Handspring Visor Edge Handheld User Guide

Chapter 9 Page 223
3. Tap the Connection type pick list and select one of the following 
connection types:
Note:
If you are not sure, try PPP; if that doesn’t work, ask your 
Internet Service Provider or your System Administrator for 
the correct connection type.
Idle timeout
The Idle timeout setting defines how long your handheld waits before 
dropping the connection with your ISP or dial-in server when you 
switch out of a TCP/IP application.
To set the Idle timeout:
1. Tap the Idle timeout pick list...

Page 224  Setting Preferences for Your Handheld
Defining primary and secondary DNS
The Domain Naming System (DNS) is a mechanism in the Internet for 
translating the names of host computers into IP addresses. When you 
enter a DNS number (or IP address), you are identifying a specific 
server that handles the translation services.
Each IP address has four sections, separated by periods. In the Details 
dialog box, you enter each section separately. Each section of an IP 
address is made up of a number...

Chapter 9 Page 225
To identify dynamic IP addressing:
nTap the IP Address check box to select it.
To enter a permanent IP address:
1. Tap the IP Address check box to deselect it and display a 
permanent IP address field below the check box.
2. Tap the space to the left of the first period then enter the first 
section of the IP address. 
Note:
Each section must be a number from 0 to 255.
3. Tap and enter the remaining sections of the IP address.
4. Tap OK.
Creating a login script
A login script is a...

Page 226  Setting Preferences for Your Handheld
3. Tap the command you want from the Command list. If the 
command requires additional information, a field appears to the 
right of it for you to enter the information. The following 
commands are available:
Wait For
Tells your handheld to wait for specific 
characters from the TCP/IP server before 
executing the next command.
Wait For 
PromptDetects a challenge-response prompt from the 
server and displays a dynamically generated 
challenge value. When...

Chapter 9 Page 227
4. Repeat steps 2 and 3 until the login script is complete.
5. Tap OK.
Deleting a service template
There is only one way to delete a service template: use the Delete 
command from the Service menu.
To delete a service template:
1. Tap the Service pick list.
2. Tap the service template you want to delete.
3. Tap the Menu icon  . 
4. Tap Service, and then tap Delete.
5. Tap OK.
Network preferences menu commands
The Network Preferences screen includes menu commands to make it 
fast and...

Page 228  Setting Preferences for Your Handheld
Options menu
TCP/IP troubleshooting
If you are having a problem establishing a network connection using 
TCP/IP, check this section and try the suggestions listed.
Displaying expanded Service Connection Progress messages
It’s helpful to identify at what point in the login procedure the 
connection fails. An easy way to do this is to display the expanded 
Service Connection Progress messages. Expanded Service Connection 
Progress messages describe the...

Chapter 9 Page 229
Owner preferences
The Owner Preferences screen enables you to record a name, company 
name, phone number, or any other information that you want to 
associate with your handheld.
If you use the Security application to turn off and lock your handheld 
with a password, information that you put in the Owner Preferences 
displays the next time you turn on your handheld. See Chapter 1 for 
more information.
To enter the Owner preferences:
nEnter the text that you want to associate with your...

Page 230  Setting Preferences for Your Handheld
ShortCuts preferences
The ShortCuts Preferences screen enables you to define abbreviations 
for entering text with Graffiti strokes. This section describes how to 
create, edit, and delete a ShortCut. See Chapter 2 for more information 
on the use of ShortCuts. 
Creating a ShortCut
You can create a ShortCut for any words, letters, or numbers. All 
ShortCuts you create appear on the list in the ShortCut Preferences 
screen. All the ShortCuts are available in...

Chapter 9 Page 231
Editing a ShortCut
After you create a ShortCut, you can modify it at any time.
To edit a ShortCut:
1. Tap the ShortCut you want to edit.
2. Tap Edit.
3. Make the changes you want and tap OK.
Deleting a ShortCut
If you no longer need a ShortCut, you can delete it from the list of 
ShortCuts.
To delete a ShortCut:
1. Tap the ShortCut you want to delete.
2. Tap Delete.
3. Tap Yes.ShortCut
    

Page 232  Setting Preferences for Your Handheld