Garmin G1000 Manual

190-00709-04  Rev. AGarmin G1000 Pilot’s Guide for the Socata TBM 850227
FLIGHT MANAGEMENT
DEPARTURE (DP)
A Departure Procedure (DP) is loaded at the departure airport in the flight plan. Only one departure can 
be loaded at a time in a flight plan. The route is defined by selection of a departure, the transition waypoints, 
and a runway.
Figure 5-68  Departure Loading Page - Selecting the Departure
Departure Airport
Selected 
Departure
Departures Available at 
KMCI
Departure Waypoint 
SequencePreview of...

Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A228
FLIGHT MANAGEMENT
Figure 5-69  Departure Loading Page - Selecting Transition
Departure Airport
Selected 
Departure
Departure Transition Points 
Available
Selected Runway
Selected 
Departure End  Point
Preview ofSelected 
DepartureSelected Transition
Figure 5-70  Stored Flight Plan Page - Departure Inserted Inserted Departure Header
 - Departure Identifier: [departure
    airport]-[departure runway].
    [departure transition]....

190-00709-04  Rev. AGarmin G1000 Pilot’s Guide for the Socata TBM 850229
FLIGHT MANAGEMENT
ARRIVAL (STAR)
A Standard Terminal Arrival (STAR) is loaded at the destination airport in the flight plan. Only one arrival 
can be loaded at a time in a flight plan. The route is defined by selection of an arrival, the transition waypoints, \
and a runway.
Figure 5-71  Arrival Loading Page - Selecting the Arrival
Destination Airport
Selected Arrival
Arrivals Available at KCOS
Arrival Waypoint Sequence
Preview of...

Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A230
FLIGHT MANAGEMENT
Figure 5-72  Arrival Loading Page - Selecting the Transition
Destination Airport
Selected Arrival
Transitions Available with 
DBRY1
Arrival Waypoint Sequence
Preview of 
Selected Arrival
Selected Transition
Figure 5-73  Stored Flight Plan Page - Arrival Inserted Inserted Arrival Header
 - Arrival Identifier: 
    [arrival airport]-[arrival transition].
    [arrival].[arrival runway]
    (e.g., KCOS-TBE.DBRY1.ALL)  

190-00709-04  Rev. AGarmin G1000 Pilot’s Guide for the Socata TBM 850231
FLIGHT MANAGEMENT
APPROACH (APPR)
An Approach Procedure (APPR) can be loaded at any airport that has an approach available. Only one 
approach can be loaded at a time in a flight plan. The route for a selected approach is defined by designating 
transition waypoints.
Figure 5-74  Approach Loading Page - Selecting the Approach
Destination Airport
Selected 
Approach
Approaches Available at 
KCOS
Approach Waypoint 
Sequence
Preview of...

Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A232
FLIGHT MANAGEMENT
Figure 5-75  Approach Loading Page - Selecting the Transition
Destination Airport
Selected 
Approach
Transitions Available with 
Selected Approach
Approach Waypoint 
Sequence
Preview of  Selected 
Approach 
Load Approach? Selected Transition
Figure 5-76  Stored Flight Plan Page - Approach Inserted
Inserted Approach Header
 - Approach Identifier: [approach
    airport].[runway and approach type]
    (e.g., KCOS-RNAV...

190-00709-04  Rev. AGarmin G1000 Pilot’s Guide for the Socata TBM 850233
FLIGHT MANAGEMENT
FLIGHT PLAN STORAGE
The G1000 can store up to 99 flight plans, numbered 1 through 99.  The active flight plan is erased when 
the G1000 is powered off or when another flight plan is activated.  Details about each stored flight plan can be 
viewed on the Flight Plan Catalog Page and on the Stored Flight Plan Page.
Viewing information about a stored flight plan:
1) Press the FPL Key on the MFD to display the Active...

Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A234
FLIGHT MANAGEMENT
ACTIVATE A FLIGHT PLAN
Activating a stored flight plan erases the active flight plan and replaces it with the flight plan being activated. 
Inverting a stored flight plan reverses the waypoint order, erases the active flight plan, and replaces it with the 
flight plan being activated (the stored flight plan is not changed) 
Activating a stored flight plan on the MFD:
1) Press the FPL Key and turn the small FMS Knob...

190-00709-04  Rev. AGarmin G1000 Pilot’s Guide for the Socata TBM 850235
FLIGHT MANAGEMENT
DELETE A STORED FLIGHT PLAN
Individual or all stored flight plans can be deleted from the G1000 memory.
Deleting a stored flight plan:
1) Press the FPL Key and turn the small FMS Knob to display the Flight Plan Catalog Page.
2) Press the FMS Knob to activate the cursor, and turn the FMS Knob to highlight the desired flight plan.
3) Select the DELETE Softkey; press the CLR Key; or press the MENU Key, highlight...

Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A236
FLIGHT MANAGEMENT
DELETING FLIGHT PLAN ITEMS
Individual waypoints, entire airways, and entire procedures can be deleted from a flight plan. Some waypoints 
in the final approach segment (such as the FAF or MAP) can not be deleted individually. Attempting to delete 
a	waypoint	that	is	not	allowed	results	in	a	window	displaying	‘Invalid	flight	plan	modification.’
Deleting an individual waypoint from the active flight plan:
1) Press...