Hitachi L37x01a Users Manual

							50
FEATURES (continued)
Channel List (DTT mode)
You can adjust channel setting on channel list from Channel Manager menu.
1. PressMENU
 button on the remote control in DTT mode.
2. Select “Channel Manager” from Main Menu.
3. Channel list shows up with those status marks.
 .... Favourite  channel
 .... Skip  channel
 .... Lock  channel
+
+.....Channel newly added by using “Single Scan”,  “Full 
 Scan”, and “Scan Setting”. (Once selected, it disappears.)
.....Channel deleted from network by using “Single Scan”, “Full
          Scan”, and “Scan Setting”. (Press Red (Del.) to delete it.)
4. You can adjust channel list with the following remote control keys.
Select items of Channel List. 
The picture of selected channel is displayed at upper right screen.
Move to the next/previous page of Channel List if the number of channel is 
more than 11.
OKJump to “Channel Edit”.
◄►Switch between Channel List and setting section at the lower right.
Red (Del.)Delete the selected channel from the list.
If you select [Continue] on the appeared message, the channel will be 
deleted.  The channel is deleted also from Favourite.
Green (Skip)Set “Skip On/Off” of the selected channel.
By selecting “On,” the channel will be canceled the Favourite setting if the 
channel sets as Favourite previously.
Yellow (Sort)Sort the channel position on the Channel List.
1) Press Yellow button whilst selecting the channel which you wish to sort.
2) Select the destination by using
button.
3) Press
OKbutton.
Blue (Service)Switch the category for Channel List.
Each time pressing this button, it switches as follows.
All Service
:Television
:Radio
:*Data
:All Service
* Data is available only for L37X01U model.
Channel Manager                  Wed 30 Jan 2008
Return Select Enter
    Hide
Fine Tuning
Single Scan
Full Scan
Scan Setting
DTT: All Service
United Kingdom    Continental Digital-cast
CN  Name      Status        
      2  BG0100101   
      3  ATV-Ch03   
    10  Channel-1
    20  Super20
    40  News360
    50  Sports-5
    60  BTTT-Ch06   
    81  TVV-Ch03
  300  Trains30
  811  News25
Signal Quality:72
0 100
Del. Skip Sort Service
OFFON
+
+
 
						

							51
ENGLISH
FEATURES (continued)
Channel List (DTT mode) (continued)
5. You can use the detailed setting by using setting section shown on the lower right. 
HideOff
You can hide/show the channel which sets as “Skip On” by 
pressing
OKbutton whilst selecting “Hide”.
Off:  Display all channels on the Channel List & EPG 
regardless of “Skip On/Off”. The indicator located on the 
left of the icon 
 will be black.
On: If set as “Skip On,” the channel is not displayed on 
Channel List & EPG. The indicator located on the left of 
the icon 
 will be green. On
Single ScanSearch Digital channels manually.
Input the channel number by numeric key on the remote 
control. Then, select [Scan] and press 
OK button to start 
scanning.
If a new channel is found, it will be added to the Channel 
List.
Full ScanSearch Digital channels automatically. (auto search)
Select [Continue] & press
OK button to start scanning all 
Digital channels. 
Once Full Scan is applied, the setting for channel list, 
Favourite Channel, View Timer, and Channel Lock will be 
restored to the original setting.
Scan Setting 
(L37X01E model 
only)In StandbyOff
If set On, this operates Full Scan whilst TV is in Standby/Off. 
(The default setting is On.)
On
In OperateOffIf set On, this operates Full Scan whilst TV is On. It 
automatically starts scanning at set time. (The default setting 
is Off.) On
TimeSelect the start time for Auto Scan. (The default time is 
02:30.)
By using
◄► button, select a position to input, and input a 
desired time by using 
button.
IntervalDaily
Select the preferred interval. (The default setting is Daily.)
Weekly
6. Press 
 button (several times if necessary) on the remote control to return to Normal screen.
• Press
 button on the remote control to switch to TV Channel Manager screen.
• Press
OKbutton to move to Channel Edit page. See33 for the details.
 
						

							52EPG screen displays a list of the stored channels along with information on what programmes are being broadcast, 
if the service is available.
1. Press 
 button todisplay EPG screen.
2. EPG screen is displayed.
  Select a type of EPG display from either Matrix View or Channel 
View by pressing
FUNCTIONbutton and selecting “Matrix View/Channel 
View” (if necessary). See
46.
3. Select programmes using the following buttons.
ButtonMatrix View
Channel view
◄►Shifts from side to side. Changes channels.
Shifts up and down. Changes programmes.
RED
Time backward per page —
GREEN Time forward per page—
YELLOW Day backward
BLUE Day forward
10 channels backward 
and forward10 programmes 
backward and forward
Exits from EPG.
4. PressOK button to show Programme Information.
  You can scroll the Programme Information screen with  button. 
  If you need the following operation, select the preferred item with
◄► button and then pressOK button.
ViewTo show the programme. (EPG screen ends.) This is 
available whilst the programme is currently on air.
View TimerTo set View Timer screen. See
53,54. This is 
available in the future programmes.
Return
To exit from Programme Information.
5. Press  button again to return to the normal screen.
NOTE
You can adjust view settings and search for programmes during EPG by pressingFUNCTION button. See 46 for the 
details.
The number of days displayed in EPG may be varied depending on the country.
Not all channels broadcast all programme information data. Some channels do not provide programme name and 
details. In that case, only channel names are displayed.
FEATURES (continued)
Electronic Programme Guide (EPG)[DTT mode only]
    Thu 31 Jan   Category: All ChannelsChannel 9:00  9:30 10:00 10:30
  801  DTT-1  Natural Life    Creative Live Morning News+ 802 DTT-ch10 Morning News Morning News+
 Small Town 
  3  DTT-ch03  Breakfast Time               News+
30 min news  Cool 01 G12
  116  DTT-ch06  Cool  00  Cool  01  One hour Morning Show
  208  DTT-ch03  Sunrize Information  A. B Smith  Car Detector
  10  Cinema  Normal T  Morning Movie                Sea
  20  Super20               Reset Morning  Song   Ball              ABCDEF
  30  Trains30  Trafic Information  Headine News  Shopping 00
  40  News360               Headine News  15++  Big Game
  50  Sports-5  15min Info.      Yesterday Game Wide Electronics
Guide  Wed 30 Jan 2008     9:00
Thu 31 Jan     8:00 - 8:30  1003  DTT-ch03  30min NewsReturn Select Enter Function
Page+
P
–
Future ProgrammeToday World News Headline
1        Sports-5
Wed  30 Jan 2008                19:00 - 20:00

Highlights and features on today’s sports 
in the world.
Programme Information         Wed 30 Jan 2008   18:16
Scroll Select EnterView Timer Return
18
[Programme Information]
    Thu 31 Jan  Category: All Channels  802  DTT - ch10                 803        DTT - ch11                      804 DTT - ch12
Date  Start - End  Program Name
Thu  31 Jan  8:00 -   8:30  Sports News
Thu  31 Jan  9:00 -   8:30  News
Thu  31 Jan  10:00 -  10:30  Today Topics
Thu  31 Jan  11:00 -  11:30  Market News
Thu  31 Jan  12:00 -  12:30  Word Lunch Words
Thu  31 Jan  13:00 -  13:30  The House
Thu  31 Jan  14:00 -  14:30  Trafic Information
Thu  31 Jan  15:00 -  15:30  News
Thu  31 Jan  16:00 -  16:30  Movie News
Thu  31 Jan  17:00 -  17:30  Word News
Guide   Wed 30 Jan 2008     8:00
Return Select Channel Enter Function
Page+
P
–
[Matrix View]
[Channel View]

 
						

							53
ENGLISH
Title1. Use 
◄► button to change the position to input.
2. Input the title by using 
 and numeric button on the remote control.
3. Press 
OK button to set up the title.
• Limit: 40 characters
• See
54 for the selectable characters by using numeric button.
• To delete a character, use Red button.
ChannelChange the channel by using 
◄► button. If necessary, switch between TV and DTT with 
button.
Date Set the date by using 
◄► button. (up to 30 days)
Start-End1. Use 
◄► button to change the position to input.
2. Change the time by using 
 button.
3. Press 
OK button to set up the time.
Preference
AudioSet up the preference audio by using 
◄► button.
7. Set the timer by using the following button.
Delete
This is available only for editing the item which previously set timer. Press
OKbutton to delete.
Set
Press
OKbutton to set the timer.
Cancel
Press
OKbutton to cancel the timer.
8. The message as “View Timer will start shortly” appears 20 seconds before the desired programme starts, and the 
channel is switched automatically.
NOTE
The selected channel can be watched or recorded via Scart 1 Output. Refer to16 for the details. Timer Programming is available not only to record multiple programme but also to remind you that the desired 
programme is about to start whilst you are watching another channel.
FEATURES (continued)
Programme Timers
Timer List Date   Start - End  Channel  Programme Name
Thu  31  Jan    8:00 -    8:30          000  Sports News
Thu  31  Jan    9:00 -    9:30            10  News
Thu  31  Jan  10:00 -  10:30          100  Tody 
Thu  31  Jan  11:00 -  11:30              2  Cooking
Thu  31  Jan  12:00 -  12:30            54  Word Lunch 
Thu  31  Jan  13:00 -  13:30            32  The House
Thu  31  Jan  14:00 -  14:30          540  Car Maintenance
Thu  31  Jan  15:00 -  15:30          233  Ace
Thu  31  Jan  16:00 -  16:30          956  Tennis
Tues Day   17:00 -  17:30            12  Word 
Every Day  18:00 -  18:30            15  K
Programme Timers   Wed 30 Jan 2008
!
!
ReturnDel. New History
Page
ON
+
P
–
ON
View Timer   Thu 31 Jan 2008    10:00
SelectCancel
Title   Today World News Headline Just 60 minutes
Channel  820      Euro-B sport 
Date  Thu 31 Jan 2008
Start - End  10:00 - 10:00
Preference Audio  English
0-9Enter
Delete CancelSet
[To set View Timer]
1. Press FUNCTIONbutton to display Function Menu. 
2. By using
 button, select “Timers” from Function Menu, and then 
press
OKbutton.
3. Select “Programme Timers” by using
 button, and then pressOK
button. Timer List appears.
4. Move to the bottom of the list by using
 button until “New” appears. 
5. Then, press
OKbutton on the remote control. 
  It moves to View Timer screen to register the details (channel, date, 
etc).
*You can also move to View Timer screen by pressing Green button 
when Timer List appears.
6. Input the following information.
 
						

							54z Check the status of the selected channel/programme:
Check the following marks on the Timer List, which might refl ect on your setting.
ONThe selected channel has Channel Lock.  See 45 for the details.
ONThe selected channel has Rating Lock. (Only for L37X01E model.) See 45 for the details.
!The selected channel has Channel Lock. 
The channel withwill be executed the timer. (The channel with does not have timer setting.)
z To cancel the timer:
Select the programme on the Timer list by using
 button on the remote control.
Then, press Red button to delete
the selected timer.
z To check timer history:
PressYellow button whilst the Timer List is displayed.
z To check timer execution: 
PressBlue button whilst the Timer List is displayed.
This can switch between executed and unexecuted items.
z To stop the running timer event.
Press
FUNCTIONbutton whilst running timer event.
Select “Stop Timer Event” and press
OKbutton.
NOTE
• You can set a timer up to 33 programmes.
• You can also access to View Timer from EPG. See 
52 for the details.
• Photo Input function and Multipicture function are not available whilst running View Timer.
• The following is the selectable characters for “Title” by using numeric button. See
53for details.
— 1 & . + –
 * / !
abc 2 ABC
def
3DEF
ghi
4GHI
jkl
5JKL
mno
6MNO
pqrs
7PQRS
tuv
8TUV
wxyz
9WXYZ
—
0
FEATURES (continued)
Programme Timers (continued)   
 
						

							55
ENGLISH
You can register your favourite list of channels.
1. Select “Favourite” in Function Menu. Refer to 
44.
2. Change pages using
◄► button and select channels using
button. And then select the following buttons.
Red (Del.) Deletes a registered channel.
Green (Add) Registers a channel.
Blue (Info) Switches on and off the display of 
Programme name and End time. (DTT only)
3. Press OK button to activate the settings.
NOTE
• If you set a favourite channel to “Skip On” in Channel Manager menu, the channel will be deleted from Favourite.
• If a channel is deleted from network by using Channel Manager menu, the icon 
 will appear on the list of 
favourite channels. Refer to
50.
• If a channel is deleted from Channel Manager, the channel is deleted also from Favourite.
Information Banner  [DTT mode only]
Whenever a channel is switched or
button is pressed, the 
information banner is displayed on top.
Whilst information banner is displayed, press
button one more 
time, the description currently being broadcast shows up. 
1. Press
button on the remote control. 
  The input signal status will be displayed.
 (See 
27for the details.)
2. Press
button again whilst the status display is displayed.
  Information Banner is displayed as shown right. It contains 
various information such as programme’s detailed information, or 
audio language.
3. Select press Yellow button to switch to next programme 
information.
4.
SelectReturn or button again to go back to normal 
screen.
 And, select View Timer to set a timer.
 (See 
53,54about the View Timer.)
Icon For Conditions
Visually impairedIf the programme provides audio/
subtitle (DVB) service for the visually 
impaired or the hearing impaired, the 
icons will appear.
Hearing impaired
Dolby® Digital Audio
If the programme provides audio 
service with the Dolby
® Digital Audio 
or Dual Mono Audio, the icon will 
appear. [A]Left side of Dual 
Mono Audio
[B]Right side of Dual 
Mono Audio
[A/B]Both side of Dual 
Mono Audio
FEATURES (continued)
Setting Favourite Mode
Favourite
 1
  803  Music TV
 6 DTT-Ch06
 100  News-Ch10
  801  DTT-Ch01
 200  BG01001010
 12  Sport-Z
 11  Natural TV
Del. Add Info
30min News      8:30
30min News      8:30
Headline News/We   8:45
Golf Match      8:30
Afternoon Movie    10:30
Sports News      8:30
Nature Documenta...
 8:30
Tv
           10Tv
English      Spanish
30min.
01h 59m
17:
45
ABTV
12
10
On Air ProgrammeToday World News Headline
1            Sports-5
Wed 30 Jan 2008                    18:00 - 19:00
 English, French
 English, French

Highlights and features on today’s sports in 
the world.
Programme Information        Wed 30 Jan 2008   18:16
Scroll EnterReturnNext
18
18
Next ProgrammeToday World News Headline 
1            Sports-5
Wed 30 Jan 2008                    18:00 - 19:00

Highlights and features on today’s sports in the 
world.
Programme Information         Wed 30 Jan 2008   18:16
Scroll Select Enter NowView Timer Return
[Favourite]
[Next Programme Information]
 [Current Programme Information]

 
						

							56You can set DVB Subtitle On here, and the available DVB Subtitle 
Language provided in the current programme can be selected.
1. Press 
 button on the remote control during DTT mode.
2. You can select one of the languages by using 
◄► button.
3. If you want to activate/deactivate the DVB subtitle now, set to 
  On/Off by using
 button on the right side of banner.
NOTE
• If no DVB subtitle is provided from the programme, “No Language” appears on the banner.
•
The subtitle language (DVB) which is preferentially selected as changing channel can be set up in Confi guration
menu. See 
35 for the details.
The available Audio Language provided in the current programme can 
be selected.
1. Press I/II button on the remote control during DTT mode.
2. You can select one of the languages by using 
◄► button.
NOTE
• If no audio is provided from the programme, “No Language” appears on the banner.
• The audio language which is preferentially selected as changing channel can be set up in Confi guration menu. 
See
35 for the details.
• Dolby® Digital need to be selected in Digital Output of Audio Menu to enjoy the programme in which Dolby®
Digital Audio is provided. See 43 and 55 for details.
DVB Subtitle and DVB Subtitle Language    [DTT mode only]
FEATURES (continued)
Audio Language    [DTT mode only]
Audio LanguageEnglish
English      Spanish ABTV12
10
SubtitleEnglishOn
English      Spanish ABTV12
10
 
						

							57
ENGLISH
FEATURES (continued)
Analogue/Digital Teletext
This teletext supports the following.
• TV mode:  All models
• DTT  mode:  L37X01E
How to operate the Teletext
The Teletext can be simply displayed by pressing the remote control buttons.
NOTE
Select Teletext language from Confi guration menu shown on35 .
Operation Press
To activate Teletext mode.
To exit from the Teletext mode.
[TVÙText]
To move to the next or previous page.[Page Select]
To jump to the indicated page.
(Time-out is 4 seconds in DTT mode.)~
[Page Select]
To split the screen into two and watch both Teletext information 
and actual broadcast at the same time. 
Press again to watch Teletext on a single screen.
[TextÙTV+Text]
To display Index page.[Index]
To access Teletext Subtitle service (if the channel has the Teletext 
Subtitle service broadcasting).
• In TV mode, press this button directly.
•
In DTT mode, press this button after pressing  button (to 
activate Teletext mode fi rst). Please note that pressing this button 
directly in DTT mode (before activating Teletext mode) leads to 
DVB subtitle.[Subtitle]
To display hidden text.
  ex. The answers of the Quiz or the Game page.
Press again to close the revealed answer.?
[Reveal]
To return to actual broadcast temporarily whilst searching for the 
Teletext page you request.
When the search is done, the designated page # will be displayed 
on the upper left of the screen. 
Press again to return to Teletext page.
X
[Cancel]
To access the link pages which are displayed at the bottom of the page.
(Select the buttons corresponding to the colours of the letters on 
screen.)
[Colour]
To hold the text picture.[Hold]
Information
Each time the
.button is pressed, the screen will be switched from double screen to single screen.
Some Teletext pages do not display Link Pages at the bottom of the screen. Pressbutton to display them.
Some Teletext pages display Sub Pages number at the bottom of the screen (under Link Pages). You can select 
the sub page by pressing
◄► button on the remote control.
12 : 34 : 56
Page Number
Link pages
 Red Green Yellow Blue 
 
						

							58
This teletext is for L37X01U model in DTT mode.
MHEG Digital Teletext can provide various information with text 
on the screen.
• To access/exit from Teletext screen, press
button or Colour
button depending on the programme being broadcast. Please 
follow the instructions on the screen when using Colour button.
• MHEG Digital teletext and subtitle (DVB) cannot be activated at 
the same time.
Subtitle (DVB) should be turned off to activate teletext.
• If you try to activate teletext when subtitle (DVB) is ON, the 
dialogue box appears to ask you to turn subtitles off as shown.
03:01  30 Wed
UK Outlook
Regional 24 Hour Forecast
Regional 5 Day Forecast
World Cities
Press TEXT to exit
Press 0 for full screen TV
HOME SHORTCUTS BACK BBCi MENU B B C 1WeatherB B C Weather 
BBC ONE
Operation Press
This switches the receiver between TV mode and 
TELETEXT mode.
[TV TEXT]
Each of these buttons selects the link page displayed at 
the lower part of the screen.
[Colour]
This selects items on the screen.
[Item Select]
This jumps to the indicated page if the instructions 
appear on the screen.
~
[Page Select]
NOTE
  When you are asked to press SELECT in the menu of digital teletext, pressOKbutton on the remote control.
FEATURES (continued)
MHEG Digital Teletext  [DTT mode only]
)NTERACTIVESERVICESCANNOTBEUSED
WHILESUBTITLESAREON7OULDYOULIKE
TOTURNSUBTITLESOFFNOW#ONFIRM
9ES .O
3ELECT%NTER #ANCEL
 
						

							59
ENGLISH
FEATURES (continued)
Size Switching
DTT/TV/AV signal input
Each time button of the remote control is pressed (or press and then◄►
button), the screen display size is switched in sequence, and the status will be displayed 
at the bottom of the screen.
zWatching Standard Defi nition Pictures (480i, 480p, 576i, 576p)
DTT/TV/AV1/AV2/AV3
AutoFull ZoomC14:9L14:9 ZoomPanoramic 2Panoramic 1
AV4/AV5
Panoramic 24:3 Full ZoomC14:9L14:9 ZoomPanoramic 1
HDMI1/HDMI2/HDMI3
Panoramic 24:3AutoFull ZoomC14:9L14:9 ZoomPanoramic 1
zWatching High Defi nition Pictures
AV4/HDMI1/HDMI2/HDMI3
[1080i/1080p] Full 1
FullFull 2
[720p]
ZOOM button
ZoomC14:9L+20
The image at optimum condition is displayed by selecting display size depending on the current output image as shown below.
Input SignalDisplay
ScreenDisplay
SizeTo display suitable screen as follows.
When Watching Standard Defi nition Pictures:
Auto
Play a image with the suitable format by automatically selecting depending 
on the picture format or programme being broadcast. Default Zoom setting 
in the Confi guration menu will be selected if WSS signal or size switching 
signal is not detected in DTT, TV and AV mode.
4:3Play a 4:3 image on screen faithfully. Blanking occurs on both sides.
(4:3 Signal)
Panoramic 1Play a 4:3 image which enlarges horizontal and vertical size of the middle in 
equal scales, and displays both sides appearing much wider.
Panoramic 2
The vertical size of Panoramic 1 is reduced so that you can see the whole 
image, including any subtitles, that might otherwise not be fully visible on the 
screen.
(Squeeze)
FullPlay a 4:3 image faithfully in the standard vertical size and horizontally 
squeezed.
(Vista)
ZoomPlay a 16:9 image in 4:3 frame (Vista size) faithfully.
*In some case, slight blanking may remain at the top and bottom.
(14:9 Signal)
C14:9LPlay a 14:9 image in 16:9 screen, which is expanded vertically and 
squeezed horizontally. 
14:9 ZoomPlay a 14:9 image in 16:9 screen, which is expanded vertically.