Hanns G Jc199dp Users Manual

							
 
 
 
 
 
 
 
 
 
19 inch TFT LCD Monitor 
 
 
 
JC199D 
USER’S MANUAL 
 
						

							
Congratulations!
The display you have just purchased carries the TCO’03 Displays
label. This means that your display is designed, manufactured and
tested according to some of the strictest quality and environmental
requirements in the world. This makes for a high performance
product, designed with the user in focus that also minimizes the
impact on our natural environment . 
Some of the features of the TCO’03 Display requirements:
Ergonomics 
Good visual ergonomics and image quality in or der to improve the working environment for
the user and to reduce sight and strain problems. Important parameters are luminance, contrast,
resolution, reflectance, colour rendition and image stability. 
Energy 
• Energy-saving mode after a certain time - beneficial both for the user and the environment 
• Electrical safety 
Emissions • Electromagnetic fields
• Noise emissions 
Ecology • The product must be prepared for recycling  and the manufacturer must have a certified
environmental management system such as EMAS or ISO 14000
• Restrictions on a. chlorinated and brominated flame retardants and polymers
b. heavy metals such as ca dmium, mercury and lead.  
The requirements included in this label have  been developed by TCO Development in co-
operation with scientists, experts, users as we ll as manufacturers all over the world. Since the
end of the 1980s TCO has been involved in influencing the development of IT equipment in a
more user-friendly direction. Our labelling syst em started with displays in 1992 and is now
requested by users and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
 
						

							
Recycling Information 
 
We, the Hanns.G care very much about our environment protection strategy and firmly 
believe that it helps us have healthier earth via appropriate treatment and recycling of 
industrial technology devices at the end-of-life. 
These devices contain recyclable materials, which can be re-decomposed and re-integrated 
into brand-new marvels. On the contrary, other material can be classified to hazardous and 
poisoned substances. We strongly encourage you to contact the provided information to 
recycle this product. 
 
For more information, please visit 
www.hannsg.com 
 
 
 
						

							
Operation Instructions 
 
Thank you for purchasing this monitor, a high-resolution multi-scan colo\
r 
monitor. 
Please read this guide thoroughly before installation.
 
 
FCC RADIO FREQUENCY INTERFERENCE STATEMENT   
WARNING: (FOR FCC CERTIFIED MODELS)
 
 
This monitor has been tested and found compliant with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limi\
ts 
are designed to provide proper protection against harmful interference t\
o a 
residential installation. This monitor generates, uses, and can radiate \
radio 
frequency energy. Harmful interference to radio communication may be led\
 
as a result if it‘s not properly installed and used. However, there i\
s no 
guarantee that interference will not occur in a particular installation.\
 If this 
monitor does cause serious interference to radio or television reception\
, 
resetting the monitor may determine it. Moreover, users are encouraged t\
o 
correct interference by doing one or more of the following:   
 
z  Reorient or relocate the receiving antenna. 
z  Move the monitor and the receiver further away from each other. 
z  Connect the monitor into an outlet on a circuit different from that to 
which the receiver is connected.  
z  Consult your local dealer or an qualified technician
. 
  
FCC Warning: 
To assure a continued FCC compliance, a user must use a grounded 
power supply cord and the provided shielded video interface cable with 
bonded ferrite cores. Also, any unauthorized changes or modifications to\
 
this monitor would void the user‘s authority to operate this device. \
 
Note:  If necessary, shielded interface cables and AC power cord must be 
used to meet the emission level limits.
 
 
						

							
Content 
 
Safety Precautions........................................................................\
..... 1 
First Se tup ........................................................................\
................. 2 
Quick Insta llation........................................................................\
........ 2 
Front View of  the Product .................................................................. 3 
Rear View of  the Product ................................................................... 3 
Using On Screen Display  (OSD) Functions....................................... 4 
Supporting Timi ng Modes.................................................................. 7 
Technical In formation........................................................................\
. 8 
Care and Maintenance....................................................................... 9 
Troubleshoot ing ........................................................................\
......... 9 
 
						

							
Safety Precautions 
This monitor is manufactured and tested on a ground principle that a use\
r’s 
safety comes first. However, improper use or installation may result danger 
to the monitor as well as to the user. Carefully go over the following 
WARNINGS before installation and keep this guide handy.   
 
WARNINGS: 

						

							
First Setup 
 
Congratulation for purchasing this monitor of high performance!   
This monitor comes with the following accessories : 
z Power cable. 
z  D-Sub cable (15 pin) 
z  DVI cable (24 pin)(Optional) 
z  Audio cable. 
z  User guide.
  
 
Quick Installation 
1.  Connect video cable (D-Sub cable)  
Make sure both monitor and computer are powered OFF. Connect the video 
cable (D-Sub cable) to the computer, then to the monitor.  
2.  Connect DVI cable  Connect the DVI cable from DVI output of  computer to the DVI input of the 
monitor. 
3.  Connect power cord  
Connect the power cord to a properly  grounded AC outlet, then to the monitor. 
4.  Power-ON computer and monitor 
Power-ON the computer, then Power-ON the monitor. 
5.  Windows users:
 Setting the Timing Mode (Resolution and Refresh Rate) 
Example: 1280 x 1024 @ 60 Hz 
Resolution
 Right-click on the Windows desktop > Properties > Settings > 
“Desktop Area”. Set the resolution. 
Refresh Rate
 (vertical frequency) See your graphic card’s user guide for 
instructions. 
Example: 
 Power cable 
2 D-Sub cable 
 
						

							
Front View of the Product 
 
 
➊ ➋ ➌ ➍ ➎ ➏
➊ 
OSD TURN ON/OFF ➍ CONFIRM SELECTION        
➋ SCROLL DOWN/DECREASE ➎ POWER ON/OFF 
➌ SCROLL UP/INCREASE ➏ LED INDICATOR   
 
Rear View of the Product 
➐          ➑         ➒     ➓  
3 
➐ POWER INPUT ➒ DVI INPUT (DVI 24 PIN)      
➑ AUDIO INPUT ➓ VGA INPUT (D-SUB 15 PIN) 
 
						

							
Using On Screen Display (OSD) Functions 
 
Display main menu. 1 
Exit from OSD menu. 
Auto adjust the image when not in main menu. 2 
Confirm the selection. 
Select the desired item when in OSD menu. V  or  W 
When not in OSD menu, it is to  immediately activate Contrast/ 
Brightness. It should be change to Contrast/ Brightness by pressing 
button 
2. 
▼  +  ▲ Recall both of Contrast and Brightness. 
1 + ▼  Power Lock (when not in OSD menu) 
1 + ▲ OSD Lock (when not in OSD menu) 
 
Main Menu 
4 
 
 
						

							
Short Cuts Function from the button(s) 
 Auto Adjust :  To auto adjust Horizontal Position, Vertical Position, Phase 
(Fine Tune) and Clock (H. Size) of the screen. 
 
 
Contrast :  To adjust the foreground white level of screen image. 
  V 
: increase contrast,  W: decrease contrast. 
 
Brightness :  To adjust the luminance of the video. 
  V 
: increase brightness,  W : decrease brightness. 
 
Color Adjust :  To select the color for improving brightness and color 
saturation between cool, normal, warm, and User Color. 
Cool :  Adds blue to screen image for cooler white. 
Normal :  Adds red to screen image for warmer white and richer red. 
Warm :  Adds green to screen image for a darker color.   
User Color :  Individual adjustments for red (R), green (G), blue (B). 
1. Press button 2 to select the desired color. 
2. Press  W or V button to adjust selected color. 
 
Information :  To display the information, regarding the current input signal 
coming from the graphic card in your computer. 
  Note:  See your graphic card user guide for more information about 
changing the resolution and refresh rate. 
 
Image Adjust :  To manually adjust the Horizontal / Vertical position, H. Size, 
Fine Tune and Sharpness. 
 
 
H./V. Position :  To adjust the horizontal and vertical position of the video.  
H. Position : V : move screen to the right,  W : move screen to the left. 
V. Position :  V :  move screen up,  W : move screen down.  
 
H. Size :  To adjust the width of the screen image. 
 
W  : decrease the width of screen image,  V : increase the width of screen 
image. 
  
Fine Tune :  To adjust the delay time of data and clock. 
Press  W or V to adjust to your preference. 
 
5