GoPro Studio 2 User Manual

GoPro Studio 2.5 User Manual 
Previewing Clips in the Player Window  
 
If you recently converted files in the IMPORT Room and pressed the PROCEED TO 
STEP 2  button, you should see your converted GoPro CineForm files in the Media Bin on 
the left -hand side of the work area. If you don’t see any files in the Media Bin, refer to the 
steps below . 
  1.  Click the  ADD MEDIA  button and browse to the location of your converted GoPro 
CineForm files.  
2.   Highlight the files you wish to import and click...

GoPro Studio 2.5 User Manual 
Click on a clip in the Media Bin to select it. That loads it into the Player Window. Now you 
can use the Playback Controls to  playback the clip and view it in the Player Window.   
 
•  Press the  PL AY button in the Playback Controls (or the SPACEBAR on your 
keyboard) to see the clip playback in the Player W indow.  
•   The  Decrease Speed  and  Increase Speed  buttons can be used to play the 
video faster or slower.  
•   Use the  Step Forward  and  Step Backwards...

GoPro Studio 2.5 User Manual 
Replacing Target Areas With  Your  Video Clips  
 
With your video clips loaded in the Media Bin, you’re ready to start replacing GoPro  Edit 
Template content on the Storyboard using the following steps:  
  1.  Select the desired clip in the Media Bin.  
2.   Move the Play -head on the Playback Slider to the desired start location of your 
clip and press the  MARK IN button to trim the beginning of the clip. The yellow IN 
Point marker will move to this position on the...

GoPro Studio 2.5 User Manual 
Refining Clips Within  Target Areas  
 
After replacing all the Target Areas with your own clips and playing back the Storyboard, 
you may discover that some of your clips don’t quite fit in the Target Areas where you put 
them.  This is actually to be expected as there is  usually a pretty good chance that the 
edit points in your video clip are not the exact same length as the edit points in the Target 
Area, thus causing your clip to be cut short or last too long ....

GoPro Studio 2.5 User Manual 
SITUATION #2  
 
Now let’s say that the desired action in your clip fits in the Target Area, but there is also 
an extra portion of the clip playing at the end that you did not wish to inclu de. In order to 
fix this, you could use the VIDEO CONTROLS panel to slow down the clip.  
  1.  Select the clip on the Storyboard.  
2.   Click the Disclosure Triangle  to the left of the words “VIDEO CONTROLS” on 
the right -hand side of GoPro Studio’s EDIT Room.  
3.   Using  the...

GoPro Studio 2.5 User Manual 
Adjusting Video Playback Settings  
 
GoPro Studio lets you adjust certain parameters that determine how your video clip will 
playback on the Storyboard. You can change the speed of a clip or have it fade in or out.   
 
To access these controls, select a clip in the Story board and then click the Disclosure 
Triangle  to the left of the words “VIDEO CONTROLS” on the right -hand side of GoPro 
Studio’s EDIT Room. This will open up the VIDEO CONTROLS panel giving you access...

GoPro Studio 2.5 User Manual 
Adjusting Audio Playback Settings  
 
If your video clip contains audio as well, GoPro Studio lets you adjust certain parameters 
that will determine how the audio portion will playback on the Storyboard.  
 
To access these controls, select a clip in the Storyboard and then click the Disclosure 
Triangle  to the left of the words “AUDIO CONTROLS” on the right -hand side of GoPro 
Studio’s EDIT Room. This will open the AUDIO CONTROLS panel giving you access to 
the following...

GoPro Studio 2.5 User Manual 
Color Correcting Clips 
 
The underlying Active MetadataTM architecture used in the GoPro CineForm codec 
enables you to do real -time non- destructive image development adjustments to your 
clips. These adjustments affect the overall color and tone of your clips. The controls to 
apply these adjustments are located i n the WHITE BALANCE and IMAGE CONTROLS 
panels on the right -hand side of GoPro Studio’s EDIT Room.  
 
WHITE BALANCE 
 
Select a clip on the Storyboard and...

GoPro Studio 2.5 User Manual 
IMAGE CONTROLS  
 
S elect a clip on the Storyboard and then click on the Disclosure Triangle  to the left of 
the words “IMAGE CONTROLS” to open the IMAGE CONTROLS panel giving you 
access to the following settings:  
 
•  EXPOSURE  Use the slider or step controls to adjust the brightness and darkness 
of the image.  
•   CONTRAST  Use the slider or step controls to adjust the relative definition 
between bright and dark areas of the image.  
•   S AT UR AT ION  Use the...

GoPro Studio 2.5 User Manual 
Framing Clips 
 
The FRAMING CONTROLS allow you to change the composition of your clips. Select a 
clip on t he Storyboard and then click on the Disclosure Triangle  to the left of the words 
“FRAMING CONTROLS” to open the FRAMING CONTROLS panel giving you access to 
the following settings:  
 
•  ZOOM  When you want to get closer to the subject in your video, use the slider or 
step controls to adjust scale of the image.  
•   HORIZONTAL  Use the slider or step controls to...