Fujitsu P42vha40 Users Manual

							E-7
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS
Speaker
DisplaySpeaker (optional)
Remote 
control
VCR Î E-8
DVD recorder/player Î E-9PC Î E-11
VCR or other external components See P. Î
Satellite tuner Î E-10To AC outlet
MHD01661-01_E.book  7 ページ  ２００４年１１月１６日　火曜日　午後４時３３分
 
						

							E-8
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
• Connect the video signal cable to either the S-video input terminal or the video input terminal.
• If the unit to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.
VCR
To video output
To S-video output
To audio outputsTo S-video input
To audio inputs To video input
Display bottom
MHD01661-01_E.book  8 ページ  ２００４年１１月１６日　火曜日　午後４時３３分
 
						

							E-9
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
• Connect the video signal cable to the HDMI input terminal, component video input terminal, S-video input terminal, or the video input 
terminal. 
• If the component to be connected is equipped with HDMI output terminal, component video output terminal, it is recommended to connect 
to the component video terminal.
DVD RECORDER/PLAYER
To S-video outputTo video outputTo component video output
To audio outputsTo video input
To S-video input
To audio inputs To component video input
Display bottom
To HDMI output
To HDMI input
Note
• Unplug the power cord from the AC outlet before you connect external components. 
• Also refer to the instructions for the component to be connected. 
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input. 
• Terminal layout may differ and functions may not be available with some models and some device options.
MHD01661-01_E.book  9 ページ  ２００４年１１月１６日　火曜日　午後４時３３分
 
						

							E-10
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
• Connect the video signal cable to the HDMI input terminal, component video input terminal, S-video input terminal, or the video input 
terminal. 
• If the component to be connected is equipped with HDMI output terminal, component video output terminal, it is recommended to connect to the 
component video terminal.
SATELLITE TUNER
Display bottom
To S-video outputTo video outputTo component video output
To audio outputsTo video input
To S-video input
To audio inputs To component video input
To HDMI output
To  H D M I  i n p u t Antenna (commercially available product)
MHD01661-01_E.book  10 ページ  ２００４年１１月１６日　火曜日　午後４時３３分
 
						

							E-11
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
• As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. 
PC
To DVI-D input
To RGB output (mD-sub)To RGB output (DVI-D)
To mD-sub input
Display bottom
To audio inputs To audio output
Note
• Unplug the power cord from the AC outlet before you connect external components. 
• Also refer to the instructions for the component to be connected. 
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
• Terminal layout may differ and functions may not be available with some models and some device options.
MHD01661-01_E.book  11 ページ  ２００４年１１月１６日　火曜日　午後４時３３分
 
						

							E-12
BASIC OPERATIONS
TURNING THE POWER ON AND STAND-BY
1
Press/I to the left at the bottom of 
the display to the ON
state.
The power lamp lights up.
2
Press  on the remote control.
The color of the power lamp changes from “Red” to 
“Green”.
3
Press  – & or ) – *.
Select the video mode to input.
4
Press  when the power is ON.
The color of the power lamp changes from “Green” 
to “Red” and the the power turns “OFF (Stand-by 
state)”.
* You can also use the buttons 
on the display’s control 
panel to perform these steps.
(for the W/R models)
* You can also use the buttons 
on the display’s control 
panel to perform these steps.
(for the U model)
MHD01661-01_E.book  12 ページ  ２００４年１１月１６日　火曜日　午後４時３３分
 
						

							E-13
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
ADJUSTING THE VOLUME
Adjusting the volume
Press 1 to increase the volume.
Press 
2 to reduce the volume.
* Note that the volume level remains stored even when you 
turn OFF the power.
Muting the audio
Press -.
The audio is removed.
Press again to restore the audio to the original level.
The mute mode can also be released by pressing the volume 
buttons.
* You can also use the buttons 
on the display’s control 
panel to perform these steps.
(Ex. the W model)
When the volume adjustment button is 
pressed
Note
• Functions may not be available with some models and some device options.
MHD01661-01_E.book  13 ページ  ２００４年１１月１６日　火曜日　午後４時３３分
 
						

							E-14
SELECTING INPUT MODE
VIDEO INPUT MODE (for the W/R models)
1
Press  to select the input mode.
You can select from VIDEO1 mode to VIDEO4 
mode.
The video modes corresponding to each input 
terminal are as follows.
• VIDEO1: Video
• VIDEO2: S-video
• VIDEO3: Component video
• VIDEO4: Component video
* For selection of the input terminal, see  
“SETTING THE INPUT TERMINALS” on 
P. E-31.
VIDEO INPUT MODE (for the U model)
1
Press  to select the input mode.
You can select from VIDEO1 mode to VIDEO5 
mode.
The video modes corresponding to each input 
terminal are as follows.
• VIDEO1: Video
• VIDEO2: S-video
• VIDEO3: Component video
• VIDEO4: Component video
• VIDEO5: HDMI
* For selection of the input terminal, see  
“SETTING THE INPUT TERMINALS” on 
P. E-31.
* You can also use the buttons 
on the display’s control 
panel to perform these steps.
Video1 mode
* You can also use the buttons 
on the display’s control 
panel to perform these steps.
Video1 mode
MHD01661-01_E.book  14 ページ  ２００４年１１月１６日　火曜日　午後４時３３分
 
						

							E-15
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
RGB INPUT MODE
1
Press  to select the input mode.
You can select between the modes from RGB1 to 
RGB2.
The input terminal of each RGB mode is as follows.
[for the W/U models]
• RGB1: DVI-D
• RGB2: mD-sub
[for the R model]
• RGB1: mD-sub
* For selection of the input terminal, see  
“SETTING THE INPUT TERMINALS” on 
P. E-31.
* You can also use the buttons 
on the display’s control 
panel to perform these steps.
(Ex. the U model)
RGB1 mode
MHD01661-01_E.book  15 ページ  ２００４年１１月１６日　火曜日　午後４時３３分
 
						

							E-16
OTHER BASIC OPERATIONS
CONVENIENT FUNCTIONS
On-screen information
Press 3.
The mode is indicated on the screen for 5 seconds.
Picture Mode
Press 4.
This button can be used to switch the picture mode.
In the picture mode, you can switch between the set status and the fine mode.
* For the picture mode settings, see “Setting Picture Mode (P. E-22)”.
Picture Memory
Press 5.
This button can be used to recall the settings of the picture memories 1 – 8. Each time this button is 
pressed, the setting changes as follows.
* For the picture memory settings, see “Setting Picture Memory (P. E-22)”.
(Ex. the W/R models)
Note
• Functions may not be available with some models and some device options.
MHD01661-01_E.book  16 ページ  ２００４年１１月１６日　火曜日　午後４時３３分