
the template is displayed (
56).
Ports (
10 ~ 15)
(1)  USB TYPE A  port (x2)
(2)  LAN   port 
(3) HDMI port (x2)
(4)  USB TYPE B  port 
(5) MIC port 
(6) AUDIO IN1 port 
(7) AUDIO IN2(L,R)  ports  (8)  
AUDIO OUT (L,R)  ports
(9) COMPUTER IN1 port 
(10) COMPUTER IN2/MONITOR OUT port 
(11) VIDEO IN  port
(12) CONTROL port
(6)
(3)
(8)(10)(9)
(7)(4)(1)
(2)
(5)
(1) (2) (3)(5)
(4)(6)
Part names (continued)
(12)(11) 
						

							7
Introduction
Part names (continued)
Remote control
(1) INPUT button (
23)
(2) IWB button *
(3) CALIBRATION button *
(4) STANDBY/ON button (
20)
(5) ASPECT button (
23)
(6) AUTO button (
25)
(7) ACCENTUALIZER button (
26)
(8) HDCR  button (
26)
(9) D-ZOOM -  button (
24) 
(10) D-ZOOM +  button (
24) 
(11) PAGE UP button (
19) 
(12) MAGNIFY - ON button (
28) 
(13) MY BUTTON - 1 button (
60) 
(14) VOLUME + button (
22) 
(15) PAGE DOWN button (
19)
(16) MAGNIFY - OFF  button (
28)  
(17) MY BUTTON - 2 button (
60) 
(18) VOLUME - button (
22)
(19) KEYSTONE button (
27)
(20) TEMPLATE button (
26)
(21) FREEZE button (
29)
(22) AV MUTE button (
22) 
(23) ESC button (
30) 
(24) MENU button (
30, 31) 
(25) ENTER button (
30, 31)
(26) POSITION  button (
27, 31)
(27) RESET button (
30)
(28) ▲/▼/◄/► cursor buttons (
30)
(29) Battery cover (
17)
Back of  
the remote control (29)
CALIBRATION
ASPECTACCENTUALIZERHDCR
AV MUTE
POSITIONESC
MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP1
2
ENTER
D-ZOOM- +
＋
ー
VOLUMEMAGNIFYMYBUTTON
INPUT
KEYSTONETEMPLATE
(2)
(1)
(6)
(5)
(11)
(12)
(15)
(16)
(19)
(20)
(23)
(28)
(26) (3)
(4)
(7)
(8)
(9)
(10)
(14)
(13)
(18)
(17)
(22)
(21)
(24)
(25)
(27)
•
 Any button marked with “*” is not supported on this projector ( 103).
NOTE 
						

							8
Setting up
Setting up
(continued on next page) Install the projector according to the environment and manner the projector will be 
used in.
Arrangement
Refer to table T- 1 or T-2  and figures  F-1 and  F-2 at the end of User’s Manual (concise) to 
determine the screen size and projection distance.
The values shown in the table are calculated for a full size screen.
  
a  Screen size (diagonal)  b  Projection distance (±8%)   c1 , c2  Screen heigh t (±8%)
•  For the case of installation in special conditions such as on the wall or ceiling, the 
specified mounting accessories and service may be required.  Tabletop use must be 
setup with the designated optional accessories.  Before installing the projector, consult 
your dealer about your installation.
•   
The screen position may shift after installation if the projector is mounted on locations 
such as the wall or ceiling, due to the flexibility of the plastic projector body. If readjustment 
is necessary, consult with your dealer or service personnel.
•    The projected image position and/or focus may change during warm-up (approx. 30 
minutes after the lamp is turned on) or when the ambient conditions change. Readjust 
the image position and/or focus as necessary.
•    Since the projector features an ultra short throw, be aware that it is required to select a 
screen carefully to have better performance. - A soft screen such as a pull-down screen may cause serious distortion of a projected 
image. A hard screen such as a board screen is recommended for use with this 
projector.
- A high-gain screen such as a bead screen that has narrow viewing angle is not suitable 
for this projector. A low-gain screen (around 1.0) such as a matte screen that has wide 
viewing angle is recommended for use with this projector.
- 
A screen with a weave pattern may cause moiré on the projected image, which is not a 
failure of the projector. A screen that has less moiré effects is recommended for use with this 
projector.
►Place the projector in a stable horizontal position. If the 
projector falls or is knocked over, it could cause injury and/or damage to the 
projector. Using a damaged projector could then result in fire and/or electric shock.
•   Do not place the projector on an unstable, slanted or vibrational surface such 
as a wobbly or inclined stand.
•   Do not place the projector on its side or front position. To place the projector 
on its rear position for the table top use, it is required to use the designated 
optional parts. Consult with your dealer.
•   Consult with your dealer before a special installation such as on the wall or 
ceiling. WARNING 
						

							9
Setting up
Arrangement (continued)
(continued on next page)
►Place the projector in a cool place, and ensure that there is 
sufficient ventilation. The high temperature of the projector could 
cause fire, burns and/or malfunction of the projector.
•   Do not stop-up, block or otherwise cover the projector's vents.
•   Keep a space of 30 cm or more between the sides of the projector and other 
objects such as walls.
• Do not place or attach anything that would block the projection window or vent 
holes.
• Do not place the projector on metallic thing or anything weak in heat.
•   Do not place the projector on carpet, cushions or bedding.
•   Do not place the projector in direct sunlight or near hot objects such as heaters. 
Do not place the projector where the air from an air conditioner or similar unit 
will blow on it directly.
•  
Do not place anything near the projection window or vents, or on top of the 
projector.
•  Do not place anything that may be sucked into or stick to the vents on the 
bottom of the projector. This projector has some intake vents also on the bottom.
►Do not place the projector anyplace where it may get wet. Getting the projector 
wet or inserting liquid into the projector could cause fire, electric shock and/or 
malfunction of the projector.
•   Do not place the projector in a bathroom or the outdoors.
•   Do not place anything containing liquid near the projector.
•  
Do not place the projector where any oils, such as cooking or machine oil, are used.
►Use only the mounting accessories the manufacturer specified, and leave installing 
and removing the projector with the mounting accessories to the service personnel.
•   Read and keep the user’s manual of the mounting accessories used.WARNING
►Avoid placing the projector in smoky, humid or dusty place. 
Placing the projector in such places could cause fire, electric shock and/or 
malfunction of the projector.
• Do not place the projector near humidifiers, smoking spaces or a kitchen.  Also 
do not use an ultrasonic humidifier near the projector. Otherwise chlorine and 
minerals contained in tap water are atomized and could be deposited in the 
projector causing image degradation or other problems.
►
Position the projector to prevent light from directly hitting the projector's remote sensor.
►Do not place the product in a place where radio interference may be caused.
►Do not place this product in a magnetic field.
►
If the projector is used at an altitude of about 1600 m or higher, set ALTITUDE 
of the SERVICE item in the OPTION menu to HIGH
 (64). Otherwise, set it to 
NORMAL.  
If the projector is used with a wrong setting, it may cause damage to the projector 
itself or the parts inside.
CAUTION 
						

							10
Setting up
Before connecting the projector to a device, consult the manual of the device to 
confirm that the device is suitable for connecting with this projector and prepare 
the required accessories, such as a cable in accord with the signal of the device. 
Consult your dealer when the required accessory did not come with the product or 
the accessory is damaged.
After  making  sure  that  the  device  and  projector  are  turned  off,  connect  them 
following the instructions below.
►Use only the appropriate accessories. Otherwise it could cause 
a fire or damage to the device and the projector. 
-   Use  only  the  accessories  specified  or  recommended  by  the  projector’s 
manufacturer.  Consult  your  dealer  when  the  required  accessory  did  not  come 
with the product or the accessory is damaged. It may be regulated under some 
standard.
-   For a cable with a core at only one end, connect the end with the core to the 
projector. That may be required by EMI regulations. 
- Neither disassemble nor modify the projector and the accessories.
- Do not use the damaged accessory. Be careful not to damage the accessories. Route a cable so that it is neither stepped on nor pinched out.WARNING
►Do not turn on or off the projector while connected to a device 
in operation, unless that is directed in the manual of the device. Otherwise it may 
cause malfunction in the device or projector.
►Be careful not to mistakenly connect a connector to a wrong port. Otherwise it 
may cause malfunction in the device or projector. 
-   When connecting a connector to a port, make sure that the shape of the  
connector fits the port.
-   Tighten the screws to connect a connector equipped with screws to a port.
-   Use the cables with straight plugs, not L-shaped ones, as the input ports of the 
projector are recessed. CAUTION
Connecting with your devices
(continued on next page) Arrangement (continued)
• The projector may make a rattling sound when tilted, moved or 
shaken, since a flap to control the air flow inside of the projector has moved. Be 
aware that this is not a failure or malfunction.
• The incoming light to the screen from the projector has a large angle. While 
the white image is on the screen, you may see it with colors, but this is because 
of the type of the screen used or the angles viewed, and it is not a malfunction.
• When the ambient temperature is around 35 to 40°C,  the brightness of lamp 
is reduced automatically. NOTE