Getnet Router GR-534W User Manual

							 
136 
 
 
This page displays system information, Internet configuration, and local network 
settings. 
5.7.5   Statistic 
Click Administration > Statistics to display the Statistic page.  
						

							 
137 
 
 
This page displays the memory status, the numbers of transmitted and received data 
packets of the WLAN, LAN, and WAN. 
5.7.6   System Log 
Click Administration > Log to display the System Log page.  
						

							 
138 
 
 
On this page, you are allowed to set the log server and view the system log. 
After enabling the remote log server and enter the IP address of the server, click the 
Apply button, and then the log information can be sent to the remote log server. 
 
  
						

							 
139 
6   Troubleshooting 
Why you can not access Web page to configure AP? 
(1)   Open Web browser (i.e. IE) and select Tools > Internet Options…. 
 
 
(2)  Click Delete Cookies… and Delete Files… respectively. 
 
 
Why you can not establish the network connection? 
   Beyond the wireless coverage 
(1)  Place the device near to the client. 
(2)   Try to change the channel setting 
  Authentication problem 
(1)   Use the cable to connect the computer to the device. 
(2)  Check the network security setting. 
(3)   Try to reset the device by pressing the Reset button.  
						

							 
140 
     Can not search the device. 
(1)   Try to reset the router and test the device again. 
(2)   Check the setting of the wireless network card. 
(3)   Check the SSID and the encryption setting. 
Why you can not access the Internet wirelessly via the device? 
(1)   Place the device to the wireless area where user can access the Internet. 
(2)   Check whether the wireless network card can connect to the right station. 
(3)   Check whether the wireless channel accords with the channel that your country 
or zone states. 
(4)  Check the encryption configuration. 
(5)   Check whether your ADSL cable is connected to the correct interfaces. 
(6)   Replace a network cable to connect to the device. 
Why you can not access the Internet? 
(1)   Check whether the LEDs status on the ADSL modem and the wireless device is 
normal. 
(2)   Check whether the WAN indicator is on. If the WAN indicator is off, please check 
whether the cable connected to the WAN interface is loose. 
(3)   When the Link indicator keeps on but does not blink, it indicates that the device 
has accessed the Internet. 
(4)  Reboot your computer. 
(5)   Set the device again. 
(6)   Check whether the WAN LED is on. 
(7)  Check the encryption setting of wireless network. 
(8)   Check whether the PC that connects to the device can acquire the IP address 
via the wireless network or the cable network. 
(9)   Check the LAN settings of your Internet options, and do not use a proxy server 
for your LAN. See the following figure:  
						

							 
141 
  
						

							 
142