GTE Omni Si Database Technical Practices Issue 1 Manual

TL-130400-1001LIST OF TABLESTABLE
PAGE
PARA- -
s-31 133.3S-322
34.1S-323
34.2S-324
34.3S-324
34.4S-352
36.1s-353
36.2s-354
36.3S-364
36.4TOPIC
DPFIAMP, APM, SPM Description
Office-Dependent Data Base Listing Table of Contents
Table T2541
T2541 Description
Party 
ldentifer/Circuit Number
ICL Objectives for PABX Circuits (VNL Design)
FCL and VNLP Digital Pad Switching Rules
ICL and FLP Digital Pad Switching Rules
Optional Pads
SW 52108187
S-23 

TL-130400-1001
THIS PAGE IS INTENTIONALLY LEFT BLANK.S-248187SVR 5210 

-TL-130500-1001
GENERAL1.0 This technical practice describes the Fujitsu GTE Business
Systems’ 
OMNI SI Digital PABX (Private Automatic Branch
Exchange) manufactured by Fujitsu GTE Business System’s Inc
SVR (System Version Release) 5210 incorporates packet
switching data into system. This practice describes both voice
and data:
l System hardware components
- general description
- operation overview
- interaction
o Trunks, lines, and system capacities
l Ordering procedures
l Software subroutines
The...

TL-130500-1001
THIS PAGE IS INTENTIONALLY LEFT BLANK.S-26 

TL-130500-1001
EQUIPMENT CABINET2.0 The equipment cabinet (Figure 2.1) contains the following:
l System computer and memory0 Common control equipment
l Digital time-switch network
l Line, trunk, and feature circuits
l Optional CD-100 or PD-200 data switching hardware
The cabinet and internal chassis are constructed of high-grade
steel. Universal cabinet doors can be removed for maintenance
and provide for left- or right-hand door hinge mounting.
Cutouts and louvers provide cooling for the equipment...

TL-130500-1001Equipment Cabinet
Placement
Equipment Cabinet
Cabling
Cabinet
ConfigurationContents of
Lower Files2.1 A detailed description of cabinet placement and
installation within the site can be found in TL-130300-1001.
2.2 Cable is routed through an access hole in the rear of the
cabinet, near the cabinet base. The cable connects to the CDF
(Combined Distribution Frame) at sites using typical central office
methods. TL-130300-1001 provides information for cabinet
and system cabling.
2.3 This...

TL-130500-10010 Equipment files
- Get Started File
- Expansion File
- PMT (Power Monitor Transfer)
file
* Power Supplies
- 1 for Get Started and PMT Files
- 1 for Expansion File (optional)
l Battery Pack (optional)
-available in 2-, 8-, or 
14-hourholdup times; maintains memory
integrity when AC power is lost.
l Ring Generator standard 20 watt
FILE XEXPANSION FILEI
FILE Y
GET STARTED FILEEXPANSION PWR SUP 
,-I(REAR)
r------------IiGETSTARTED
PWR SUP
(REAR)
DISK
DRIVEl Floppy Disk Drive
-8 megabyte...

TL-130500-1001Get Started2.3.2 The Get Started File includes the following:
Filel Equipment that provides common system monitoring and
control
l Digital time-switching network for all lines, trunks, and
features used in the system
l Line, trunk, and feature cards as welt as their interface control
Expansion2.3.3 Figure 2.3 shows the Get Started and Expansion
FileFiles.l The two files provide a total of: 256 lines, 64 trunks, 
l’20 low
speed data ports, 30 high speed data ports, or some
combination...

FILE XEXPANSION FILE
FILE 
Y
GET STARTED FILEGET
STARTEDPWR SUP.
(REAR)
FLOPPY
DISK
DRIVEHARD
DISK
DRIVEEXPANSION PWR SUP
(REAR)r------------
I
BATTERY
TRANSFER
COMMON CONTROLFigure 2.3 
OMNI SI
SW 52108187 

TL-130500-1001S-32Table 2.1 System Trade-Offs
Lines (Cards)Trunks (Cards)I
160 (20)I56 (14)I
136 (17)
60 (15)
128 (16)64 (16) 
*
120 (15)8 (2)
24 (3)
0 (0)
* = software limit
40 (10)
8187SVR 5210