GoPro Studio 2 User Manual

GoPro Studio 2.5 User Manual 
Splitting Clips 
 
After dragging some clips to the Storyboard, you may find yourself in a situation where 
you want to insert a clip in the middle of another clip. To do this, you can use the  SPLIT 
button.  
 
1.  Move the Play -head or the  Storyboard Time Indicator  to the location where you 
would like to insert the new clip.  
2.   Press the  SPLIT button to split the clip in two.  
3.   Drag the new clip between the two split clips.  
TIP: If you position the Play...

GoPro Studio 2.5 User Manual 
Additional Enhancements 
 
You can further enhance the clips on your Storyboard by using the features mentioned in 
the “Using  GoPro  Edit Templates
” section of this user  manual. These include the video 
and audio playback controls, color -correction  and framing controls, and the ability to add 
color and effect presets, titles and audio files. F or the most part, you can refer to the 
specific instructions mentioned previously but there are a couple of things to note in...

GoPro Studio 2.5 User Manual 
Step 3: EXPORT 
 
When you’re done editing your Storyboard  and are happy  with how it looks , you’ll want to 
share it with the world. With GoPro Studio you can export  your completed Storyboard 
(combining all the video clips, titles and audio tracks into a single file) using one of the 
s tandard  export options designed for specific target distribution outlets, or you can create 
your own custom export settings.  You can also export single frames of your video clips or...

GoPro Studio 2.5 User Manual 
 
NOTE: The default frame rate for an export is determined by the frame rate used by the 
majority of the clips on the Storyboard.  Exporting to frame rates above 30 fps is not 
recommended if you wish to retain compatibility with modern electronic devices and 
streaming services. . 
 
If FLUX processing has been applied to any clip on the Storyboard, the EXPORT Window 
will show an option to disable it. Simply uncheck the ‘Enable checkbox to disable Flux on 
the current...

GoPro Studio 2.5 User Manual 
Exporting Still Images 
 
In addition to being able to export your Storyboard, GoPro Studio also lets you export a 
single frame (in JPG format) from a clip or the Storyboard.  This enables you to share 
images from your video clips as though they were still photos. E xporting still images out 
of GoPro Studio is done using the Export Image  W indow, which can be accessed by 
sel ecting  the ‘E xport Still image …’ command in the FILE  menu.  
 
In  the Export Still Image...

GoPro Studio 2.5 User Manual 
 
Updating HERO 2 Camera Firmware  
 
GoPro Studio offers a way for you to update the  product software in your HD HERO2  
camera, Wi -Fi BacPac
TM and W i -Fi Remote.  You can perform these tasks from within  the 
Device Window , which you can access by selecting ‘Device W indow’  from the HELP  
menu or by clicking on ‘Ctrl +D’ on your keyboard.  
 
IMPORTANT NOTE:  This process is only  for updating the HD HERO 2, Wi-Fi BacPac 
and Wi -Fi  Remote.  To update an original...

GoPro Studio 2.5 User Manual 
Registering Your  Wi-Fi BacPac™ 
 
1.  Power ON your HD HERO2 camera and connect your Wi -Fi BacPac (with power 
ON) to the back of your camera.  A lso power ON your Wi -Fi Remote.  
2.   With your Wi -Fi BacPac attached to your HD HERO2 camera, connect your W i -Fi 
BacPac to your computer via USB (make sure to connect thr ough  the USB port 
o n Wi -Fi BacPac, not the USB port on the HD HERO2 camera).  
3.   If another Update Available notice appears, you should click the...

GoPro Studio 2.5 User Manual 
Configuring Your Wi -Fi BacPac™ (optional)  
 
1.  Select your Wi -Fi Ba cPac from the list, and press CONFIGURE .   
2.   Change the n ame and password (password must be at least 8 ASCII characters) . 
3.   Click  OK . 
 
NOTE:  We highly encourage you to change your password, as your Wi -Fi BacPac  is set 
to the factory default password ‘goprohero’.  
 
Troubleshooting Tips  
 
We recommend unplugging any  peripheral devices that may be plugged into your 
computer...

GoPro Studio 2.5 User Manual 
Advanced Features 
 
Working with 3D Video Files  
 
With GoPro Studio, you can convert files recorded using a GoPro 3D HERO System into 
3D GoPro CineForm files (also called Stereo GoPro CineForm files). As with converting 
2D files, there is some preparation required before importing these files into GoPro 
Studio.  
 
About the File Structure  
 
The GoPro 3D HERO System records video files on two separate SD cards —one from 
the camera representing the LEFT eye , and one...

GoPro Studio 2.5 User Manual 
Manually Importing 
 
There may occasionally be times in which you will need to  manually import a pair of 3D 
files. This can be the case if your files have been renamed or moved to folders that are 
not  using the default folder names recorded in- camera. Fortunately, GoPro Studio lets 
you manually import and pair these files using the Manual Import option.   
 
1.   Right -click on a blank area of the Import Bin and select “Manual Import…” from the 
context menu that is...