GE Cpv10mp8 Manual

							2018/02  – Subject to change21 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Pneumatic components
Pneumatic connection
The working lines are located directly
in the valve slices. Threaded
connectors and Quick Star push-in
fittings (QS) are available for different
tubing sizes. The supply ports are
located in the end plates or in thepneumatic multiple connector plate. 
Push-in fittings are available fully
assembled.
The following working lines 
can be selected:
Large push-in connectors: code ASmall push-in connectors: code B
Threaded connectors: code C
Connection sizes for the threaded and
QS push-in fittings can be found in
the table below.
Pneumatic multiple connector plate
One-piece “connection plates” that
contain both working lines and supply
ports can be combined with a pneu­
matic multiple connector plate. This
enables the valve terminal as a pneu­
matic “function” to be separated fromthe valve ports.
The pneumatic multiple connector
plate enables different mounting
options from wall mounting to direct
passage through a cabinet wall.Easy-to-service and flexible
connection technology thanks 
to the following:
Common connection via the
pneumatic multiple connector plate
with all connections on one sideThe valve terminal can be
assembled/disassembled using
only four screws, whereby the
pneumatics remain fully connected
Quick assembly/disassembly
No errors when recommissioning as
a result of incorrect connection of
tubing
CPV valve terminalPneumatic multiple connector plate
4
2
3/512/14
82/84
11
11
2 4
11
Connection sizes
Connection to ISO 5599CPV10CPV14CPV18Comment
1/11Working airG1/8G1/4G3/8Fitting in end plate or pneumatic multiple connector
plate
2/4Working lineM7 (QS6/QS4)G1/8 (QS8/QS6)G1/4 (QS10/QS8)Connection in valve slice, connection for push-in fitting
in brackets
3/5Exhaust air portG3/8G1/2G1/2Via right-hand/left-hand end plate
G1/4G3/8G1/2Pneumatic multiple connector plate
12/14Pilot air supply portM5G1/8G1/4Fitting in end plate or pneumatic multiple connector
plate
82/84Pilot exhaust air portM5G1/8G1/4Via right-hand/left-hand end plate
M7 (M5)1)G1/8G1/4Pneumatic multiple connector plate
1) With flanged pneumatic multiple connector plate 
						

							Subject to change – 2018/0222 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Pneumatic components
Pneumatic connection: fitting set for compressed air supply
Code for
compressed air
supplyPortDesignationSize 10
QS6
TypeSize 14
QS8
TypeSize 18
QS10
Type
Without pneumatic multiple connector plate
U, V82/84SilencerAMTE-M-LH-M5U-1/8-BU-1/4-B
3/5SilencerU-3/8-BU-1/2-BU-1/2-B
1Push-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
W,  X82/84SilencerAMTE-M-LH-M5U-1/8-BU-1/4-B
3/5SilencerU-3/8-BU-1/2-BU-1/2-B
1Push-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
12/14Push-in fittingQSM-M5-6-IQS-1/8-8-IQS-1/4-10-I
Y82/84 on rightSilencerAMTE-M-LH-M5U-1/8-BU-1/4-B
82/84 on leftBlanking plugB-M5B-1/8B-1/4
3/5 on rightSilencerU-3/8-BU-1/2-BU-1/2-B
3/5 on leftBlanking plugB-3/8B-1/2B-1/2
1/11 on leftPush-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
Z82/84 on rightSilencerAMTE-M-LH-M5U-1/8-BU-1/4-B
82/84 on leftBlanking plugB-M5B-1/8B-1/4
3/5 on rightSilencerU-3/8-BU-1/2-BU-1/2-B
3/5 on leftBlanking plugB-3/8B-1/2B-1/2
12/14 on rightPush-in fittingQSM-M5-6-IQS-1/8-8-IQS-1/4-10-I
12/14 on leftBlanking plugB-M5B-1/8B-1/4
1/11Push-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
With pneumatic multiple connector plate; code M
Y82/84SilencerUC-M7U-1/8-BU-1/4-B
12/14Blanking plugB-M7B-1/8B-1/4
3/5SilencerU-1/4-BU-3/8-BU-1/2-B
1/11 on leftPush-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
11 on rightBlanking plugB-1/8B-1/4B-3/8
Z82/84SilencerUC-M7U-1/8-BU-1/4-B
3/5SilencerU-1/4-BU-3/8-BU-1/2-B
12/14Push-in fittingQSM-M7-6-IQS-1/8-8-IQS-1/4-10-I
1/11 on leftPush-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
With pneumatic multiple connector plate; code P, GQC
Y82/84SilencerAMTE-M-LH-M5U-1/8-BU-1/4-B
12/14Blanking plugB-M5B-1/8B-1/4
3/5SilencerU-1/4-BU-3/8-BU-1/2-B
1/11 on leftPush-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
11 on rightBlanking plugB-1/8B-1/4B-3/8
Z82/84SilencerAMTE-M-LH-M5U-1/8-BU-1/4-B
3/5SilencerU-1/4-BU-3/8-BU-1/2-B
12/14Push-in fittingQSM-M5-6-IQS-1/8-8-IQS-1/4-10-I
1/11 on leftPush-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I 
						

							2018/02  – Subject to change23 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Pneumatic components
Pneumatic connection: fitting set for compressed air supply
Code for
compressed air
supplyPortDesignationSize 10
QS6
TypeSize 14
QS8
TypeSize 18
QS10
Type
Without pneumatic multiple connector plate
A, B82/84Blanking plugB-M5B-1/8B-1/4
3/5Blanking plugB-3/8B-1/2B-1/2
1Push-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
C, D82/84Blanking plugB-M5B-1/8B-1/4
3/5Blanking plugB-3/8B-1/2B-1/2
1Push-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
12/14Push-in fittingQSM-M5-6-IQS-1/8-8-IQS-1/4-10-I
With pneumatic multiple connector plate; code M
E, F, H82/84Blanking plugB-M7B-1/8B-1/4
3/5Blanking plugB-1/4B-3/8B-1/2
1/11Push-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
12/14Push-in fittingQSM-M7-6-IQS-1/8-8-IQS-1/4-10-I
G, J, K82/84Blanking plugB-M7B-1/8B-1/4
3/5Blanking plugB-1/4B-3/8B-1/2
On right in 1, leftPush-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
On right in 11Blanking plugB-1/8B-1/4B-3/8
12/14Blanking plugB-M7B-1/8B-1/4
With pneumatic multiple connector plate; code P, GQC
E, F, H82/84Blanking plugB-M5B-1/8B-1/4
3/5Blanking plugB-1/4B-3/8B-1/2
1/11Push-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
12/14Push-in fittingQSM-M5-6-IQS-1/8-8-IQS-1/4-10-I
G, J, K82/84Blanking plugB-M5B-1/8B-1/4
3/5Blanking plugB-1/4B-3/8B-1/2
On right in 1, leftPush-in fittingQS-1/8-8-IQS-1/4-10-IQS-3/8-12-I
On right in 11Blanking plugB-1/8B-1/4B-3/8
12/14Blanking plugB-M5B-1/8B-1/4 
						

							Subject to change – 2018/0224 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Pneumatic components
CPV valve terminal size 10 and 14 with valve extensions
Function blocks
CPV10-BS-5/3G-M7
CPV14-BS-5/3G-1/8Valve kit 5/3G for creating a 5/3-way
function, mid-position closed, for size
10 and 14:
The valve function “mid-position
closed” is created using one valve
slice with 2x 3/2-way valve, normally
closed (valve function code C).
The valve kit CPV10-BS-5/3G-M7 or
CPV14-BS-5/3G-1/8 (incorporatinga double piloted non-return valve
function) is used for this.
This valve kit is intended for applica­
tions with one working pressure level
per valve slice, i.e. it must not be used
in dual-pressure applications (where
the pressure levels at port 1 and 11
are different).
Additional functions for valve positions
These valve extensions (vertical
stacking) can be used to add further
pneumatic functions to CPV valve
terminals size 10 and 14:Two one-way flow control valves for
flow regulation directly at the valve
terminal for
– supply air flow control
– exhaust air flow control
The vacuum flow control module
must be used with the vacuum gen­
erator with or without ejector pulse
and provides a non-return function
and adjustable ejector pulse
-H-Note
The additional functions cannot be
used in the first or last valve posi­
tion in combination with the pneu­
matic multiple connector plate M, P
and cannot be used in combination
with the pneumatic multiple
connector plate GQC, GQD.
CPV10-BS-2xGRZZ-M7
CPV14-BS-2xGRZZ-1/82x one-way flow control valve for
supply air flow control
Additional function code P
CPV10-BS-2xGRAZ-M7
CPV14-BS-2xGRAZ-1/82x one-way flow control valve for
exhaust air flow control
Additional function code Q
CPV10-BS-GRZ-V-M7
CPV14-BS-GRZ-V-1/8Vacuum flow control module
Additional function code V 
						

							2018/02  – Subject to change25 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Assembly
Mounting options
The valve terminals have holes for
four mounting screws. The mounting
side is the side with the pneumatic
fittings. These holes are also used
to mount the valve terminal on
a pneumatic multiple connector plate.There are other mounting options in
addition to this method:
H-rail mounting
Wall mounting
Wall mounting via flanged
pneumatic multiple connector plateOn rear side via wall mounting
On front side (CPV10/14 with IC
connection only)
Mounting via through-hole in wallThe attachments are mounted with a
screw and fixing bolt on the left-hand
and right-hand end plates.
Attachment for H-rail
For valve terminal CPV10/14:
CPV10/14-VI-BG-NRH-35
(mounting code H)For valve terminal CPV18:
CPV18-VI-BG-NRH-35
(mounting code H)H-rail to EN 60715, not for
accessories M, P, V (pneumatic
multiple connector plate)
Attachment for wall mounting
For valve terminal CPV10/14:
CPV10/14-VI-BG-RWL-B
(mounting code U)For valve terminal CPV18:
CPV18-VI-BG-RW
(mounting code W)
Attachment for individual connection and ET200X/ET200pro (included in the scope of delivery)
For valve terminal CPV10/14:
CPV…-VI-BG-ET200X
(mounting code X)
Through-hole in wall, for example on the machineWall mounting via pneumatic multiple connector plate 
						

							Subject to change – 2018/0226 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Assembly
Pneumatic multiple connector plate for wall/machine mounting
With flange, with all pneumatic connections, code PWithout flange, with all pneumatic connections, code M
1
1For 10 mm, 14 mm and 18 mm
Multiple connector plate projects
past the end plates
Through mounting holes 
(without thread) in the flange
Two additional holes running
laterally through the pneumatic
multiple connector plate also
enable rear mounting of the CPV
valve terminal
1
For 10 mm, 14 mm and 18 mm
Multiple connector plate fits flush
with the end plates
Mounting holes (with thread) for
wall or foot mounting are on the
connection side of the pneumatic
multiple connector plate
1Mounting holes1Mounting holes
Pneumatic multiple connector plate for control cabinet assembly
With all pneumatic connections, code GQCWith pneumatic ports 2 and 4, code GQD
1
For 10 mm and 14 mm
Multiple connector plate projects
past the end plates
Mounting holes (with thread) in the
flange
Multiple connector plate with seal
1
For 10 mm and 14 mm
Multiple connector plate fits flush
with the end plates
The mounting holes (with thread)
are on the connection side of the
pneumatic multiple connector plate
Multiple connector plate with seal
1Mounting holes1Mounting holes
With all pneumatic connections, code GQE
1
For 10 mm
Multiple connector plate projects
past the end plates
Mounting holes (with thread) in the
flange
Multiple connector plate with seal
1Mounting holes
-H-Note
The outer valve slices cannot be
equipped with valve extensions
(e.g. one-way flow control valve)
when using the pneumatic multiple
connector plate M or P.
CPV valve terminals with flat plate
silencers are only suitable for wall
mounting.If the pneumatic multiple connector
plate GQC, GQD or QQE is used,
the following limitations apply:
Generally no attachment of valve
extensions
Not in combination with H-rail
mounting
Not in combination with wall
mounting
Only with 10 mm and 14 mm 
						

							2018/02  – Subject to change27 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Display and operation
Manual override
Three types of manual override are
available:
Non-detenting via slide
Detenting
BlockedSubsequent conversion of the manual
override from non-detenting to detent­
ing or blocked is possible at any time.The locking clip on the valve must be
removed to this end. This is only
possible after the individual valve has
been removed or the tie rod of the
valve terminal has been released.
-H-Note
See the manual for instructions.
CodeGraphical symbolSizeNote
101418
NManual override, non-detenting

In the “non-detenting” version, the blue slide is held via a locking clip.
A pointed object (e.g. pen, etc.) can be used to activate the manual override
through the opening.
RManual override, detenting

In the “detenting” version, the locking clip is removed and the manual
override is activated by pushing the slide down. The non-detenting function
can be re-established by re-installing the locking clip.
VManual override, blocked

In the “blocked” version, non-detenting and detenting activation of the
manual override is prevented by means of a cover. Like the non-detenting
locking clip, this cover can be added subsequently, but then remains on
the valve. 
						

							Subject to change – 2018/0228 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Display and operation
Display and operation
You will find the following LEDs for
displaying the switching status on the
electrical connections of the CPV valve
terminal:Display of the switching status of
the pilot solenoid coil 12 for outlet
port 2
Display of the switching status of
the pilot solenoid coil 14 for outlet
port 4Readable from the “top” as well as
from the “front”
The individual connection has an LED
in the connector plug to display the
switching status.Inscription labels
Clip with inscription field on
connection plug (with individual
connection)
Inscription clips on connection
node (multi-pin plug, AS-interface,
CP installation system, Fieldbus
Direct)
CPV valve manifold with individual connectionCPV valve terminal with multi-pin plug connection
1
4 5
63
42 7
3
1Pre-assembled connecting cable
for each pilot solenoid coil
2Slot for inscription label3Yellow LED, signal status display
for pilot solenoid coils (for each
connecting cable)
4Earth terminal5Terminal lugs for solenoid coil 14
6Terminal lugs for solenoid coil 127Sub-D multi-pin plug (9-pin for
valve terminals with 4 valves,
25-pin for valve terminals with 6
or 8 valves)
Identification system
Inscription label holder
Inscription labels
type IBS 6x10
Inscription labels
type IBS-6x10 for CPV10/14
type IBS 9x20 for CPV18
Transparent inscription label
holder for paper labels (readable
from both sides)
Inscription labels can be affixed as
follows:
On the top of the electrical base
unit
On the inscription label holder
The inscription label holder permits
the addition of inscription labels, pro­
tects the manual overrides and pre­
vents them from being accidentally
activated. The inscription labels are
used to record additional information
regarding the valves.
The inscription label holders can be
ordered together with the valve ter­
minal using the order code. The rel­
evant inscription labels are supplied
in a frame and are ordered separately.The inscription label holder cannot be
used together with the relay plate.
Transparent inscription label holder
The transparent inscription label
holder CPV…-VI-ST-… offers a further
labelling option, for example for large
paper labels that can be read from
both sides.
-H-Note
The Word templates for CPV label
holders can be found at:
www.festo.com 
						

							2018/02  – Subject to change29 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Electrical components
Electrical connectionElectrical power
Contacts that are fitted on the top of
the valve slices form the interface for
various electrical connection options.
The electrical connection is attached
from above using four screws. Thismeans that the valve terminal can be
adapted to different electrical require­
ments or fieldbus protocols using the
same pneumatic part.
t [ms]
I [mA]
CPV10/14 valves are actuated by
means of an integrated current reduc­
tion circuit, which reduces power
consumption and heat build-up. This
current reduction circuit is integrated
in the basic electrical unit (multi-pin
plug or fieldbus connection) or in the
connecting cable.
During switch-off, the voltage peaks
are limited to 38 V DC.
Individual connection
With an individual connection
integration is only carried out in the
pneumatic part, the solenoid valves
are connected with individual cables. 
						

							Subject to change – 2018/0230 Internet: www.festo.com/catalogue/...
Valve terminals CPV, Compact Performance
Key features – Electrical components
Dimensions – Connecting cable for individual connectionDownload CAD data  www.festo.com
KMYZ-7-24-…KMEB-2-24-…-LED
1Mounting screw
2Wire end sleeve3Cable, depending on order1LED illuminated area
2Inscription label IBS-9x20 
Part No. 18182
33-wire cable 2.5 or 5 m 
(3x 0.75 mm
2)
4Connection pattern to
EN 175301-803, type C
5M2.5 screw, captive,
threaded head: Z-combi
cross-slot screws to EN 7045
TypeB1D1H1H2L1L2L3L5
NEBV-Z3WA2L-…9.72.912.4–26.919508.4
KMEB-2-24-2,5-LED1672622250034.616–
KMEB-2-24-5-LED5000
Dimensions – Connecting cable for relay plateDownload CAD data  www.festo.com
KRP-1-24-…
2Location for inscription labels
(order code IBS 6x10, 
Part No. 18576)
3Cable, depending on order5Mounting screw
(self-tapping KB 1.8x9)
TypeB1D1H1H2L2L3
KRP-1-24-…9.83.416.41228.318