GIGABYTE Gh110ma Manual

 &AC BACK Determines the state of the system after the return of power from an AC power loss. Always Off      The system stays off upon the return of the AC power. (Default) Always On   The system is turned on upon the return of the AC power. Memory   The system returns to its last known awake state upon the return of the \
AC power.
 &Power On By Keyboard Allows the system to be turned on by a PS/2 keyboard wake-up event. Note: To use this function, you need an ATX power supply providing...

 &Soft-Off by PWR-BTTN	 Configures	the	way	to	turn	off	the	computer	in	MS-DOS	mode	using	the	power	button. Instant-Off   Press the power button and then the system will be turned off instantly. (Default) Delay 4 Sec.   Press and hold the power button for 4 seconds to turn off the system. If the power button is pressed for less than 4 seconds, the system will enter suspend\
 mode.
 &Power	Loading Enables or disables dummy load. When the power supply is at low load, a \
self-protection will...

2-8	 Save	&	Exit
 &Save	&	Exit	Setup Press  on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press  to return to the BIOS Setup Main Menu.
 &Exit	Without	Saving Press  on this item and select Yes. This exits the BIOS Setup without saving the changes made in BIOS Setup to the CMOS. Select No or press  to return to the BIOS Setup Main Menu.
 &Load Optimized Defaults Press  on this item and select Yes to load the optimal BIOS default settings....

Chapter 3 Appendix
•	Before	installing	 the	drivers,	 first	install	 the	operating	 system.	(The	following	 instructions	 use	Windows 8.1 as the example operating system.)•	After installing the operating system, insert the motherboard driver disk into your optical drive. Click on the message "Tap to choose what happens with this disc" on the top-right corner of the screen and select "Run Run.exe." (Or go to My Computer, double-click the optical drive and execute the Run.exe program.)...

Regulatory	Statements
Regulatory	NoticesThis document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose.Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects at the time of printing. GIGABYTE cannot, however, assume any responsibility for errors or omissions in this text. Also note that the information in this document is subject to change...

FCC	Notice	(U.S.A.	Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmf\
ul interference 
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy a\
nd, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no...

Contact Us
GIGA-BYTE	TECHNOLOGY	CO.,	LTD.Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, TaiwanTEL: +886-2-8912- 4000, FA X: +886-2-8912- 4005Tech. and Non-Tech. Support (Sales/Marketing) : http://esupport.gigabyte.comWEB address (English): http://www.gigabyte.comWEB address (Chinese): http://www.gigabyte.tw
 •GIGABYTE	eSupport
To submit a technical or non-technical (Sales/Marketing) question, plea\
se link to: http://esupport.gigabyte.com
- 37 -