GTE Omni Si Database Technical Practices Manual

TL-130400-1001
DESCRIPTION OF MESSAGESTl!:PECGROUP SLOT AND CIRCUIT SPECIFIED IS
NOT 
VALiDFOR Ti-lISPEC TYPE.
DEFINED ON
DEFINED ON ANFR OR
LRRECORD.
FR.‘-ND CIRCUIT SPECIFIED FOR
MUST BE UNIQUE.
AT-80FRL MUST BEFRLS HAVE BEEN EQUIPPED FOR THIS SYSTEM ON
SPECIFIED
RECORD CODE OF AND MUST THEREFORE BE
SPECIFIED FOR EVERY ATTENDANT ON RECORD
CODE AT.
AT-80INCONSISTENT
FRLS HAVE BEEN SPECIFIED FOR SOME PARTS OF
ENGINEERING
THE SYSTEM AND NOT OTHERS.
OF FRLSENSURE THAT ALL ATTENDANTS, LINES, TRUNK
GROUPS,...

TL-130400-1001
CPG ERROR
MESSAGESTable 21.1CPG Error Messages (Continued)TITLE
DESCRIPTION OF MESSAGES
AU-51DUPLICATE
THE AUTHORIZATION CODE NUMBER MUST BE
AUTHORIZATIOUNIQUE ACROSS ALL AU RECORDS.
N CODE
NUMBER
AU-52CLASS OFTHE DISPLAYABLE CLASS OF SERVICE NUMBER MUST
SERVICE NOTBE DEFINED ON A DC RECORD.
DEFINED
AU-53CLASS OF 
‘mTHE N-DISPLAYABLE CLASS OF SERVICE NUMBER
SERVICE NOTMUST BE DEFINED ON AN NC RECORD.
DEFINED
BD-01SECONDPEC - GROUP - CARD SLOT - CIRCUIT
ELEMENTDASHES MUST BE USED...

-.TL-130400-1001
CPG ERRORMESSAGES
Table 21.1CPG Error Messages (Continued)TITLEDESCRIPTION OF MESSAGES
BD-51FUNCTION OF
PHYSICAL LOCATION
CARD NOTTHE PEC, GROUP, SLOT AND CIRCUIT FUNCTION
ALLOWED FORSPECIFIED IS INVALID FOR THE CARD TYPE DEFINED
.~_CARD TYPE
ON FR (FOR THIS PEC TYPE).
DEFINED ONA BLDU CIRCUIT MUST APPEAR ON AN ATTN CARD.
FORM FR
(PHYLOC)
IF THE CARD TYPE IN THE 
MESsAGE IS “OVER” THAT
.
_INDICATES THAT A CARD IN THE PREVIOUS LOCATION
IS A WIDE CARD AND IT OVERHANGS INTO THIS
PHYSICAL...

TL-130400-1001Table 21.1
CPG Error Messages (Continued)CPG ERROR
MESSAGES
CA-04
CA-05
CA-51CA-52
CA-56
CA-57
CA-57
CA-58
CB-01CB-50TITLE
ONLY ONE
FIELD CAN BE
SPECIFIED
DASHES MUST
BE USED
CONSISTENTLY
IN FIELD
ATTENDANT
NOT FOUND
HUNDREDS
GROUP NOT
FOUND
A REQUIRED
RECORD TYPE
NOT FOUND
PNA
DESTINATION
NUMBER
TOO MANY PNA
PILOT
NUMBERS
ATTENDANT
NOT FOUND
INVALID
RECORD CODE
- DIGITS
INCONSISTENT
7/l O-DIGITCHECKING NOT
SPECIFIED ON
RECORDCODE
OF
D-438DESCRIPTION OF MESSAGES
NIGHT ANSWER POSITIONS 1 AND...

TL-130400-1001Table 21.1
CPG Error Messages (Continued)CPG ERROR
MESSAGESTITLE
DESCRIPTION OF MESSAGES
CB-51DUPLICATE
ENTRYA DUPLICATE CB RECORD HAS BEEN DETECTED.
CD-52 
cCLASS OF
AT LEAST ONE DC OR DD RECORD SHOULD SPECIFY
SERVICE
CODE CALL ACCESS (‘CC’).
REQUIRED
-CF-01INVALID
CHARACTER
PATTERN IN
2ND FIELD
CF-01DASHES MUST
BE USED
CONSISTENTLY
IN FIELD
CF-01SECONDCAMP-ON RECORDER ANNOUNCER PEC NUMBER -ELEMENTPABX TRUNK NUMBER.
CONTAINS
DASHES MUST BE CONSISTENT.
INVALID VALUEIF ONE FIELD IS DASHED...

Table 21.1CPG Error Messages (Continued)
DESCRlPTlON OF MESSAGESBETWEEN DISPLAYABLE AND N-DISPLAYABLE
CLASSES OF SERVICE, SEE APPENDIX 1.
NUMBER NOT
DEFINING A RECORDER ANNOUNCER.
FOUND _THE RECORDER ANNOUNCER INDICATED MUST BE
USED FOR THIS FEATURE ONLY. IN ORDER TO WORK
PROPERLY THIS RECORDER ANNNCER CANNOT
ANNOUNCER ON A 
TlRECORD.
CONSISTENTLY
HED THEN DIGITS 2 AND 3 MUST BE DASHES.
2 IS DASHED THEN DIGIT 3 MUST BE
RY NUMBER
SEFIELDS MUST BE FILLED WITH DASHES
E OTHER FIELD MUST SPECIFY A NON-DASH...

TL-130400-1004C’PG ERROR
MESSAGES
Table 21.1CPG Error Messages (Continued)TITLE
DESCRlPTlON OF MESSAGES
CH-05VALUE OF
SECOND
*ELEMENT TOO
LARGE
-..CH-05ELEMENTS
HAVE
INCOMPATIBLE
VALUES
CH-05SECONDNEW CODE TYPE 
- NEW CODE TYPE IDENTIFIER
ELEMENTTHE CODE TYPE IDENTIFIER SPECIFIED IS
CONTAINS
INAPPROPRIATE FOR THE CODE TYPE.
INVALID VALUESEE THE CODE SYMBOL MODULE FOR VALID VALUES
FOR EACH CODE TYPE.
CH-51CH-52ACCESS CODETHE OLD ACCESS CODE REFERENCED ON THE CH
NOT FOUNDRECORD MUST BE DEFINED ON AN AC...

TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESCERTAIN VALUES IN THE DESTINATION TYPE FIELD
REQUIRE SPECIFIC VALUES OR RANGE OF VALUES IN
THE DESTINATION IDENTIFIER FIELD:
DESTINATIONDESTINATION
IDENTIFIER
1.IF THE DESTINATION TYPE IS ‘LINE’,
THE DESTINATION IDENTIFIER VALUE SPECIFIED
MUST BE A VALID LINE STATION NUMBER DEFINED
ON AN LD RECORD.
2. IF THE DESTINATION TYPE IS ‘ATTN’,
THE DESTINATION IDENTIFIER VALUE SPECIFIED
MUST BE A VALID ATTENDANT CIRCUIT DEFINED
ON AN AT...

TL-130400-1001Table 21.1CPG Error Messages (Continued)
ZPG ERROR
MESSAGESTITLE
DESCRIPTION OF MESSAGES
CP-01INVALIDX.1 21 ADDRESS
CHARACTER
THE X.121 ADDRESS MUST CONSIST OF FROM ONE
STRINGTO FOURTEEN NUMERIC DIGITS FOLLOWED BY
*DASHES.
CP-02ELEMENTSDEVICE TYPE 
- X.121 ADDRESS
HAVEIF THE DEVICE TYPE IS ‘TERM’ OR ‘HOST’, THEN THE
INCOMPATIBLEX.121 ADDRESS MUST CONSIST OF FOURTEEN
_VALUESNUMERIC DIGITS AND NO DASHES.
ASYNCHRONOUS DEVICES MUST SPECIFY A FULL
X.121 ADDRESS (DNIC, SERVER, SUBPORT). IF THE...

TL-130400-1001
CPG ERROR
MESSAGESTable 21.1CPG Error Messages (Continued)TITLE
DESCRlPTlON OF MESSAGES
CP-52
. . .CARD TYPE
DEFINED ON FR
INCOMPATIBLE
.
WITH INCOMING
CARD TYPE
CP-52 
-FUNCTION OF
PHYSICAL LOCATION
CARD NOT 
,_
ALLOWED FORTHE PEC, GROUP, SLOT AND CIRCUIT FUNCTION
SPECIFIED IS INVALID FOR THE CARD TYPE DEFINED
CARD TYPE
DEFINED ONON FR (FOR THIS PEC TYPE).
FORM FRDEVICE TYPE TERM MUST APPEAR ON A VPLO, 
VPLl,VP20 (DATA OR VOICE AND DATA), OR VP21 CARD.
DEVICE TYPE HOST MUST APPEAR ON A...