Gammill Creative Studio 6.0 Manual

Quilt Pattern Setup and Edit91
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 91   |  Page Planning the Quilting
Single Blocks
Resize Pattern Proportionately . With the exception of the Stretch Pattern
Anchor, the square handles at the four corners will change both dimensions
proportionately (also known as  Freeze Aspect). Move the cursor over one of the
corner squares and press down on the left button; the center of the square turns
darker (purple or...

Getting Started with CreativeStudio®
92
TIP:  
The Stretch Resizing Handles are very powerful so small
movements work best. Use Ctrl Z (Undo) to return to the original shape.
Reposition Patterns  by grabbing the center circle and dragging the pattern.
When the cursor is over the center circle, it becomes a +. Hold the left mouse
button down and drag the pattern to the new location. Edge anchor, Center anchor
and Stretch anchor will function the same way. 
Design It Yourself:   To Nudge a pattern (move it...

Quilt Pattern Setup and Edit93
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 93   |  Page Planning the Quilting
Repeat Patterns
3.4.3 Repeat Patterns
Repeat Patterns is the second most common method of quilting. Repeat Patterns
uses measurements to determine pattern sizes. Boundaries are still used, but they
are for reference rather than resizing patterns. After repeated patterns are placed on
the CAD screen, they can still be changed using the...

Getting Started with CreativeStudio®
94
* Remember to measure in the same direction that the pattern will be sewn. The
measure function calculates the angle automatically, so use that angle as the
squaring angle. 
 
* Measuring the block diagonally will give the height, width, length and the angle of
the diagonal. 
* It is important to understand how the angle rotations are defined. 
   CS measures the angles by rotating counterclockwise.
To transfer measurements to pattern details . CS remembers the...

Quilt Pattern Setup and Edit95
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 95   |  Page Planning the Quilting
Repeat Patterns
1. Make the measurement. (Be sure the destination field is not already selected.) - Move the machine head to the start point and click OK. 
- Move the machine head to the end point and click OK.  
2. Click on Cancel to stop measuring. 
3. Right click on the Destination field. The Transfer box appears. 
4. Click on one of the...

Getting Started with CreativeStudio®
96
General Stitcher Settings
 - The first several settings refer to how the pattern will
be stitched. These settings are based on the current CS default settings.
Pattern
 Name
 - the name of the pattern highlighted in cyan.
Stitches Per Inch
 applies to this pattern.
Pattern Speed
 
is measured as a percentage of maximum motor speed. 65 means
65% of the maximum speed.  
Tie Stitches Per Inch
  is the size of the stitches taken when doing tieoff stitches.
Tie...

Quilt Pattern Setup and Edit97
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 97   |  Page Planning the Quilting
Repeat Patterns
Individual Pattern Details
Reset to Designed  - this choice allows the original pattern dimensions to be reset. 
Freeze Aspect 
- ON means the ratio of Height:Width remains the same when the
size changes. So, if one of the dimensions is changed, CS will change the other
to keep the ratio the same. OFF means CS will allow the...

Getting Started with CreativeStudio®
98
Spacing  - The pattern placement can be adjusted as desired. The Horizontal
spacing affects the space between the repeats. The Vertical spacing affects the
space between rows. Space can be increased (positive spacing) or decreased
(negative spacing). CS automatically includes the spacing adjustment when it
calculates the Total Width and Total Height of the area to be quilted. 

Quilt Pattern Setup and Edit99
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 99   |  Page Planning the Quilting
Repeat PatternsQuilt Angle  - is the number of degrees that the set (1 or more) of repeated patterns
is angled.
Connect ... affects how CS connects the patterns. Bobbin PullUp means patterns are
placed side by side and CS stitches them individually - the best choice for block
designs. Connect means CS places them so the end point of one...

Getting Started with CreativeStudio®
100
3.4.3.5
Step5: Adjust and Quilt
Step 5:   Adjusting (resizing) Patterns.
The previous section explained in full detail  How To adjust
 the patterns. But, why
do you need to? CS will plan the quilt patterns and will stitch them with absolute
perfection. Unfortunately, quilts wont ever be that perfect, so this is the time to
create reference boundaries. 
It is a fact that borders and blocks are rarely square, so by creating a reference
boundary around them, you will...