Hanns G Hg281dj Users Manual

 
 
 
 
HSG1040 
HG281
 

User’s Manual 
 
Before operating the monitor, please read this manual thoroughly. This manual should be retained for 
future reference. 
 
 
FCC Class B Radio Frequency Interference Statement  
 
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio...

User’s Manual  
 
 
Congratulations! 
The product you have just purchased carries the TCO’06 Media 
Displays label. This means that your display is designed and 
manufactured according to some of the strictest performance and 
environmental criteria in the world. The manufacturer of this display 
has selected it to be certified to TCO’06 Media Displays as a sign of 
usability, high performance and reduced impact on the natural 
environment. 
 
Products certified to TCO´06 Media Displays are specifically...

User’s Manual 
 
Recycling Information 
 
We, the Hanns.G care very much about our environment protection strategy and firmly believe that 
it helps us have healthier earth via appropriate treatment and recycling of industrial technology 
devices at the end-of-life. 
These devices contain recyclable materials, which can be re-decomposed and re-integrated into 
brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned 
substances. We strongly encourage you to contact...

User’s Manual  
TABLE OF CONTENTS 
 
SAFETY NOTICE........................................................................\
..............................6 
PRECAUTIONS........................................................................\
.............................6 
SPECIAL NOTES ON LCD MONITORS..........................................................7 
BEFORE OPERATING THE MONITOR...............................................................8...

User’s Manual 
 
SAFETY NOTICE 
 
1. The changes or modifications not expressly approved by the party responsible for compliance 
could void the users authority to operate the equipment. 
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the 
emission limits. 
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized 
modification to this equipment. It is the responsibilities of the user to correct such interference....

User’s Manual  
SPECIAL NOTES ON LCD MONITORS 
 
The following symptoms are normal with LCD monitor and do not indicate a problem. 
 
• Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the 
Power Switch and then turn it on again to make sure the flicker disappears. 
• You may find slightly uneven brightness on the screen depending on the desktop pattern you use. 
• The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or...

User’s Manual 
 
BEFORE OPERATING THE MONITOR 
 
FEATURES 
 
• 28” Wide screen TFT Color LCD Monitor 
• Crisp, Clear Display for Windows 
• Recommended Resolutions: 1920 X 1200@60Hz 
• EPA ENERGY STAR®
• Ergonomic Design 
• Space Saving, Compact Case Design 
 
CHECKING THE CONTENTS OF THE PACKAGE 
   
The product package should include the following items: 
LCD Monitor 
 
 
 
 
 
Cables and User manual 
 
Power Cord VGA Cable Audio Cable 
  
HDMI to DVI-D Cable 
(Optional) 
D-sub to YPbPr Cable...

User’s Manual  
INSTALLATION INSTRUCTIONS 
 
INSTALL  REMOVE 
      
 
Figure.1. Installing and Removing the Base 
 
INSTALLATION: 
 
1. Turn the monitor over and set it upside down. 
2. Align the monitor to the slots on the stand. 
3. Please note that the longer edge of the stand should be facing forward. 
4. Securely mount the monitor onto the stand using the supplied screws and Allen key. 
5. Check the underside of the stand to ensure that the monitor has been firmly installed to the stand 
and that...

User’s Manual 
 
MAKING CONNECTIONS 
 
CONNECTING TO A PC 
 
Turn off your computer before performing the procedure below.  
1. Connect one end of the D-Sub cable to the back of the monitor and connect the other end to the 
computer’s D-Sub port. 
2. Connect one end of the HDMI to DVI-D cable (Dual input mode optional) to the back of the 
monitor and connect the other end to the computer’s DVI-D port.  
3. Connect the audio cable between the monitors audio input and the PCs audio output (green 
port)....