Gammill Creative Studio 6.0 Manual

Quilt Pattern Creation151
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 151   |  Page Planning the Quilting
Draw Options
makes a snapping sound as the cursor moves across the screen from one endpoint
to the next. CS makes a popping sound when the point is actually clicked.
When using some of the more advanced features to create new patterns, endpoint
snaps are  very useful, especially when connecting different patterns or pattern
segments. 
3.5.2.4...

Getting Started with CreativeStudio®
152
boundary is Alt +T).  This mode assumes you will be creating multiple trims so it
stays active until you turn it off. The check mark on the choice indicates that it is
active, and a message appears on the status bar. 
· Start clicking trim points on the preview area of the screen. CS assumes you know
the process and does not display instructions on the screen.  * Click as many points as needed to define the area to be trimmed. 
* Press Escape to cancel the current...

Quilt Pattern Creation153
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 153   |  Page Planning the Quilting
Draw Options
3.5.2.5
Draw Sewable
Draw Sewable  is probably the most powerful feature of CS for people who want
to create original patterns quickly and easily. Instead of moving patterns onto the
Preview area and then stitching them on the quilt, this feature will  draw
 on the
Preview area and then stitch it on the quilt. The sewable designs...

Getting Started with CreativeStudio®
154
To draw an arc, 
* Press the icon, or Alt +A (or Click Draw/Draw Sewable/Arc)
* With the mouse, click 3 times: #1 is the start point of the arc.
#2 is the middle of the arc (which will be the peak) of the arc.
#3 is the end point of the arc.
* To exit from the Draw Arc mode, press Escape, or Alt +A, or right click the screen.  
   
This is a great choice for quilting scallops or continuous curves as shown above.
Each scallop is a separate pattern, so they can be...

Quilt Pattern Creation155
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 155   |  Page Planning the Quilting
Draw Options
3.5.2.5.2  Draw Curve
Draw Curve  - The Draw (sewable) curve feature provides the ability to create
longer continuous curves using any number of clicks. The shapes will be different
because they are Cardinal Splines (the position of the last 2 clicks determines the
shape of the curve defined by the last 3 clicks). Sounds...

Getting Started with CreativeStudio®
156
the best flow for quilting patterns. 
3.5.2.5.3  Draw P2P Line
Draw P2P Lines  -The Draw (sewable) Line feature allows sewable lines to be
drawn on the screen.   Use the mouse to identify points on the screen. CS will stitch
a straight line between every sequential pair of points. This is similar to  Point-to-
Point Line icon  feature, but it uses the mouse to place the clicks instead of the
machine head.  
To begin the line drawing, 
* Press the icon, or Alt +L...

Quilt Pattern Creation157
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 157   |  Page Planning the Quilting
Draw Options
3.5.2.5.4  Draw P2P Pattern
P2P Patterns  can also be used with the Draw features. Like the  Point-to-Point-
Pattern icon  feature, clicks are used to position the  patterns start and endpoints.
(The end of one pattern is the start of the next.) CS will stitch one copy of a pattern
between every sequential pair of points. Instead...

Getting Started with CreativeStudio®
158
to the Record function, but the drawing is done on the screen, not with the sewing
head.
 
Press the icon, or
To begin the freehand drawing, 
* Press the icon, or Alt +F (or Click Draw/Draw Sewable/Freehand).
If using the mouse, the cursor changes shape, becoming a +. Press and hold the
left mouse button down to begin drawing and move the mouse as smoothly as
possible. Releasing the mouse button stops the drawing, but pressing it again
begins the drawing again....

Quilt Pattern Creation159
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 159   |  Page Planning the Quilting
Draw Options
3.5.2.6
Draw Measure
Draw Measure  
uses the mouse to measure the image of the quilt. 
Using the mouse, click  on Draw Command and choose Measure (or use the Alt+M
shortcut). This uses the mouse and screen to take measurements of the items
(boundaries and patterns) you have moved to the preview area. These are real
measurements,...

Getting Started with CreativeStudio®
160
- Move the machine head to the start point and click OK. 
- Move the machine head to the end point and click OK. 
- Click the STOP button to stop measuring. 
To make the measurement on the Preview Area use the Draw Measure icon 
- Click or tap the start point on the Preview area.
- Click or tap the end point on the Preview area
- Click or tap the X in the upper right corner of the dialog box to stop.
Right
 click on the Destination field ( dont left click it...