GIGABYTE Gh110ma Manual

							 &AC BACK Determines the state of the system after the return of power from an AC power loss. Always Off      The system stays off upon the return of the AC power. (Default) Always On   The system is turned on upon the return of the AC power. Memory   The system returns to its last known awake state upon the return of the \
AC power.
 &Power On By Keyboard Allows the system to be turned on by a PS/2 keyboard wake-up event. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead. Disabled    Disables this function. (Default) Any Key   Press any key to turn on the system. Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system. Password   Set a password with 1~5 characters to turn on the system.
 &Power On Password Set the password when Power On By Keyboard is set to Password. Press  on this item and set a password with up to 5 characters and then press  to accept. To turn on the system, enter the password and press . Note: To cancel the password, press  on this item. When prompted for the password, press  again without entering the password to clear the password settings.
 &Power On By Mouse Allows the system to be turned on by a PS/2 mouse wake-up event. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead. Disabled    Disables this function. (Default) Move     Move the mouse to turn on the system. Double Click Double click on left button on the mouse to turn on the system.
 &ErP Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled) Note: When this item is set to Enabled, the following functions will become unavailable: Resume by Alarm, PME event wake up, power on by mouse, power on by keyboard, and wake on \
LAN.
2-7	 Power	Management
- 31 -  
						

							 &Soft-Off by PWR-BTTN	 Configures	the	way	to	turn	off	the	computer	in	MS-DOS	mode	using	the	power	button. Instant-Off   Press the power button and then the system will be turned off instantly. (Default) Delay 4 Sec.   Press and hold the power button for 4 seconds to turn off the system. If the power button is pressed for less than 4 seconds, the system will enter suspend\
 mode.
 &Power	Loading Enables or disables dummy load. When the power supply is at low load, a \
self-protection will activate causing it to shutdown or fail. If this occurs, please set to Enabled. Auto	lets	 the	BIOS	 automatically	 configure	this	setting. (Default: Auto)
 &Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Wake	up	day:	 Turn	on	the	system	at	a	specific	time	on	each	day	or	on	a	specific	day	in	a	month. Wake up hour/minute/second: Set the time at which the system will be powe\
red on automatically. Note: When using this function, avoid inadequate shutdown from the operating system or removal of the AC power, or the settings may not be effective.
 &RC6(Render Standby) Allows you to determine whether to let the onboard graphics enter standby mode to decrease power consumption. (Default: Enabled)
 &Platform	Power	Management Enables or disables the Active State Power Management function (ASPM). (Default: Disabled)
 &PEG	 ASPM	 Allows	 you	to	configure	 the	ASPM	 mode	for	the	 device	 connected	 to	the	 CPU	 PEG	 bus.	This	 item	is	configurable	only	when	Platform	Power	Management	is set to Enabled. (Default: Enabled)
 &PCH ASPM	 Allows	 you	to	configure	 the	ASPM	 mode	for	the	 device	 connected	 to	Chipset's	 PCI	Express	 bus.	This	 item	is	configurable	only	when	Platform	Power	Management	is set to Enabled. (Default: Enabled)
 &DMI Link ASPM Control	 Allows	 you	to	configure	 the	ASPM	 mode	for	both	 CPU	 side	and	Chipset	 side	of	the	 DMI	 link.	This	 item	is	configurable	only	when	Platform	Power	Management	is set to Enabled. (Default: Enabled)
- 32 -  
						

							2-8	 Save	&	Exit
 &Save	&	Exit	Setup Press  on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press  to return to the BIOS Setup Main Menu.
 &Exit	Without	Saving Press  on this item and select Yes. This exits the BIOS Setup without saving the changes made in BIOS Setup to the CMOS. Select No or press  to return to the BIOS Setup Main Menu.
 &Load Optimized Defaults Press  on this item and select Yes to load the optimal BIOS default settings. The BIOS defaults settings help the system to operate in optimum state. Always load the Optimized defaults after updating the BIOS or after clearing the CMOS values.
 &Boot Override Allows you to select a device to boot immediately. Press  on the device you select and select Yes to	confirm.	 Your	system	will	restart	automatically	and	boot	from	that	device.
 &Save	Profiles	 This	function	allows	you	to	save	 the	current	 BIOS	settings	 to	a	profile.	 You	can	create	 up	to	8	profiles	 and	save	as	Setup	 Profile	 1~	Setup	 Profile	 8.	Press	 	 to	complete.	 Or	you	 can	select	Select File in HDD/FDD/USB	to	save	the	profile	to	your	storage	device.
 &Load	Profiles  If your system becomes unstable and you have loaded the BIOS default set\
tings, you can use this function to	load	 the	BIOS	 settings	 from	a	profile	 created	 before,	without	 the	hassles	 of	reconfiguring	 the	BIOS	settings.	 First	select	 the	profile	 you	wish	 to	load	 and	then	 press	 	 to	complete.	 You	can	select	Select File in HDD/FDD/USB	to	 input	 the	profile	 previously	 created	from	your	storage	 device	or	load	 the	profile	automatically created by the BIOS, such as reverting the BIOS settings to the last settings that worked properly (last known good record).
- 33 -  
						

							Chapter 3 Appendix
•	Before	installing	 the	drivers,	 first	install	 the	operating	 system.	(The	following	 instructions	 use	Windows 8.1 as the example operating system.)•	After installing the operating system, insert the motherboard driver disk into your optical drive. Click on the message "Tap to choose what happens with this disc" on the top-right corner of the screen and select "Run Run.exe." (Or go to My Computer, double-click the optical drive and execute the Run.exe program.)
Drivers Installation
"Xpress Install" will automatically scan your system and then list all of the drivers that are recommended t\
o install. You can click the Xpress Install button and "Xpress Install" will install all of the selected drivers. O\
r click the arrow  icon to individually install the drivers you need.
Please visit GIGABYTE's website for more software information.
Please	visit	GIGABYTE's	website	for	details	on	configuring	the	audio	software.
- 34 -  
						

							Regulatory	Statements
Regulatory	NoticesThis document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose.Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects at the time of printing. GIGABYTE cannot, however, assume any responsibility for errors or omissions in this text. Also note that the information in this document is subject to change without notice and should not be construed as a commitment by GIGABYTE.
Our	Commitment	to	Preserving	the	EnvironmentIn	 addition	 to	high-efficiency	 performance,	all	GIGABYTE	 motherboards	 fulfill	European	 Union	regulations 	for RoHS (Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment) and WEEE (Waste Electrical and Electronic Equipment) environmental directives, as well as most major worldwide safety requirements. To prevent releases of harmful substances into the environment and to maximize the use of our natural resources, GIGABYTE provides the following information on how you can responsibly recycle or reuse most of the materials in your "end of life" product. 
Restriction of Hazardous Substances (RoHS) Directive StatementGIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE and PBB). The parts and components have been carefully selected to meet RoHS requi\
rement. Moreover, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic c\
hemicals.
Waste	Electrical	&	Electronic	Equipment	(WEEE)	Directive	StatementGIGABYTE	 will	fulfill	 the	national	 laws	as	interpreted	 from	the	2002/96/EC	 WEEE	(Waste	 Electrical	 and	Electronic 	Equipment)	 directive.	The	WEEE	 Directive	 specifies	 the	treatment,	 collection,	recycling	and	disposal	 of	electric	and electronic devices and their components. Under the Directive, used equipment must be marked, collected separately, and disposed of properly.
WEEE	Symbol	StatementThe symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve na\
tural resources and ensure that it is recycled in a manner that protects human\
 health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local	 government	 office,	your	household	 waste	disposal	 service	or	where	 you	purchased	 the	product	 for	details	of environmentally safe recycling. ŠWhen your electrical or electronic equipment is no longer useful to you, "take it back" to your \
local or regional waste collection administration for recycling. ŠIf you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort.
Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of\
 or recycling used batteries properly. With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment,	 minimize	the	use	 of	landfills	 for	the	 disposal	 of	"end	 of	life"	 products,	 and	generally	 improve	our	quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly.
- 35 -  
						

							FCC	Notice	(U.S.A.	Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmf\
ul interference 
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy a\
nd, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular\
 installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment 
off and on, the user is encouraged to try to correct the interference by o\
ne or more of the following measures:
 ŠReorient or relocate the receiving antenna.
 ŠIncrease the separation between the equipment and receiver.
 ŠConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 ŠConsult a dealer or experienced TV/radio technician for help.
Canada, Industry Canada (IC) Notices / Canada, avis d'Industry Canada (IC)
 ŠThis Class B digital apparatus complies with Canadian ICES-003 and RSS-2\
10. 
 ŠOperation is subject to the following two conditions: (1) this device may not cause interference, and (2) this 
device must accept any interference, including interference that may cau\
se undesired operation of the device.
 ŠCet appareil numérique de classe B est conforme aux normes canadienne\
s ICES-003 et RSS-210. 
 ŠSon fonctionnement est soumis aux deux conditions suivantes : (1) cet a\
ppareil ne doit pas causer 
d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent 
affecter son fonctionnement.
- 36 -  
						

							Contact Us
GIGA-BYTE	TECHNOLOGY	CO.,	LTD.Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, TaiwanTEL: +886-2-8912- 4000, FA X: +886-2-8912- 4005Tech. and Non-Tech. Support (Sales/Marketing) : http://esupport.gigabyte.comWEB address (English): http://www.gigabyte.comWEB address (Chinese): http://www.gigabyte.tw
 •GIGABYTE	eSupport
To submit a technical or non-technical (Sales/Marketing) question, plea\
se link to: http://esupport.gigabyte.com
- 37 -