GIGABYTE Ga8ipe1000 User Manual

							BIOS Setup - 41 -
English2-5 PnP/PCI Configurations
PCI 1/5 IRQ Assignment
Auto Auto assign IRQ to PCI 1/5. (Default value)
3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1/5.
PCI 2 IRQ Assignment
Auto Auto assign IRQ to PCI 2. (Default value)
3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2.
PCI 3 IRQ Assignment
Auto Auto assign IRQ to PCI 3. (Default value)
3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3.
PCI 4 IRQ Assignment
Auto Auto assign IRQ to PCI 4. (Default value)
3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 4.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PnP/PCI Configurations
PCI 1/5 IRQ Assignment[Auto]
PCI 2 IRQ Assignment[Auto]
PCI 3 IRQ Assignment[Auto]
PCI 4 IRQ Assignment[Auto]
KLJI: Move Enter: Select +/-/PU/PD: ValueF10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults
Item Help
Menu Level`
Device(s) using this
INT: 
						

							GA-8IPE1000 Series Motherboard - 42 -
English
2-6 PC Health Status
Current CPU Temperature
Detect CPU temperature automatically.
Current Voltage(V) Vcore / DDR25V / +3.3V / +12V
Detect systems voltage status automatically.
Current CPU/SYSTEM FAN Speed (RPM)
Detect CPU/SYSTEM fan speed status automatically.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PC Health Status
Current CPU Temperature 50oC
Vcore 1.35V
DDR25V 2.39V
+3.3V 3.28V
+12V 12.09V
Current CPU FAN Speed 3308 RPM
Current SYSTEM FAN Speed 0       RPM
KLJI: Move Enter: Select +/-/PU/PD: ValueF10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults
Item Help
Menu Level` 
						

							BIOS Setup - 43 -
English2-7 Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Frequency/Voltage Control
CPU Clock Ratio [15X]
CPU Host Clock Control[Disabled]
x CPU Host Frequency (Mhz) 133
x AGP/PCI/SRC Fixed 66/33/100
Memory Frequency For[Auto]
Memory Frequency (Mhz) 266
AGP/PCI/SRC Frequency (Mhz) 66/33/100
DIMM OverVoltage Control [Normal]
AGP OverVoltage Control [Normal]
CPU OverVoltage Control [Normal]
KLJI: Move Enter: Select +/-/PU/PD: ValueF10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults
Item Help
Menu Level`
Set CPU Ratio if CPU
Ratio is unclocked
CPU Clock Ratio
This setup option will automatically assign by CPU detection.
The option will display Locked and read only if the CPU ratio is not changeable.
CPU Host Clock Control
Disabled Disable CPU host clock control. (Default value)
EnabledEnable CPU host clock control.
CPU Host Frequency(Mhz)
This item will be available when CPU Host Clock Control is set to Enabled.
100Mhz ~ 355Mhz Set CPU Host Clock from 100Mhz to 355Mhz.
If you use a 400Mhz FSB processor, please set CPU Host Frequency to 100Mhz.
If you use a 533Mhz FSB processor, please set CPU Host Frequency to 133Mhz.
If you use an 800Mhz FSB processor, please set CPU Host Frequency to 200Mhz.
AGP/PCI/SRC Fixed
Adjust AGP/PCI/SRC clock asynchronous with CPU.
Memory Frequency For
Wrong frequency may make system cant boot, clear CMOS to overcome wrong frequency issue.
for FSB(Front Side Bus) frequency =400Mhz,
2.66Memory Frequency = Host clock x 2.66.
Auto Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=533Mhz,
2.0 Memory Frequency = Host clock x 2.
2.5 Memory Frequency = Host clock x 2.5.
Auto Set Memory frequency by DRAM SPD data. (Default value)Incorrect using these features may cause your system broken. For power end-user use only. 
						

							GA-8IPE1000 Series Motherboard - 44 -
English
for FSB(Front Side Bus) frequency=800Mhz,
1.33Memory Frequency = Host clock x 1.33.
1.6 Memory Frequency = Host clock x 1.6.
2.0 Memory Frequency = Host clock x 2.
Auto Set Memory frequency by DRAM SPD data. (Default value)
Memory Frequency (Mhz)
The values depend on CPU Host Frequency(Mhz) and Memory Frequency For.
AGP/PCI/SRC Frequency (Mhz)
The values depend on AGP/PCI/SRC Fixed item.
DIMM OverVoltage Control
Normal Set DIMM OverVoltage Control to Normal. (Default value)
+0.1V Set DIMM OverVoltage Control to +0.1V.
+0.2V Set DIMM OverVoltage Control to +0.2V.
AGP OverVoltage Control
Normal Set AGP OverVoltage Control to Normal. (Default value)
+0.1V Set AGP OverVoltage Control to +0.1V.
+0.2V Set AGP OverVoltage Control to +0.2V.
+0.3V Set AGP OverVoltage Control to +0.3V.
CPU OverVoltage Control
Normal Set CPU OverVoltage Control to Normal. (Default value)
+5.0% Set CPU OverVoltage Control to +5.0%.
+7.5% Set CPU OverVoltage Control to +7.5%.
+10.0% Set CPU OverVoltage Control to +10.0%. 
						

							BIOS Setup - 45 -
English2-8 Load Fail-Safe Defaults
Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system
performance.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
`Frequency/Voltage Control
ESC: QuitKLJI: Select Item
F8: Q-Flash F10: Save & Exit Setup
Load Fail-Safe Defaults
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Load Fail-Safe Defaults  (Y/N)? N
2-9 Load Optimized Defaults
Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically
detects.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
`Frequency/Voltage Control
ESC: QuitKLJI: Select Item
F8: Q-Flash F10: Save & Exit Setup
Load Optimized Defaults
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Load Optimized Defaults (Y/N)? N 
						

							GA-8IPE1000 Series Motherboard - 46 -
English
2-10 Set Supervisor/User Password
Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically
detects.
When you select this function, the following message will appear at the center of the screen to assist you in
creating a password.
Type the password, up to eight characters, and press . You will be asked to confirm the password.
Type the password again and press . You may also press  to abort the selection and not enter
a password.
To disable password, just press  when you are prompted to enter password. A message
PASSWORD DISABLED will appear to confirm the password being disabled. Once the password is disabled,
the system will boot and you can enter Setup freely.
The BIOS Setup program allows you to specify two separate passwords:
SUPERVISOR PASSWORD and a USER PASSWORD. When disabled, anyone may access all BIOS Setup
program function. When enabled, the Supervisor password is required for entering the BIOS Setup program
and having full configuration fields, the User password is required to access only basic items.
If you select System at Password Check in Advance BIOS Features Menu, you will be prompted for the
password every time the system is rebooted or any time you try to enter Setup Menu.
If you select Setup at Password Check in Advance BIOS Features Menu, you will be prompted only when
you try to enter Setup.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
`Frequency/Voltage Control
ESC: QuitKLJI: Select Item
F8: Q-Flash F10: Save & Exit Setup
Change/Set/Disable Password
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Enter Password: 
						

							BIOS Setup - 47 -
English2-11 Save & Exit Setup
Type Y will quit the Setup Utility and save the user setup value to RTC CMOS.
Type N will return to Setup Utility.
2-12 Exit Without Saving
Type Y will quit the Setup Utility without saving to RTC CMOS.
Type N will return to Setup Utility.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
`Frequency/Voltage Control
ESC: QuitKLJI: Select Item
F8: Q-Flash F10: Save & Exit Setup
Save & Exit Setup
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Save to CMOS and EXIT (Y/N)? Y
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
`Frequency/Voltage Control
ESC: QuitKLJI: Select Item
F8: Q-Flash F10: Save & Exit Setup
Abandon all Data
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Quit Without Saving (Y/N)? N 
						

							GA-8IPE1000 Series Motherboard - 48 -
English 
						

							Drivers Installation - 49 -
English
Pictures below are shown in Windows XP.
Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver
CD-title will auto start and show the installation guide. If not, please double click the CD-ROM
device icon in My computer, and execute the Setup.exe.
Chapter 3 Drivers Installation
3-1 Install Chipset Drivers
After insert the driver CD, Xpress Install will  scan automatically the system and then list all the drivers that
recommended to install. The Xpress Install uses theClick and Go technology to install the drivers
automatically. Just select the drivers you want then click the GO button. The Xpress Install will execute
the installation for you automatically.
Some device drivers will restart your system automatically. After restarting your system the Xpress
Install will continue to install other drivers.
System will reboot automatically after install the drivers, afterward you can install others application.
For USB2.0 driver support under Windows XP operating system, please use Windows Service
Pack. After install Windows Service Pack, it will show a question mark ? in Universal Serial Bus
controller under Device Manager. Please remove the question mark and restart the system
(System will auto-detect the right USB2.0 driver).
Only for GA-8IPE1000-G.
Only for GA-8IPE1000-L.
(12) 
						

							GA-8IPE1000 Series Motherboard - 50 -
English
3-2 Software Application
This page displays all the tools that Gigabyte developed and some free software, you can choose anyone
you want and press install to install them.
3-3 Software Information
This page lists the contents of software and drivers in this CD-title.