Gammill Creative Studio 6.0 Manual

Quilt Pattern Creation131
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 131   |  Page Planning the Quilting
Right Click Options
3. Move the background pattern over the applique boundary.
4. Choose Fill - Outside using either method. 
Be Patient !  CS is creating a new pattern. 
   
Notice that the pattern parts that would have stitched over the heart applique are
gone. The remaining pattern parts are connected with new segments that follow the...

Getting Started with CreativeStudio®
132
3.5.1.17
Toggle Sewn or Unsewn
Toggle Pattern Sewn  (or Toggle Group Sewn) means it wont stitch out.  
Toggle Pattern Unsewn
 (or Toggle Group Unsewn) means it will.  
* Select the pattern(s)
* Right click them.
* Choose Toggle Pattern Sewn (or Unsewn) for an individual pattern.
* Choose Toggle Group Sewn (or Unsewn) to a group.
When a selected pattern is changed using Toggle Pattern Sewn, it does not look
like anything happened until you deselect the pattern by...

Quilt Pattern Creation133
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 133   |  Page Planning the Quilting
Right Click Options
3.5.1.18
Delete
Delete  function seems obvious, but there is a hierarchy regarding which objects will
be deleted, and in what order, which is: 1. Selected Trims (sometimes called trim boundaries).
2. Selected Patterns.
3. Selected Boundaries. 
It is important to remember:
· Only 1 boundary can be selected at one time (it...

Getting Started with CreativeStudio®
134
3.5.1.19.1  Shift Selected
Shift Selected to 1 point  - will relocate the selected pattern(s) only. It uses one
point called the Known Point.  In our example, the block on the right shows the
original placement of the pattern. The block on the left shows the new placement. 
Here are the steps to realign a pattern to the new block placement.  
Step 1 - Mark the boundary of the new block location.
Step 2 - Select the patterns to be relocated. 
Step 3 - Right click...

Quilt Pattern Creation135
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 135   |  Page Planning the Quilting
Right Click Options
   
It is always a good idea to verify the accuracy of new alignment. This can be done
easily by turning on the crosshairs ( View Command
) and moving the machine
head to various points, checking the pattern alignment. Remember, Shift Selected
only realigns the selected patterns. 
3.5.1.19.2  Shift All to 1 point
Shift All...

Getting Started with CreativeStudio®
136
· Click on Relocate and Choose Shift All to 2 Points.  
· A dialog box appears, giving instructions.
· Use the mouse to click the first Known point on the CAD screen. Because our
example is using the start and end points of the pattern,  Endpoint snaps
 can
help to select these points exactly. 
·Use the mouse to click the second Known point on the CAD screen. 
150 

Quilt Pattern Creation137
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 137   |  Page Planning the Quilting
Right Click Options
 
Now you will identify the two corresponding control points on the quilt. 
· Follow the instructions in the dialog box:
· Move the machine head to the first Known point and press Yes. 
(in our example this is the start of the last row quilted).
· Follow the instructions in the next dialog box:
· Move the machine head to the...

Getting Started with CreativeStudio®
138
3.5.1.20
Combine Patterns
Combine Pattern  - will group together all the selected patterns,so they can be
used as a single pattern for the duration of the project. If the patterns are positioned
to sew in one continuous line (like repeated patterns in a border) there will not be a
jump stitch between the selected patterns. This is very handy for sashings and
border areas. If the patterns are not continuous, there will be tieoffs (or a prompt for
the bobbin pull-up...

Quilt Pattern Creation139
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 139   |  Page Planning the Quilting
Right Click Options
3.5.1.21
Export Pattern
Export Pattern  - allows a newly created pattern to be exported as a special CS
file type that  can be used by other CS projects (respecting all copyright laws of
course!) . Sometimes the new patterns are so customized that they would probably
only work on the current project. Other times the new...

Getting Started with CreativeStudio®
140
3.5.1.22
Options
Options  
- refer to how patterns are displayed or stitched. There are certain choices
that a pattern designer can use that affect how the pattern is displayed on the
screen, or how it is stitched out. These choices can make it easy to use the pattern
as it was originally designed, but might not be helpful in derivative patterns. So, CS
allows the quilter to choose which options to keep/remove as needed.
Using  Node Mode
, Designers can Mark...