Hanns G Hg281dj Users Manual

							
 
 
 
 
HSG1040 
HG281
 
						

							
User’s Manual 
 
Before operating the monitor, please read this manual thoroughly. This manual should be retained for 
future reference. 
 
 
FCC Class B Radio Frequency Interference Statement  
 
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures: 

						

							
User’s Manual  
 
 
Congratulations! 
The product you have just purchased carries the TCO’06 Media 
Displays label. This means that your display is designed and 
manufactured according to some of the strictest performance and 
environmental criteria in the world. The manufacturer of this display 
has selected it to be certified to TCO’06 Media Displays as a sign of 
usability, high performance and reduced impact on the natural 
environment. 
 
Products certified to TCO´06 Media Displays are specifically designed for high quality reproduction 
of moving images.  Features such as luminance, color rendition and response time are important 
when watching TV or working with media, graphics, web design and other applications that demand 
outstanding moving images. * 
 
Other features of TCO’06 Media Displays : 
 
Ergonomics 
• Good visual ergonomics and image quality in order to reduce vision and strain problems. Criteria 
for luminance, contrast, resolution, reflectance, color rendition and response time. 
 
Energy 
• Energy saving mode – beneficial both for the user and the environment 
• Electrical safety 
 
Emissions 
• Low electromagnetic fields surrounding the display 
 
Ecology 
• Product is designed for recycling. Manufacturer must have a certified environmental 
management system such as EMAS or ISO 14 001 
• Restrictions on 
o Chlorinated and brominated flame retardants and polymers 
o Hazardous heavy metals such as cadmium, mercury, hexavalent chromium and lead. 
 
All TCO labelled products are verified and certified by TCO Development, an independent third 
party labelling organization. For over 20 years, TCO Development has been at the forefront of 
moving the design of IT equipment in a more user-friendly direction. Our criteria are developed in 
collaboration with an international group of researchers, experts, users and manufacturers. Since the 
program’s inception, TCO labelled products have grown in popularity and are now requested by 
users and IT-manufacturers all over the world. 
 
Full specifications and lists of certified products can be found on our homepage –  
www.tcodevelopment.com
* For a display used primarily for conventional work tasks such as word processing, we recommend a display certified to 
our office display series TCO’03 Displays or later version. 
3 
 
						

							
User’s Manual 
 
Recycling Information 
 
We, the Hanns.G care very much about our environment protection strategy and firmly believe that 
it helps us have healthier earth via appropriate treatment and recycling of industrial technology 
devices at the end-of-life. 
These devices contain recyclable materials, which can be re-decomposed and re-integrated into 
brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned 
substances. We strongly encourage you to contact the provided information to recycle this product. 
 
For more information, please visit 
www.hannsg.com 
 
 
4 
 
						

							
User’s Manual  
TABLE OF CONTENTS 
 
SAFETY NOTICE........................................................................\
..............................6 
PRECAUTIONS........................................................................\
.............................6 
SPECIAL NOTES ON LCD MONITORS..........................................................7 
BEFORE OPERATING THE MONITOR...............................................................8 
FEATURES........................................................................\
.....................................8 
CHECKING THE CONTENTS OF THE PACKAGE......................................8 
INSTALLATION INSTRUCTIONS....................................................................9 
POWER........................................................................\
...........................................9 
MAKING CONNECTIONS........................................................................\
........10 
ADJUSTING THE VIEWING ANGLE.............................................................12 
OPERATING INSTRUCTIONS........................................................................\
.....13 
GENERAL INSTRUCTIONS........................................................................\
.....13 
FRONT PANEL CONTROL........................................................................\
......14 
HOW TO ADJUST A SETTINGS......................................................................15 
PLUG AND PLAY........................................................................\
........................18 
TECHNICAL SUPPORT (FAQ)........................................................................\
.....19 
Q & A FOR GENERAL PROBLEMS...............................................................19 
ERROR MESSAGE & POSSIBLE SOLUTIONS...........................................21 
APPENDIX........................................................................\
........................................22 
SPECIFICATIONS........................................................................\
......................22 
 
5 
 
						

							
User’s Manual 
 
SAFETY NOTICE 
 
1. The changes or modifications not expressly approved by the party responsible for compliance 
could void the users authority to operate the equipment. 
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the 
emission limits. 
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized 
modification to this equipment. It is the responsibilities of the user to correct such interference. 
 
WARNING: 
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high 
voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified 
personnel only. 
 
PRECAUTIONS 
• Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, 
swimming pool or in a wet basement. 
• Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a 
person and cause serious damage to the appliance. Use only a cart or stand recommended by the 
manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a 
mounting kit approved by the manufacturer and follow the kit instructions. 
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure 
reliable operation of the monitor and to protect it from overheating, be sure these openings are not 
blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place 
the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or 
cabinet unless proper ventilation is provided. 
• The monitor should be operated only from the type of power source indicated on the label. If you 
are not sure of the type of power supplied to your home, consult your dealer or local power 
company. 
• Unplug the unit during a lighting storm or when it will not be used for long period of time. This 
will protect the monitor from damage due to power surges. 
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock. 
• Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a 
fire or electric shock. Never spill liquids on the monitor. 
• Do not attempt to service the monitor by yourself; opening or removing covers can expose you to 
dangerous voltages and other hazards. Please refer all servicing to qualified service personnel. 
• The wall socket shall be installed near the equipment and shall be easily accessible. 
 
 
 
 
6 
 
						

							
User’s Manual  
SPECIAL NOTES ON LCD MONITORS 
 
The following symptoms are normal with LCD monitor and do not indicate a problem. 
 
• Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the 
Power Switch and then turn it on again to make sure the flicker disappears. 
• You may find slightly uneven brightness on the screen depending on the desktop pattern you use. 
• The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or 
less such as a missing pixel or a pixel lit all of the time. 
• Due to the nature of the LCD screen, an afterimage of the previous screen may remain after 
switching the image, when the same image is displayed for hours. In this case, the screen is 
recovered slowly by changing the image or turning off the Power Switch for hours. 
• If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or 
service center for repair. Do not attempt to repair the monitor yourself. 
 
Lamp Disposal 
 
 
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR 
DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE 
INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. 
FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK TTTTWWW.LAMPRECYCLE.ORG. 
 
 
 
 
7 
 
						

							
User’s Manual 
 
BEFORE OPERATING THE MONITOR 
 
FEATURES 
 
• 28” Wide screen TFT Color LCD Monitor 
• Crisp, Clear Display for Windows 
• Recommended Resolutions: 1920 X 1200@60Hz 
• EPA ENERGY STAR®
• Ergonomic Design 
• Space Saving, Compact Case Design 
 
CHECKING THE CONTENTS OF THE PACKAGE 
   
The product package should include the following items: 
LCD Monitor 
 
 
 
 
 
Cables and User manual 
 
Power Cord VGA Cable Audio Cable 
  
HDMI to DVI-D Cable 
(Optional) 
D-sub to YPbPr Cable 
(Optional) 
3.5mm Mini Jack to R/L Cable 
(Optional) 
 
  
User’s manual Warranty card Screw X 3 & Allen key 
8 
 
						

							
User’s Manual  
INSTALLATION INSTRUCTIONS 
 
INSTALL  REMOVE 
      
 
Figure.1. Installing and Removing the Base 
 
INSTALLATION: 
 
1. Turn the monitor over and set it upside down. 
2. Align the monitor to the slots on the stand. 
3. Please note that the longer edge of the stand should be facing forward. 
4. Securely mount the monitor onto the stand using the supplied screws and Allen key. 
5. Check the underside of the stand to ensure that the monitor has been firmly installed to the stand 
and that the screws do not loosen. 
6. Please keep the Allen (hex) key. 
 
REMOVAL: 
 
1. Turn the monitor over and set it upside down. 
2. Loosen the screws by turn them counterclockwise, using the supplied Allen key. 
3.  Detach the stand from the monitor. 
POWER 
 
POWER SOURCE: 
 
1. Make sure that the power cord is the correct type required in your area. 
2. This LCD monitor has an Internal universal power supply that allows operation with either              
100/120V AC or 220/240V AC voltage areas (No user adjustment is required.) 
3. Connect one end of the AC-power cord to your LCD monitor’s AC-input socket, and the other       
end to the wall-outlet. 
 
9 
 
						

							
User’s Manual 
 
MAKING CONNECTIONS 
 
CONNECTING TO A PC 
 
Turn off your computer before performing the procedure below.  
1. Connect one end of the D-Sub cable to the back of the monitor and connect the other end to the 
computer’s D-Sub port. 
2. Connect one end of the HDMI to DVI-D cable (Dual input mode optional) to the back of the 
monitor and connect the other end to the computer’s DVI-D port.  
3. Connect the audio cable between the monitors audio input and the PCs audio output (green 
port). 
4. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to 
the Wall outlet. 
5. Turn on your monitor and computer. 
 
 
 
 
Figure.2 Connecting to a PC 
 
1. Power AC Input 2. HDMI Input 
3. VGA Input 4. Audio Input 
5. Earphone   
 
 
 
 
 
 
 
 
 
 
10