Hanns G Hg281dj Users Manual

User’s Manual  
CONNECTING TO A A/V DEVICE: 
 
Connect A/V devices via the D-sub and Audio Line in connectors at the back of the monitor. 
1. Connect one end of the D-Sub cable to the back of the monitor and connect the other end to the 
D-sub to YPbPr adapter cable. 
2. Connect the Y (green) connector on the D-sub to YPbPr adapter cable to the Y output connector 
on the A/V device. 
3. Connect the Pb (blue) connector on the D-sub to YPbPr adapter cable to the Pb/Cb output 
connector on the A/V device....

User’s Manual 
 
ADJUSTING THE VIEWING ANGLE 
 
• For optimal viewing it is recommended to look at the full face of the monitor, and then adjust the 
monitor’s angle to your own preference. 
• Hold the stand so you do not topple the monitor when you change the monitor’s angle. 
• You may adjust the monitor for a viewing angle of 0
 to 20
 vertically and 0
 to 30
horizontally. 
 
 
 
 
Figure.4. Monitor Angle 
 
 
NOTES: 
 
• Do not touch the LCD screen when you change the angle. It may cause damage...

User’s Manual  
OPERATING INSTRUCTIONS 
 
GENERAL INSTRUCTIONS  
   
Press the power button to turn the monitor on or off. The other control buttons are located on the 
front panel of the monitor (See Figure 5). By changing these settings, the picture can be adjusted to 
your personal preference. 
 
• The power cord should be connected. 
• Connect the Signal cable from the monitor to the VGA card. 
• Press the power button to turn on the monitor. The power indicator will light up. 
 
 
 
 
Figure.5....

User’s Manual 
 
FRONT PANEL CONTROL 
 
• Power Button: 
Press this button to switch ON/OFF monitor’s power. 
 
• Power Indicator: 
Blue — Power On mode. 
Orange — Power Saving mode. 
 
• MENU / RETURN:  
1. Turn the OSD menu on/off or return to the previous menu. 
2. Exit OSD menu when in volume OSD status. 
 
• Adjust ▲▼:  
1. Adjust Brightness and volume when the OSD is off. 
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is 
activated. 
 
• i Button:  
  1....

User’s Manual  
HOW TO ADJUST A SETTINGS 
BRIGHTNESS/CONTRAST 
BRIGHTNESS 
Adjust the brightness value of the display according to your 
preference. Select˜BRIGHTNESS™option to adjust the 
brightness value. 
CONTRAST 
Adjust the contrast value of the display according to your 
preference. Select˜CONTRAST™option to adjust the contrast 
value. 
X-CONTRAST 
Optimal setting for high contrast images or videos. The dark and 
light areas of the image are automatically detected, and the 
contrast is enhanced to...

User’s Manual 
 
H-POSITION 
Select the ˜H-POSITION™option to shift the screen image to the 
left or right. Enter the option and adjust the level. [For VGA 
only] 
V-POSITION Select the ˜V-POSITION™option to shift the screen image up or 
down. Enter the option and adjust the level. [For VGA only] 
CLOCK  
Select the ˜CLOCK™option to reduce the vertical flicker of 
characters on the screen. Enter the option and adjust the level. 
[For VGA only] 
PHASE  
Select the˜PHASE™option to reduce the horizontal...

User’s Manual  
SYSTEM 
AUDIO INPUT 
While transferring via the HDMI port, it is recommended to set 
AUDIO INPUT to HDMI; if no sound is outputted, it is 
recommended to select AUDIO INPUT as PC, and make sure the 
PC audio output cable is connected to monitor’s LINE IN (or 
AUDIO IN) port. [For HDMI Input only] 
VOLUME  Select the ˜VOLUME™option to change the volume level. Enter 
the option and adjust the level. 
MUTE Select the˜MUTE™option to switch the function On or Off. 
DDC/CI Select the...

User’s Manual 
 
PLUG AND PLAY  
 
Plug & Play DDC2B Feature 
 
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. 
It allows the monitor to inform the host system of its identity and, depending on the level of DDC 
used, communicate additional information about its display capabilities. The DDC2B is a 
bidirectional data channel based on the I²C protocol. The host can request EDID information over the 
DDC2B channel. 
 
THIS MONITOR WILL APPEAR TO BE...

User’s Manual  
TECHNICAL SUPPORT (FAQ) 
Q & A FOR GENERAL PROBLEMS 
PROBLEM & QUESTION POSSIBLE SOLUTION 
Power LED is not on *Check if the Power Switch is in the ON position 
*Power Cord should be connected 
No Plug & Play 
*Check if the PC system is Plug & Play compatible 
*Check if the Video Card is Plug & Play compatible 
*Check if any plug pins on the VGA or HDMI connector are 
bent 
The display is too dark or too 
bright. *Adjust the Contrast and Brightness Controls. 
Picture bounces or a wave...

User’s Manual 
 
No sound is outputted from 
monitor’s built-in speaker 
*Make sure PC audio output cable is connected to screen6ãs 
LINE IN port (or AUDIO IN port). 
*Make sure the sound volume adjustment can be clearly 
identified. 
*Make sure the System > Silence option in the monitor menu is 
on. 
*While transferring via HDMI port but no sound is outputted, it 
is recommended to select AUDIO INPUT as a PC option, and 
make sure PC audio output cable is connected to monitor6ãs 
LINE IN port(or AUDIO...