Hitachi Cp-X600 Projector Users Manual


Projector
CP-X600
User's Manual – Operating Guide
Thank you for purchasing this projector.
WARNING  ►Before using this product, please read the "User's Manual - 
Safety Guide" and related manuals to ensure the proper use of this produ\
ct. 
After reading them, store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are 
described below. 
WARNING This  symbol  indicates  information  that,  if...



About this manual  .  .  .  .  .  .  .  .  .  .1
Content   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .2
Projector features   .  .  .  .  .  .  .  .  .  .3
Preparations   .  .  .  .  .  .  .  .  .  .  .  .  .  .3 Contents of package . . . . . . . . . . . . .3 Fastening the lens cover . . . . . . . . . .3
Part names   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4 Projector . . . . . . . . . . . . . . . . . . . . . .4 Control panel . . . . . . . . . . . . . . . . . . .5 Rear panel . . . . ....

3

Fastening the lens cover
To avoid losing the lens cover, please fasten the lens cover to the projector using 
the included strap.
. Fix the strap to the strap hole of the lens 
cover.
. 
Put one side of the strap into the groove on 
the rivet.
3. 
Push the rivet into the rivet hole.
Projector features / Preparations
Projector features
This projector is used to project various picture signals onto a screen.\
 This 
projector requires only a minimal amount of space for installation and c\
an...

4

Part names
Part names
Projector
() Speakers (x 4) (36).
() Focus ring (
18)(3) Zoom ring (18)
(4)   Lamp cover (
52) The lamp unit is inside.(5) Front cover(6) Lens (56)(7) Lens cover (3)(8) Remote sensors (x 3) (14)
(9) Elevator feet (x ) (
9)
(0) Elevator knobs (x ) (
9)
()   Filter cover (
54) The air filter and intake vent are inside.
() Exhaust vents
(3) Intake vents
(4) Rivet hole (
3)
(5) Handle
(6) Control panel (...

5

Part names
Control panel
() STANDBY/ON button (15)
()   MENU button (
22) It consists of four cursor buttons.(3) INPUT button (16)(4) POWER indicator (15, 58)(5) TEMP indicator (58)(6) LAMP indicator (58)
Rear panel
() Shutdown switch (60)
() Security slot (
9)(3) Security bar (9)(4) AC inlet (12)(5) Power switch (15)
(6) RGB port (
10)
(7) RGB port (
10)(8) CONTROL port (10)(9) VIDEO port (10)
(0) S-VIDEO port (
10)
()   COMPONENT  (Y,...

6

Part names
WARNING  ►Do not look into the beam outlet and 
point the beam at people and pets while pressing the 
LASER button, since the beam is not good for eyes.
CAUTION  ►Note that the laser beam may result 
in hazardous radiation exposure. Use the laser pointer 
only for pointing on the screen.
Remote control
() VIDEO button (17)
() RGB button (
16)
(3) SEARCH button (17)
(4) STANDBY/ON button (15)
(5) ASPECT button (17)
(6) AUTO button (18)
(7) BLANK button (21)
(8) MAGNIFY - ON...

7

Setting up
Setting up
Install the projector according to the environment and manner the projec\
tor will be 
used in.
WARNING  ►Place the projector in a stable horizontal position. If the 
projector falls or is knocked over it could cause injury and/or damage t\
o the 
projector. Using a damaged projector could then result in fire and/or electric 
shock.
•  Do not place the projector on an unstable, slanted or vibrational surfac\
e such 
as a wobbly or inclined stand.
•   Do not place the projector...

8

Arrangement
Refer to the illustrations and tables below to determine screen size and\
 projection distance.
The values shown in the table are calculated for a full size screen: 04×768 (a) Screen size (diagonal)
(b) Projection distance (±0%)
(c) Screen height (±0%)
Setting up
(a) Screen size[inch (m)]
4 : 3 screen6 : 9 screen(b) Projection distance  [m (inch)](c) Screen height[cm (inch)](b) Projection distance  [m (inch)](c) Screen height [cm...

9

Adjusting the projector's elevator
When the place to put the projector is slightly uneven to the left or ri\
ght, use the 
elevator feet to place the projector horizontally. 
Using the feet can also tilt the projector in order to project at 
a suitable angle to the screen, elevating the front side of the 
projector within 8 degrees.
This projector has  elevator feet and  elevator knobs. An elevator foot is 
adjustable while pulling up the elevator knob on the same side as it.
....

0

Setting up
Connecting your devices
Be sure to read the manuals for devices before connecting them to the pr\
ojector. 
Make sure that all the devices are suitable to be connected with this pr\
oduct, and 
prepare the cables required to connect.
Please refer to the following illustrations to connect them.
WARNING  ►Do not disassemble or modify the projector.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION  ►Turn off all devices and unplug their power cords prior to...