Gateway E 4100 Service Manual
Here you can view all the pages of manual Gateway E 4100 Service Manual. The Gateway manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 111
Chapter 3101 7.Replace the CRT cable. 8.Connect the speaker and card reader board cables.
Page 112
102Chapter 3 Replacing the Bluetooth Module 1.Connect the Bluetooth cable to the Bluetooth module 2.Replace the Bluetooth module. 3.Connect the Bluetooth cable to the mainboard.
Page 113
Chapter 3103 4. Lay the Bluetooth cable into the channel to the right of the HDD bay. 5.Apply adhesive tape to hold the bluetooth cable in place.
Page 114
104Chapter 3 Replacing the Button Board 1.Replace the button board. 2.Replace the two (2) screws. 3.Connect the touchpad FFC and lock it into place.
Page 115
Chapter 3105 4.Replace the button board FFC and press down to set the adhesive. Replacing the Card Reader Board 1.Connect the two (2) FFC cables to the Card Reader Board. 2.Replace the Card Reader board into the upper case.
Page 116
106Chapter 3 3.Replace the ODD Eject module onto the guide pin and into place. 4.Replace one (1) screw to secure the ODD Eject board and two (2) screws to the Card Reader Board. 5.Attach the adhesive plastic covering the Card Reader and ODD Eject FFCs to the upper cover as shown below.
Page 117
Chapter 3107 Replacing the LED Board 1.Replace the LED board. 2.Replace the one (1) screw. 3.Connect the LED board FFC.
Page 118
108Chapter 3 4.Lock the LED board FFC. Replacing the Upper Cover 1.Align the bottom edge of the upper cover with the bottom of the chassis. 2.Ensure all wires are tucked under the upper cover then gently lower the upper cover onto the upper cover.
Page 119
Chapter 3109 3.Beginning with the bottom edge, press around the edges of the upper cover to snap it into place.
Page 120
11 0Chapter 3 4.Replace the six (6) screws in the upper cover. 5.Turn the computer over and replace three (3) screws in the HD bay. 6.Replace nine (9) screws in the bottom cover.