Hitachi Cp X2510n Projector Technical Manual

11
Command Control via the Network
When the projector connects network, the projector can be controlled with RS-
232C commands from the computer with web browser. 
For details of RS-232C commands, refer to RS-232C Communication / Network 
command table 
(&17).
Connection
1. Turn off the projector and the computer.
2. Connect the projector's LAN port and the computer's LAN port with a LAN 
cable. Use the cable that fulfi lls the specifi cation shown in fi gure (Use CAT-5 
or greater LAN Cable when...

12
Communicaion Port
The following two ports are assigned for the command control.TCP #23
TCP #9715
Configure the following items form a web browser when command control is used.
Port Settings
Network Control 
Port1 (Port: 23) Port open
Click the [Enable] check box to open [Network 
Control Port1 (Port: 23)] to use TCP #23.
Default setting is “Enable”.
Authentication Click the [Enable] check box for the 
[Authentication]
 setting when authentication 
is required.
Default setting is “Disable”.
Network...

13
Command Control via the Network (continued)
Command control settings
[TCP #23]
1. Command format
Same as RS-232C communication, refer to RS-232C Communicaton command format.
2. Response code / Error code ("h" shows hexadecimal)
Four of the response / error code used for TCP#23 are the same as RS-232C 
Communication (1)~(4). One authentication error reply (5) is added.
(1)    ACK reply : 06h 
Refer to RS-232C communication  (
&9).
(2)   NAK reoly : 15h 
Refer to RS-232C communication  (
&9)....

14
2. Response code / Error code ("h" shows hexadecimal)
The  connection  ID  is  attached  for  the  TCP#23's  response  /  error  codes  are 
used. The connection ID is same as the sending command format.
(1) ACK reply : 06h + ××h                    (××h : connection ID)
(2) NAK reoly : 15h + ××h
(3) Error reply : 1Ch + 0000h + ××h
(4) Data reply : 1Dh + xxxxh + ××h
(5) Authentication error reply : 1Fh + 0400h + ××h
(6)   Projector busy reply: 1Fh + ××××h + ××h  
When the projector is too...

15
This projector is equipped with NETWORK BRIDGE function.
When the projector connects to the computer by LAN communicaton, an external 
device  that  is  connected  with  this  projector  by  RS-232C  communication  can  be 
controlled from the computer as a network terminal.
For details, see the 3.7 Controlling the external device via the projector(using 
the NETWORK BRIDGE function) - Network Guide.
Connection
1. Connect the computer's LAN port and the projector's LAN port with a LAN 
cable....

16
Communication settings 
For communication setting, use the OPTION - SERVICE - COMMUNICATION 
menu. (
&OPTION menu - SERVICE - COMMUNICATION in the User's Manual 
- Operating Guide )
Item Condition
BAUD RATE 4800bps / 9600bps / 19200bps / 38400bps
Data length 8 bit (fixed)
PARITY NONE/ODD/EVEN
Start bit 1 bit (fixed)
Stop bit 1 bit (fixed)
Transmission method HALF-DUPLEX/FULL-DUPLEX
NOTE • For  connecting  the  projector  to  your  devices,  please  read  the 
manual for each devices, and connect...

17
Names Operation Type Header Command Data
CRC Action TypeSetting Code
Power SetTurn off BE  EF0306  00 2A  D3 01  0000  60 00  00
Turn on BE  EF0306  00 BA  D2 01  0000  60 01  00
Get BE  EF0306  00 19  D3 02  0000  60 00  00
[Example return]
  00  00  01  00 02  00 
  [Off]  [On] [Cool down]
Input Source SetCOMPUTER IN1 BE  EF0306  00 FE  D2 01  0000  20 00  00
COMPUTER IN2 BE  EF0306  00 3E  D0 01  0000  20 04  00
COMPONENT BE  EF0306  00 AE  D1 01  0000  20 05  00
S-VIDEO BE  EF0306  00 9E  D3 01...

18
Names Operation Type Header Command Data
CRC Action TypeSetting Code
GAMMA Set1 DEFAULT BE  EF0306  00 07  E9 01  00A1  30 20  00
1 CUSTOM BE  EF0306  00 07  FD 01  00A1  30 10  00
2 DEFAULT BE  EF0306  00 97  E8 01  00A1  30 21  00
2 CUSTOM BE  EF0306  00 97  FC 01  00A1  30 11  00
3 DEFAULT BE  EF0306  00 67  E8 01  00A1  30 22  00
3 CUSTOM BE  EF0306  00 67  FC 01  00A1  30 12  00
4 DEFAULT BE  EF0306  00 F7  E9 01  00A1  30 23  00
4 CUSTOM BE  EF0306  00 F7  FD 01  00A1  30 13  00
5 DEFAULT BE...

19
Names Operation Type Header Command Data
CRC Action TypeSetting Code
User Gamma Point 8 Get
BE  EF0306  00 7C  FF 02  0097  30 00  00
Increment BE  EF0306  00 1A  FF 04  0097  30 00  00
Decrement BE  EF0306  00 CB  FE 05  0097  30 00  00
User Gamma Point 8 ResetExecute
BE  EF0306  00 2C  C3 06  0057  70 00  00
COLOR TEMP Set1 HIGH
BE  EF0306  00 0B  F5 01  00B0  30 03  00
1 CUSTOM BE  EF0306  00 CB  F8 01  00B0  30 13  00
2 MID BE  EF0306  00 9B  F4 01  00B0  30 02  00
2 CUSTOM BE  EF0306  00 5B  F9...

20
Names Operation Type Header Command Data
CRC Action TypeSetting Code
COLOR GetBE  EF0306  00 B5  72 02  0002  22 00  00
Increment BE  EF0306  00 D3  72 04  0002  22 00  00
Decrement BE  EF0306  00 02  7305  0002  22 00  00
COLOR Reset ExecuteBE  EF0306  00 80  D0 06  000A  70 00  00
TINT GetBE  EF0306  00 49  7302  0003  22 00  00
Increment BE  EF0306  00 2F  73 04  0003  22 00  00
Decrement BE  EF0306  00 FE  72 05  0003  22 00  00
TINT Reset ExecuteBE  EF0306  00 7C  D1 06  000B  70 00  00
SHARPNESS...