Hanns G Jc199dp Users Manual

							
Sharpness : To adjust the clarity of a non-SXGA (1280x1024) signal with 
W or  V button. 
 
 
Setup Menu :  To set up Language Select, Resolution Notice, OSD Position, 
OSD Time Out, and Input Select (Analog). 
 
 
  Language Select :
 To allow users to choose from available languages. 
  Resolution Notice :  Resolution Notice is to remind you set the best quality 
for the image. 
z  Choose “Enable” : Every 30 seconds,  it will show a window “ For best 
picture quality change resolution to 1280 x 1024” to remind you set t\
he 
best quality for the image.   
z  Choose “Disable” : It will not show  a window to remind you set the best 
quality for the image if the resolution is lower than 1280 x 1024.  
 
OSD Position :  Press 2 button to select between horizontal and vertical 
OSD Position adjustment. 
Horizontal OSD Position :  To horizontally adjust the OSD position.   
V  : move OSD to the right,  W : move OSD to the left. 
Vertical OSD Position :  To vertically adjust the OSD position.   
V :  move OSD up,  W : move OSD down. 
 
OSD Time Out : To automatically turn off On Screen Display(OSD)after a 
preset period of time. 
 
Input Select :  When press Input Select change Input signal to Analog or 
Digital. 
 
Memory Recall :  To recall factory settings for Video & Audio controls. 
Press button 2 to select the Memory Recall menu option. 
 
Audio Menu :  To adjust the audio functions. 
Vo l u m e  :  To adjust the volume of speaker output. 
Mute  :  To turn the Mute ON/OFF.  
 
6 
 
 
						

							
Supporting Timing Modes   
  VGA  720 x 400 @ 70Hz 
 VGA 640 x 480 @ 60Hz 
 MAC 640 x 480 @ 67Hz 
 VESA 640 x 480 @ 75Hz 
 VESA 800 x 600 @ 56Hz 
 VESA 800 x 600 @ 60Hz 
 VESA 800 x 600 @ 72Hz 
 VESA 800 x 600 @ 75Hz 
 MAC 832 x 624 @ 75Hz 
 VESA 1024 x 768 @ 60Hz 
 VESA 1024 x 768 @ 70Hz 
 VESA 1024 x 768 @ 75Hz 
 VESA 1280 x 1024 @ 60Hz 
 VESA 1280 x 1024 @ 75Hz 
 
7 
Warning : 
Do not set the graphic card in your computer to exceed these maximum 
refresh rates. Doing so may result in permanent damage to your monitor. 
 
						

							
Technical Information 
 
Technical Specification 
 
 
8 
LCD Panel   
19.0” TFT 
 
Power Management Energy Star compliant VESA 
DPMS compatible 
< 2 W 
Displayable Resolution SXGA 1280 x 1024 max. Vertical Frequency 75Hz max. 
Pixel Dimension 0.294 x 0.294 mm 
LCD Display Color 16.2M (6 bits + FRC/ color) 
Tilt 0°~20° 
Active Display Area 376 mm x 301mm   
Temperature Operating: 0°C ~ +40°C 
Storage: -20°C ~ + 60°C 
Compliance UL, TUV/GS, CE, FCC-B, Energy Star,TUV/Ergo, TCO03 
Power Input Voltage  AC100-240 V 
Speaker 1W x 2   
 
						

							
Care and Maintenance 
 
Care 
z Avoid exposing your monitor directly to sunlight or other heat source. Place your 
monitor away from the sun to reduce glare. 
z  Put your monitor in a well ventilated area.   
z  Do not place any heavy things on top of your monitor. 
z  Make certain your monitor is installed in a clean and moisture-free area. 
z  Keep your monitor away from magnets,  motors, transformers, speakers, and TV 
sets. 
 
Note 
z  Move the LCD out of the package and take  off the plastic bag and Polystyrene Foam.  
z  Pull the base from Parallel versus Panel to Vertical.  
z  Adjust the Panel within 0 degree leaning forward and 20 degree leaning 
backward. You must bend harder to exceed 20 degree backward but this range 
is for packing the unit to a small size for storage only.  
 
Safety Tips 
z  If smoke, abnormal noise or odor came out  from your monitor, caution you 
should remove the power cord immediately and call your service center. 
z  Never remove the rear cover of your monitor cabinet. The display unit inside 
contains high-voltage parts and may c ause electric shock to human bodies. 
z  Never try to repair your monitor yoursel f. Always call your service center or a 
qualified technician to fix it.  
 
 
Troubleshooting 
 
No power 
z  Make sure A/C power cord is secure ly connected to the power adapter and the 
power supply is firmly connected to the monitor.  
z  Plug another electrical device into the power  outlet to verify that the outlet is 
supplying proper voltage.  
z  Make sure all signal cables are installed. 
  Power on but no screen image 
z  Make sure the video cable supplied with the monitor is tightly secured t\
o the 
video output port on back of the computer. If not, tightly secure it.  
9 
z 
Adjust brightness. 
 
 
						

							
Wrong or abnormal colors 
z  If any colors (red, green, blue) are missing, check the video cable to\
 make sure 
it is securely connected. Loose or br oken pins in the cable connector could 
cause an improper connection.  
z  Connect the monitor to another computer.  
 
10 
According to WEEE regulation , this monitor cant be handled as 
normal trash in Europe when it is out of usage. Please refer to the 
recycle information from our website to handle it.