GE Cpv10mp8 Manual

2018/02  – Subject to change21 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Pneumatic components
Pneumatic connection
The working lines are located directly
in the valve slices. Threaded
connectors and Quick Star push-in
fittings (QS) are available for different
tubing sizes. The supply ports are
located in the end plates or in thepneumatic multiple connector plate. 
Push-in fittings are available fully
assembled.
The following working lines 
can be...

Subject to change – 2018/0222 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Pneumatic components
Pneumatic connection: fitting set for compressed air supply
Code for
compressed air
supplyPortDesignationSize 10
QS6
TypeSize 14
QS8
TypeSize 18
QS10
Type
Without pneumatic multiple connector plate
U, V82/84SilencerAMTE-M-LH-M5U-1/8-BU-1/4-B
3/5SilencerU-3/8-BU-1/2-BU-1/2-B
1Push-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
W,...

2018/02  – Subject to change23 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Pneumatic components
Pneumatic connection: fitting set for compressed air supply
Code for
compressed air
supplyPortDesignationSize 10
QS6
TypeSize 14
QS8
TypeSize 18
QS10
Type
Without pneumatic multiple connector plate
A, B82/84Blanking plugB-M5B-1/8B-1/4
3/5Blanking plugB-3/8B-1/2B-1/2
1Push-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
C, D82/84Blanking plugB-M5B-1/8B-1/4...

Subject to change – 2018/0224 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Pneumatic components
CPV valve terminal size 10 and 14 with valve extensions
Function blocks
CPV10-BS-5/3G-M7
CPV14-BS-5/3G-1/8Valve kit 5/3G for creating a 5/3-way
function, mid-position closed, for size
10 and 14:
The valve function “mid-position
closed” is created using one valve
slice with 2x 3/2-way valve, normally
closed (valve function code C).
The valve kit CPV10-BS-5/3G-M7...

2018/02  – Subject to change25 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Assembly
Mounting options
The valve terminals have holes for
four mounting screws. The mounting
side is the side with the pneumatic
fittings. These holes are also used
to mount the valve terminal on
a pneumatic multiple connector plate.There are other mounting options in
addition to this method:
H-rail mounting
Wall mounting
Wall mounting via flanged
pneumatic multiple...

Subject to change – 2018/0226 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Assembly
Pneumatic multiple connector plate for wall/machine mounting
With flange, with all pneumatic connections, code PWithout flange, with all pneumatic connections, code M
1
1For 10 mm, 14 mm and 18 mm
Multiple connector plate projects
past the end plates
Through mounting holes 
(without thread) in the flange
Two additional holes running
laterally through the pneumatic...

2018/02  – Subject to change27 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Display and operation
Manual override
Three types of manual override are
available:
Non-detenting via slide
Detenting
BlockedSubsequent conversion of the manual
override from non-detenting to detent­
ing or blocked is possible at any time.The locking clip on the valve must be
removed to this end. This is only
possible after the individual valve has
been removed or the tie rod...

Subject to change – 2018/0228 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Display and operation
Display and operation
You will find the following LEDs for
displaying the switching status on the
electrical connections of the CPV valve
terminal:Display of the switching status of
the pilot solenoid coil 12 for outlet
port 2
Display of the switching status of
the pilot solenoid coil 14 for outlet
port 4Readable from the “top” as well as
from the “front”...

2018/02  – Subject to change29 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Electrical components
Electrical connectionElectrical power
Contacts that are fitted on the top of
the valve slices form the interface for
various electrical connection options.
The electrical connection is attached
from above using four screws. Thismeans that the valve terminal can be
adapted to different electrical require­
ments or fieldbus protocols using the
same pneumatic...

Subject to change – 2018/0230 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Electrical components
Dimensions – Connecting cable for individual connectionDownload CAD data  www.festo.com
KMYZ-7-24-…KMEB-2-24-…-LED
1Mounting screw
2Wire end sleeve3Cable, depending on order1LED illuminated area
2Inscription label IBS-9x20 
Part No. 18182
33-wire cable 2.5 or 5 m 
(3x 0.75 mm
2)
4Connection pattern to
EN 175301-803, type C
5M2.5 screw, captive,
threaded head:...