Fujitsu P42vha40 Users Manual

English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
÷–Œƒ
Before Use
• CHECKING ACCESSORIES .................................................................................... E-2
• INSTALLATION ........................................................................................................ E-3
Usage
• PART NAMES AND FUNCTIONS ............................................................................ E-4
Others
•...

E-2
CHECKING ACCESSORIES
 
Carefully check the terminals for position and type before making any connections.
Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.
Ferrite cores
These ferrite cores are used to attenuate undesired signals.
Two big ferrite cores
When connecting a cable to the power input terminal, video input terminal, attach one of these ferrite cores to the cable near the terminal.
Two small ferrite cores
When...

E-3
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
÷–Œƒ
INSTALLATION
To prevent the displays internal components from overheating, make sure that the display is installed in a well-ventilated location.
Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer 
performs the installation.
See the appropriate instruction manual for more information on the installation hardware you select.
To prevent an...

E-4
PART NAMES AND FUNCTIONS
DISPLAY SECTION – FRONT
Power indicator lamp 
This lamp shows the state of the power supply. 
Lit (red): Stand-by state
Lit (green): Power ON state
Flashing (red or green): Malfunction (Flashes differently 
depending on the type of 
malfunction.) 
Remote control signal receiver 
Receives signals from the remote control. 
Input mode selector button  [MODE] 
Input mode selector button  [MODE] 
Switches between picture input modes. 
VOL + button 
VOL - button 
Adjusts the...

E-5
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
÷–Œƒ
/ I power switch
If this button is pressed when the power indicator lamp is off, the indicator lamp will light.
The power can be turned on and the standby mode selected by using the remote control or the control panel of the display.
If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.
*Power is still supplied to parts of the display even if the indicator lamp is off.
HDMI input...

E-6
PART NAMES AND FUNCTIONS (Continued)
RGB2 input terminal (RGB2 INPUT/mD-sub) for the W/U/A models / 
RGB1 input terminal (RGB1 INPUT/mD-sub) for the R model
Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.
Component video input terminal (VIDEO3 INPUT) 
Component video input terminal (VIDEO4 INPUT)
Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player....

E-7
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
÷–Œƒ
DESCRIPTION OF INPUT TERMINALS 
DVI-D terminal (RGB1 INPUT/DVI-D) 
for the W/U/A modelsPin No. Signal Pin No. Signal Pin No. Signal
1 T.M.D.S. Data2– 9 T.M.D.S. Data1– 17 T.M.D.S. Data0–
2 T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+
3
T.M.D.S. Data2 
Shield11T.M.D.S. Data1 
Shield19T.M.D.S. Data0 
Shield
4— 12— 20—
5— 13— 21—
6 DDC Clock 14 +5V Power 22
T.M.D.S. Clock Shield
7 DDC Data 15 Ground (for +5V) 23 T.M.D.S....

E-8
PART NAMES AND FUNCTIONS (Continued)
HDMI (High-Definition Multimedia Interface)
HDMI is a standard for home digital interfaces, which can transmit images as well as multichannel 
audio signals and control signals through one cable.
HDMI input terminal (VIDEO5 INPUT/HDMI) 
for the U modelPin No. Input signal Pin No. Input signal
1 T.M.D.S. Data2+ 11 T.M.D.S. Clock Shield
2 T.M.D.S. Data2 Shield 12 T.M.D.S. Clock–
3 T.M.D.S. Data2– 13 CEC
4 T.M.D.S. Data1+ 14 Reserve
5 T.M.D.S. Data1 Shield 15 DDC...

E-9
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
÷–Œƒ
OPTIONS
* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.
* The colors of options do not match the display colors perfectly.
* To improve the function and performance of optional accessories, specifications and part names may change. Consult your local dealer 
before purchasing.  Wall-mounting Bracket 0° to 15° mounting angle...

E-10
MAIN SUPPORTED SIGNALS
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of 
the first input signal. 
To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on the User’s manual (2/2) to adjust 
the parameters.
When you finish, the settings will be automatically stored.  Thus, when the display receives that signal, pictures will be displayed in 
accordance with...