GTE Omni Si Database Technical Practices Issue 1 Manual

SVR 5210TL-130500-1001
Universal PCBs3.6 This paragraph provides information about the PCBsinstalled in the remaining card slots (slots not used by common
control cards). Slots used by these cards (which support lines,
trunks, or features) are called PCMUSs (Pulse Code Modulation
Universal Slots). PCMUSs are not reserved for a certain type of
card, but can be used by any card needed to support the system
configuration. Each card may occupy one, two, or three card
slots. The number of line, trunk, or...

TL-130500-1001PCMUS GROUP C-I
EXPFAICIES’o’(W
COMMONc- CONTROL __)*GROUP 6 -+--GR$XJP
f- PCMUSGROUPC -FILE 
B
STiRzED
(Y)
Figure 3.9Universal PCB Card Slots
a/a7SW 5210 

TL-130500-1001FB#
Table 3.3Universal Printed Circuit Boards
MNE-
PCMUS CARD FUNCTIONCIRCUITS PER
MONICCARDFB-17276-A
FB-17208-A
FB-17225-A
FB-17236-A
FB-1721 O-AFB-51279-A
FB-17202-BOA
FB-17203-A
FB-‘7201 -A
FB-51267-A
FB-51280-A
FB-17254-A
FB-17250-A
TR-100119-l
FB-17280-A
FB-17251 -AFB-17209-A
FB-17235-A
AIOD
ATT12CIP
DVCIP
PADIC
PCONF
PCOT
PDTMF
PEMT
PFWTA
PILT
PLCCPOPS
PMI
PPTR
PRLT
SIDML
VCIPAutomatic Identification of Outward Dialing
Attendant Interface
Control Interface Processor
Data Voice...

TL-130500-1001AIOD3.6.1 The Automatic identification of Outward Dialing card
FB-17276
provides automatic number identification of the calling station on
outgoing calls.
The system identifies the station number and sends the number
over a dedicated channel to the central office 
AIOD equipment in
the connecting central office. This card will supply four stations
and four trunk numbers encoded in two of five formats (0, 
1, 2, 4,
7) over a choice of four channels, two simplex loop channels and
two E&M...

SVR 5210TL-130500-1001CIP3.6.3 The CIP (Control Interface Processor) card provides the
FB-17225-Asystem interface to an Analog Integrated Featurephone. One
card supports up to eight Analog Integrated Featurephones.
Note: A line interface card circuit must also be used to provide
an analog voice path for an Analog Integrated Featurephone.
CIP to Analog Integrated Featurephone communications is a
digital data link: system to CIP communications is done by
memory mapping, using the MPB85 card. The transfer...

TL-130500-1001
PADIC3.6.5 The Public Address and Dictation card is required for the
FB-17210-Asystem to interface with customer-provided dictation or paging
equipment. This card supports two dictation trunks, one paging
circuit with four outputs, and one input from a music source for
the four paging outputs.
Each dictation access circuit allows station users with the
appropriate class of service to access and control the specific
dictation equipment with either dial pulse or tone signaling
methods....

SVR 5210TL-130500-1001
PCONF3.6.6 The PCM Conference card is required if the systemFE3-51279-Aincludes eight-party conference feature. This card contains a
CODEC for analog-to-digital and digital-to-analog
conversion. Sampling signals from the PCMFS card allow this
card to process PCM inputs representing eight time slot related
end-to-end connections. A summing circuit on the card
combines and amplifies all connected stations in a manner that
allows each party to hear all other parties in the conference...

TL-130500-1001
PEMT
3.6.9 The Two-Wire E&M Trunk card is required fcr the system
FB-17201 -Ato interface with two-wire E&M trunks. This card supports
interfacing to four two-wire E&M trunk circuits. Connection to
the trunk consists of one tip and ring analog path plus an E
signaling and M signaling connection.
The Two-Wire E&M Trunk card is typically used for Tie trunks.
The card provides a two-way operation between systems.
These trunk circuits can also te used as one-way-only
interfaces and operate in...

SVR 5210w37S-61 

TL-130500-1001PLCC3.6.12 The PCM Line Circuit card, which has eight tip and ring
FB-17254-Acircuits, is required for system to interface with any of the
following:
l Attendant Console
l Music-on-Hold
l Agent Instruments
* Station Instrument
l Stand-alone Featurephone
l Integrated Featurephone (analog only)
The card contains a CODEC for 
AD and D/A conversion. Scan
control signals are received from, and request control signals are
transferred to, the CPU via the digital data link. Sampling control...