Getnet Router GR-534W User Manual
Have a look at the manual Getnet Router GR-534W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 7 Getnet manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
2 CATALOG 1 Overview ............................................................................................................ 1 2 Hardware Description and Hardware Installation ............................................... 2 2.1 Front Panel and LED Status .................................................................. 2 2.2 Rear Panel and Interface Description ................................................... 3 2.3 Hardware Installation ............................................................................. 4 2.3.1 System Requirements ................................................................ 4 2.3.2 Before You Begin ........................................................................ 4 2.3.3 Connecting AP ............................................................................ 4 2.4 Operation Range ................................................................................... 5 2.5 Roaming ................................................................................................ 5 3 Network Configuration and Introduction to Network Connection Modes ........... 7 3.1 TCP/IP Settings ..................................................................................... 7 3.2 Introduction to PPPoE (ADSL) and DHCP (Auto config) ..................... 10 3.3 Connection Introduction for Ethernet User .......................................... 13 3.4 Connection Introduction for Wireless User .......................................... 13 3.5 Log In to the Web Page ....................................................................... 16 4 Quick Start ........................................................................................................ 18 4.1 Quick Start in the Bridge Mode ............................................................ 18 4.2 Quick Start in the Gateway Mode ........................................................ 20 4.2.1 System Management ................................................................ 21 4.2.2 LAN Settings ............................................................................. 21 4.2.3 WAN Settings ........................................................................... 23 4.2.4 Wireless Settings ...................................................................... 23 4.2.5 Wireless Security ...................................................................... 25 4.3 Quick Start in the WISP Mode ............................................................. 25 5 Web Configuration ........................................................................................... 28 5.1 Overview .............................................................................................. 28 5.1.1 Status ........................................................................................ 28 5.1.2 Statistic ..................................................................................... 29 5.1.3 Management ............................................................................. 29 5.2 Operation Mode ................................................................................... 30 5.3 Internet Settings .................................................................................. 31 5.3.1 LAN ........................................................................................... 32 5.3.2 WAN ......................................................................................... 34 5.3.3 Advanced Routing .................................................................... 39
3 5.3.4 DHCP Client ............................................................................. 42 5.3.5 QoS ........................................................................................... 43 5.4 Wireless Settings (Gateway Mode) ..................................................... 50 5.4.1 Basic ......................................................................................... 51 5.4.2 Advanced Settings .................................................................... 58 5.4.3 Security ..................................................................................... 66 5.4.4 WPS .......................................................................................... 75 5.4.5 Station List ................................................................................ 80 5.4.6 Wireless WDS Setting .............................................................. 80 5.5 Wireless Settings (WISP Mode) .......................................................... 90 5.5.1 Profile ........................................................................................ 91 5.5.2 Link Status ................................................................................ 97 5.5.3 Site Survey ............................................................................... 97 5.5.4 Statistics .................................................................................. 100 5.5.5 Advance .................................................................................. 101 5.5.6 QoS ......................................................................................... 104 5.5.7 11n Configurations .................................................................. 106 5.5.8 WPS ........................................................................................ 108 5.5.9 About ...................................................................................... 120 5.6 Firewall .............................................................................................. 121 5.6.1 Filtering ................................................................................... 121 5.6.2 Virtual Server .......................................................................... 124 5.6.3 DMZ ........................................................................................ 127 5.6.4 System Security ...................................................................... 127 5.6.5 Content Filtering ..................................................................... 129 5.7 Administration .................................................................................... 131 5.7.1 Management ........................................................................... 131 5.7.2 Upload Firmware .................................................................... 134 5.7.3 Settings Management ............................................................. 135 5.7.4 Status ...................................................................................... 135 5.7.5 Statistic ................................................................................... 136 5.7.6 System Log ............................................................................. 137 6 Troubleshooting ............................................................................................. 139
4 About User Manual This user manual mainly describes how to install and configure the Getnet GR-534W wireless router. Organization The GR-534W User Manual is organized as follows: Chapter Description Chapter 1 : Overview Provides a general overview of the GETNET GR-534W wireless router, and the package list. Chapter 2 : Hardware Description and Hardware Installation Mainly describes the front panel and the rear panel of the GETNET GR-534W and the procedure for hardware installation. Chapter 3 : Network Configuration and Introduction to Network Connection Modes Describes how to configure the network settings and provides the introduction to network connection modes. Chapter 4 Quick Start Provides quick start for configuring GETNET GR-534W. Chapter 5 Web Configuration Mainly describes how to navigate through the Web pages and how to configure the parameters. Chapter 6 : Troubleshooting Describes how to solve some simple problems. Features Support IEEE802.11b, IEEE802.11g, IEEE802.11n, IEEE802.3, IEEE802.3u, IEEE802.11i, and IEEE802.11e The transmission data rate is up to 150 Mbps Support WEP and WPA for data transmission security Support DHCP Server and Client Support static and dynamic routing
5 Support upgrading firmware version via Web page Support restoring factory default settings Support virtual server Support DMZ (demilitarized zone) Support DNS proxy and forwarding Support setting QoS bandwidth, and generating rules based on protocol, port, IP, DSCP, or application Support wireless security authentication modes, including Open, Shared, WEPAUTO, WPA-Enterprise, WPA-PSK, WPA2-Enterprise, WPA2-PSK, WPA-PSK/WPA2-PSK, WPA/WPA2-Enterprise, and Dynamic WEP 802.1x Support 5 types of WAN connection modes, including STATIC (fixed IP), DHCP (Auto config), PPPoE (ADSL), L2TP, and PPTP Support remote access control Support firewall functions, including IP/MAC/port filter, URL filter, and Web content filter Support system status display Support backuping and restoring configuration file Ethernet provides cross-over cable detection and also provides auto modification and polarity modification function Support system log
1 1 Overview Thank you for choosing GETNET GR-534W. GETNET GR-534W is fully compatible with 802.11g standard. Meanwhile, it is also compatible with 802.11 standards and earlier 802.11b standards. GETNET GR-534W supports CCK and OFDM and its data rate is up to 150 Mbps. It is easy to install and can be applied to AP and router access. GETNET GR-534W provides 64-bit and 128-bit WEP encryption schemes, and WPA encryption, associating with IEEE 802.1X authentication, which insures the security of wireless communication. Package List Please check whether your package list includes the following items: GR-534W x 1 Power adapter x 1 RJ 45 cable x 1
2 2 Hardware Description and Hardware Installation 2.1 Front Panel and LED Status There are 8 LED indicators on the front panel of GR-534W. By observing their status, you can judge whether the device runs normally. The following table describes the LED indicators on the front panel. LED Indicator Color StatusDescription Red On Power is on. Green On The device runs normally. - Off Power is off or the device is down. Green On Radio switch is turned on. Green Blink Data is being transmitted. - Off Radio switch is shut off. WPS Green On Connection succeeds under Wi-Fi Protected Setup.
3 Green Blink Negotiation is in progress under Wi-Fi Protected Setup. - Off Wi-Fi Protected Setup is disabled. WAN Green On Connection succeeds. Green Blink Data is being transmitted. - Off No WAN connection. LAN 1/2/3/4 Green On LAN connection succeeds. Green Blink Data is being transmitted. - Off No LAN connection. 2.2 Rear Panel and Interface Description The following table describes the interfaces or the buttons on the rear panel: Interface/Button Description RESET Press the button for 3 seconds and then release it. System restores the factory default settings. ON/OFF By pressing the button, the power is on. Press the button again, and then the power is off. POWER Power socket, for connecting the power adapter. WAN WAN interface, for connecting WAN or the uplink network devices. LAN1~LAN4 LAN interface, for connecting hub, switch, or computer on LAN. WPS This button is used for enabling WPS PBC mode. If WPS is enabled, press this button, and then AP starts to
4 accept the negotiation of PBC mode. Note: Do not press the Reset button unless you want to clear the current settings. The Reset button is in a small circular hole on the rear panel. If you want to restore the default settings, please press the Reset button gently for 3 seconds with a fine needle inserted into the hole and then release the button. The system reboots and returns to the factory defaults. Warning: The power specification is 12V, 500 mA. If the power adapter does not match the specification, it may damage the device. 2.3 Hardware Installation 2.3.1 System Requirements Before installing the device, please make sure that the following items are ready. At least one Ethernet RJ45 cable (10Base-T/100Base-T) GR-534W x 1 A PC has been installed PCP/IP protocol and it can access the Internet. 2.3.2 Before You Begin Before you install the device, please pay attention to the following items: When connecting the device to the computer, hub, router or switch, the Ethernet cable should be less than 100 meters. Do not place this device on an unstable surface or support. Do not put this device on the ground. Keep the device clean. Avoid the device from direct sunshine. Avoid any metal in the device. Place the device in the center of the area, and try to optimize the wireless coverage. 2.3.3 Connecting AP Step 1 Connect one end of the RJ45 cable to the LAN interface of the GR-534W. Step 2 Connect the other end of the RJ45 cable to your PC. Step 3 Connect the power adapter to the power socket of the GR-534W.
5 2.4 Operation Range The operation range of GR-534W depends on the actual environment. When the device is placed in the house or in the office, the overall arrangements are different. So the path and effect for the signal transmission are different. For example, the outdoor straight transmission distance for some devices in the open air is up to 300 meters, and the indoor straight transmission distance is up to 100 meters. 2.5 Roaming Suppose that several GR-534Ws run in the same network. Each GR-534W acts as one BSS, and has its coverage. One wireless client terminal (e.g. notebook PC or PDA) can realize roaming from one AP to another AP correctly. In that case, the wireless client terminal can communicate with the other devices within the GR-534Ws’ coverage. In order to realize the wireless client roaming among different GR-534Ws, you need to set the GR-534W properly. Do as follows: Set the same SSID for different GR-534Ws. The SSIDs of all the computers and PDAs should be consistent with that of the GR-534Ws. All the BSSs must use the same wireless channel. If the encryption function is enabled, all the GR-534Ws should configure the same encryption mode and the encryption key for establishing connection. GR-534W must keep the wireless signal covering the whole operation environment and the wireless signal should be continuous. Please put the GR-534Ws to the appropriate places for a better network coverage.