GE Pqm 2 Manual

Digital Energy
PQMII Power Quality Meter
Instruction Manual
Software Revision: 2.2x
Manual P/N: 1601-0118-AE
Manual Order Code: GEK-106435N
Copyright © 2011 GE Digital Energy
GE Digital Energy
215 Anderson Avenue, Markham, Ontario
Canada L6E 1B3
Tel: (905) 294-6222   Fax: (905) 201-2098
Internet: 
http://www.gedigitalenergy.com
GE Digital Energys Quality 
Management System is registered to 
ISO9001:2000
QMI # 005094
UL # A3775
*1601-0118-AE* 

© 2010 GE Digital Energy Incorporated. All rights reserved.
GE Digital Energy PQMII Power Quality Meter instruction manual for revision 2.2x.
PQMII Power Quality Meter, is a registered trademark of GE Digital Energy Inc.
The contents of this manual are the property of GE Digital Energy Inc. This documentation 
is furnished on license and may not be reproduced in whole or in part without the 
permission of GE Digital Energy. The content of this manual is for informational use only 
and is subject to...

TABLE OF CONTENTS
PQMII POWER QUALITY METER  – INSTRUCTION MANUALTOC–I
Table of Contents
1: OVERVIEWINTRODUCTION TO THE PQMII ................................................................................................... 1-1
D
ESCRIPTION ........................................................................................................................ 1-1
F
EATURE HIGHLIGHTS ......................................................................................................... 1-2
A...

TOC–IIPQMII POWER QUALITY METER  – INSTRUCTION MANUAL
TABLE OF CONTENTS
RS485 SERIAL PORTS ........................................................................................................ 2-17
RS232 F
RONT PANEL PORT ............................................................................................. 2-19
D
IELECTRIC STRENGTH TESTING ........................................................................................ 2-19
3: OPERATIONFRONT PANEL AND DISPLAY...

TABLE OF CONTENTS
PQMII POWER QUALITY METER  – INSTRUCTION MANUALTOC–III
5: SETPOINTSINTRODUCTION ................................................................................................................................ 5-1
S
ETPOINT ENTRY METHODS ............................................................................................... 5-1
S
ETPOINTS MAIN MENU ..................................................................................................... 5-2
S1 PQMII SETUP...

TOC–IVPQMII POWER QUALITY METER  – INSTRUCTION MANUAL
TABLE OF CONTENTS
VOLTAGE METERING ........................................................................................................... 6-6
P
HASORS ..............................................................................................................................6-8
P
OWER METERING .............................................................................................................. 6-8
E
NERGY METERING...

TABLE OF CONTENTS
PQMII POWER QUALITY METER  – INSTRUCTION MANUALTOC–V
8: WARRANTYGE MULTILIN DEVICE WARRANTY  ............................................................................................ 8-1
W
ARRANTY STATEMENT ..................................................................................................... 8-1
APPENDIXMOD 506: CAPACITOR BANK SWITCHING  ............................................................................ A-1
D
ESCRIPTION...

TOC–VIPQMII POWER QUALITY METER  – INSTRUCTION MANUAL
TABLE OF CONTENTS 

PQMII POWER QUALITY METER  – INSTRUCTION MANUAL1–1
PQMII Power Quality Meter
Chapter 1: Overview
Digital Energy
Ov er vie w
1.1 Introduction to the PQMII
1.1.1 Description
The GE Multilin PQMII Power Quality Meter is an ideal choice for continuous monitoring of a 
single or three-phase system. It provides metering for current , voltage, real power, reactive 
power, apparent power, energy use, cost of power, power factor, and frequency. 
Programmable setpoints and four assignable output relays allow...

1–2PQMII POWER QUALITY METER  – INSTRUCTION MANUAL
CHAPTER 1: OVERVIEW
1.1.2 Feature Highlights
• Monitoring: A, V, VA, W, var, kWh, kvarh, kVAh, PF, Hz
• Demand metering: W, var, A, VA
• Setpoints for alarm or control from most measured values, including: unbalance, 
frequency, power factor, voltage, and current
• four (4) output relays / four (4) switch inputs for flexible control conf iguration
• four (4) isolated analog outputs replace transducers for PLC interface
• one 4 to 20 mA analog input
•...