Hanns G Jc199dp Users Manual

Sharpness : To adjust the clarity of a non-SXGA (1280x1024) signal with 
W or  V button. 
 
 
Setup Menu :  To set up Language Select, Resolution Notice, OSD Position, 
OSD Time Out, and Input Select (Analog). 
 
 
  Language Select :
 To allow users to choose from available languages. 
  Resolution Notice :  Resolution Notice is to remind you set the best quality 
for the image. 
z  Choose “Enable” : Every 30 seconds,  it will show a window “ For best 
picture quality change resolution to 1280 x 1024”...

Supporting Timing Modes   
  VGA  720 x 400 @ 70Hz 
 VGA 640 x 480 @ 60Hz 
 MAC 640 x 480 @ 67Hz 
 VESA 640 x 480 @ 75Hz 
 VESA 800 x 600 @ 56Hz 
 VESA 800 x 600 @ 60Hz 
 VESA 800 x 600 @ 72Hz 
 VESA 800 x 600 @ 75Hz 
 MAC 832 x 624 @ 75Hz 
 VESA 1024 x 768 @ 60Hz 
 VESA 1024 x 768 @ 70Hz 
 VESA 1024 x 768 @ 75Hz 
 VESA 1280 x 1024 @ 60Hz 
 VESA 1280 x 1024 @ 75Hz 
 
7 
Warning : 
Do not set the graphic card in your computer to exceed these maximum 
refresh rates. Doing so may result in permanent damage...

Technical Information 
 
Technical Specification 
 
 
8 
LCD Panel   
19.0” TFT 
 
Power Management Energy Star compliant VESA 
DPMS compatible 
< 2 W 
Displayable Resolution SXGA 1280 x 1024 max. Vertical Frequency 75Hz max. 
Pixel Dimension 0.294 x 0.294 mm 
LCD Display Color 16.2M (6 bits + FRC/ color) 
Tilt 0°~20° 
Active Display Area 376 mm x 301mm   
Temperature Operating: 0°C ~ +40°C 
Storage: -20°C ~ + 60°C 
Compliance UL, TUV/GS, CE, FCC-B, Energy Star,TUV/Ergo, TCO03 
Power Input Voltage...

Care and Maintenance 
 
Care 
z Avoid exposing your monitor directly to sunlight or other heat source. Place your 
monitor away from the sun to reduce glare. 
z  Put your monitor in a well ventilated area.   
z  Do not place any heavy things on top of your monitor. 
z  Make certain your monitor is installed in a clean and moisture-free area. 
z  Keep your monitor away from magnets,  motors, transformers, speakers, and TV 
sets. 
 
Note 
z  Move the LCD out of the package and take  off the plastic bag...

Wrong or abnormal colors 
z  If any colors (red, green, blue) are missing, check the video cable to\
 make sure 
it is securely connected. Loose or br oken pins in the cable connector could 
cause an improper connection.  
z  Connect the monitor to another computer.  
 
10 
According to WEEE regulation , this monitor cant be handled as 
normal trash in Europe when it is out of usage. Please refer to the 
recycle information from our website to handle it.