GIGABYTE Gh110ma Manual

 &System Memory Multiplier Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD data. (Default: Auto)
 &Memory Frequency (MHz)	 The	 first	memory	 frequency	 value	is	the	 normal	 operating	 frequency	 of	the	 memory	 being	used;	the	second	is the memory frequency that is automatically adjusted according to the \
System Memory Multiplier settings.
 `Advanced	Memory	Settings
 &System Memory Multiplier, Memory Frequency(MHz)  The settings above are synchronous...

 `Advanced	Voltage	Settings
 `Advanced	Power	Settings
 &CPU Vcore Loadline Calibration	 Allows	you	to	configure	 Load-Line	 Calibration	 for	the	 CPU	 Vcore	 voltage.	 Selecting	 a	higher	 level	keeps	the CPU Vcore voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS automatically	configure	this	setting	and	sets	the	voltage	following	Intel's	specifications.	(Default:	 Auto)
 &VAXG Loadline Calibration	 Allows	you	to	configure	 Load-Line	 Calibration	 for	the	 CPU...

 &CPU Fan Speed Control (CPU_FAN Connector) Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Normal       Allows the fan to run at different speeds according to the CPU temperature. You can adjust the fan speed with System Information Viewer based on your system requirements. (Default) Silent      Allows the fan to run at slow speeds. Manual   Allows you to control the fan speed under the Fan	Speed	Percentage item. Full Speed   Allows...

2-3 System Information
This section provides information on your motherboard model and BIOS version. You can also select the default language used by the BIOS and manually set the system time.
 &System	Language Selects the default language used by the BIOS.
 &System Date Sets the system date. The date format is week (read-only), month, date, and year. Use  to switch between	 the	Month,	 Date,	and	Year	 fields	 and	use	the		or		 key	to	set	 the	 desired	value.
 &System Time  Sets the system time. The time...

 &Boot Option Priorities	 Specifies	the	overall	 boot	order	 from	the	available	 devices.	Removable	 storage	devices	 that	support	 GPT	format	 will	be	prefixed	 with	"UEFI:"	 string	on	the	 boot	 device	 list.	To	boot	 from	 an	operating	 system	that	supports	GPT 	partitioning,	select	the	device	prefixed	with	"UEFI:"	string. Or if you want to install an operating system that supports GPT partitioning such as Windows 7 64-bit, select the	optical	drive	that	contains	the	Windows	7	64-bit...

 &SATA Support All Sata Devices    All SATA devices are functional in the operating system and during the POST. (Default) Last Boot HDD Only   Except for the previous boot drive, all SATA devices are disabled before the OS boot process completes.	 This	item	is	configurable	only	when	Fast Boot is set to Enabled or Ultra Fast.
 &VGA Support Allows you to select which type of operating system to boot. Auto        Enables legacy option ROM only. EFI Driver     Enables EFI option ROM....

 &Other PCI Device ROM Priority Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other than the LAN, storage device, and graphics controllers. Disabled      Disables option ROM. Legacy Only   Enables legacy option ROM only. UEFI Only     Enables UEFI option ROM only. (Default)	 This	item	is	configurable	only	when	CSM Support is set to Enabled.
 &Network Stack Disables or enables booting from the network to install a GPT format OS, such as...

2-5 Peripherals
 &Intel	Platform	Trust	Technology	(PTT) Enables or disables Intel® PTT Technology. (Default: Disabled)
 &Initial Display Output	 Specifies	 the	first	 initiation	 of	the	 monitor	 display	from	the	installed	 PCI	Express	 graphics	 card	or	the	 onboard 	graphics. IGFX	 	 	 Sets	the	onboard	graphics	as	the	first	display. PCIe	1	Slot		 Sets	the	graphics	card	on	the	PCIEX16	slot	as	the	first	display.	(Default)
 &OnBoard LAN Controller Enables or disables the onboard LAN function....

 &Security Device Support Enables or disables Trusted Platform Module (TPM). (Default: Enable)
 &Pending	operation To clear TPM related settings, set this item to TPM Clear. (Default: None)
 &TPM 20 InterfaceType Allows you to select the communication interface for the TPM 2.0 device. Set to External	 TPM2.0 if you install	an	Infineon	 TPM	2.0	module	(optional).	(Default:	PTT)
 &Device Select Allows you to select whether to support TPM 1.2 or TPM 2.0 device. Auto lets the BIOS automatically configure...

 &VT-d (Note)
 Enables or disables Intel® Virtualization Technology for Directed I/O. (Default: Disabled)
 &Internal Graphics Enables or disables the onboard graphics function. (Default: Auto)
 &DVMT Pre-Allocated Allows you to set the onboard graphics memory size. Options are: 32M~512M. (Default: 64M)
 &DVMT Total Gfx Mem Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX. (Default: 256M)
 &Audio Controller Enables or disables the onboard audio function....