Hitachi Cp-X600 Projector Users Manual
Here you can view all the pages of manual Hitachi Cp-X600 Projector Users Manual. The Hitachi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
3 ItemDescription COMPONENT Using the ▲/▼ buttons switches the function of the COMPONENT (Y, Cb/Pb, Cr/Pr) port. COMPONENT ó SCART RGB When the SCART RGB is selected, the COMPONENT (Y, Cb/Pb, Cr/Pr) and VIDEO ports will function as a SCART RGB port. A SCART adapter or SCART cable is required for a SCART RGB input to the projector. For details, contact your dealer. VIDEO FORMAT Set the video format for the s-video port and video port. () Use th e ◄/► buttons to select the input port. (2)...
Page 32
3 ItemDescription FRAME LOCK Using the ▲/▼ buttons turns the frame lock function on/off. TURN ON ó TURN OFF • This item can be performed only on an RGB signal with a vertical frequency of 50 to 60 Hz. • When the TURN ON is selected, a moving pictures are displayed more smoothly. • This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF. RGB IN Set the RGB input signal type for the RGB port. () Use th e ◄/► buttons to select the RGB port to be...
Page 33
33 INPUT Menu ItemDescription RESOLUTIONThe resolution for the RGB and RGB input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button.The RESOLUTION menu will be displayed. () In the RESOLUTION menu select the resolution you wish to display using the ▲/▼ buttons. Selecting AUTO will set a resolution appropriate to the input signal. (3) Pressing the ► or ENTER button when selecting a STANDARD resolution will...
Page 34
34 SETUP Menu SETUP Menu ItemDescription AUTO KEYSTONE EXECUTE Selecting this item performs the Automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself. This function will be executed only once when selected in the Menu. When the slant of the projector is changed, executes this function again. • The adjustable range of this function will vary among inputs. For some input, this function may not work...
Page 35
35 SETUP Menu SETUP Menu (continued) ItemDescription WHISPER Using the ▲/▼ buttons turns off/on the whisper mode. NORMAL ó WHISPER • When the WHISPER is selected, acoustic noise and screen brightness are reduced. MIRROR Using the ▲/▼ buttons switches the mode for mirror status. NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (50) will be displayed when projector is restarted after the power switch is turned off.
Page 36
36 AUDIO Menu AUDIO Menu ItemDescription VOLUMEUsing the ▲/▼ buttons adjusts the volume. High ó Low SPEAKER Using the ▲/▼ buttons turns the speaker function on/off. TURN ON ó TURN OFF • When the TURN ON is selected the built-in speaker works. AUDIO Allocates the audio ports. (1) Choose a picture input port using the ▲/▼ buttons. RGB ó RGB VIDEO ó S-VIDEO ó COMPONENT () Select the audio port to be interlocked with the input port using the ◄/► buttons. ó ó...
Page 37
37
SCREEN Menu
SCREEN Menu
ItemDescription
LANGUAGE
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.
SUOMI ó POLSKI ó TÜRKÇE
ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO
NORSK ó NEDERLANDS ó PORTUGUÊS ó 日本語
ó ó ó SVENSKA ó
MENU POSITIONUsing the ◄/►/▲/▼ buttons adjusts the menu position.To quit the operation, press the MENU button on the remote control
or keep no operation for about 0 seconds.
BLANK
Using the ▲/▼ buttons switches the mode for the blank...
Page 38
38 SCREEN Menu ItemDescription START UP Using the ▲/▼ buttons switches the mode for the start-up screen.The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF Feature MyScreenScreen can be registered by the MyScreen item (39). ORIGINALScreen preset as the standard screen. TURN OFFPlain black screen. • To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the BLANK screen (37) after several minutes....
Page 39
39 SCREEN Menu ItemDescription MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. . Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start capturing an image from the current screen.Please wait for the target image to be displayed, and press the ENTER button on the remote control when the image is...
Page 40
40 SCREEN Menu ItemDescription MESSAGE Using the ▲/▼ buttons turns on/off the message function. TURN ON ó TURN OFF When the TURN ON is selected, the following message function works.“AUTO IN PROGRESS” while automatically adjusting“NO INPUT IS DETECTED”“SYNC IS OUT OF RANGE”“Searching….” while searching for the input“Detecting….” while an input signal is detectedThe indication of the input signal displayed by changing The indication of the aspect ratio displayed by changingThe indication of the PICTURE...