Fujitsu P42vha40 Users Manual

E-11
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
÷–Œƒ
In the Comp.video and Video/S-video, the display has been factory-set as follows for different input signals: 
Main corresponding signals (Comp.video mode)          Main corresponding signals (Video, S-video mode) 
Horizontal 
frequency (kHz)Ver t i c al  
frequency (Hz)Signal HDMIHorizontal 
frequency (kHz)Ve r t i c a l
 frequency (Hz)Signal
15.73 59.94 SDTV 480i 15.73 59.94 NTSC
15.63 50.00 SDTV 576i 15.63 50.00 PAL
31.47...

E-12
SPECIFICATION
WIDE PLASMA DISPLAY
Regulation 
• UL, CSA Safety: UL6500, C-UL 
EMC: FCC Part 15 Class B, ICES-003 Class B 
• CE Safety: EN60065 
EMC: EN55022  1998, Class B 
EN61000-3-2 1995 
EN61000-3-3 1995 
EN55024 1998 
EN61000-4-2 1995 
EN61000-4-3 1996 
EN61000-4-4 1995 
EN61000-4-5 1995 
EN61000-4-6 1996 
EN61000-4-8 1993 
EN61000-4-11 1994 
• AS Safety: IEC60065 
EMC: AS/NZS 3548Model P42VHA40W/A P42HHA40W/A P50XHA40W/A P55XHA40W/A P63XHA40W/A
Screen size 
42 wide screen:
92.1 cm (W) x 51.8...

E-13
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
÷–Œƒ
WIDE PLASMA DISPLAY
Regulation 
• UL, CSA Safety: UL6500, C-UL 
EMC: FCC Part 15 Class B, ICES-003 Class B 
• CE Safety: EN60065 
EMC: EN55022  1998, Class B 
EN61000-3-2 1995 
EN61000-3-3 1995 
EN55024 1998 
EN61000-4-2 1995 
EN61000-4-3 1996 
EN61000-4-4 1995 
EN61000-4-5 1995 
EN61000-4-6 1996 
EN61000-4-8 1993 
EN61000-4-11 1994 
• AS Safety: IEC60065 
EMC: AS/NZS 3548Model P42VHA40U P42HHA40U P50XHA40U P55XHA40U...

E-14
SPECIFICATION (Continued)
WIDE PLASMA DISPLAY
Regulation 
• CE Safety: EN60065 
EMC: EN55022  1998, Class B 
EN61000-3-2 1995 
EN61000-3-3 1995 
EN55024 1998 
EN61000-4-2 1995 
EN61000-4-3 1996 
EN61000-4-4 1995 
EN61000-4-5 1995 
EN61000-4-6 1996 
EN61000-4-8 1993 
EN61000-4-11 1994 
• AS Safety: IEC60065 
EMC: AS/NZS 3548Model P42VHA40R P63XHA40R
Screen size  42 wide screen:
92.1 cm (W) x 51.8 cm (H)  (105.7 cm diagonal) 
36.3 inch (W) x 20.4 inch (H)  (41.6 inch diagonal) 63 wide screen:
139.3 cm...

English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
Before Use
• INFORMATION ............................................................ E-2
Usage
• USING THE REMOTE CONTROL ............................... E-3
• CONNECTING THE DISPLAY TO EXTERNAL 
EQUIPMENT ................................................................ E-7
• BASIC OPERATIONS ................................................ E-12
• SELECTING INPUT MODE ....................................... E-14
• OTHER BASIC...

E-2
INFORMATION
• Receptacle
Make sure that the power cable’s grounding wire is grounded.
The display comes with a 3-prong power plug; one prong is connected to the grounding wire.  If you have only a 2-hole receptacle, you 
will need to have it replaced.  Contact your dealer for more information.
• Have the display inspected and cleaned by your dealer at regular intervals.
• Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods.  To ensure that the display...

E-3
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
USING THE REMOTE CONTROL
For details, see page Î.
REMOTE CONTROL (for the W/R models)
 button Î E-12
Switches between Power On and Standby.

- (MUTE button) Î E-13
Temporarily mutes the audio.
To return the audio to normal, press this button once again, or press the 
1 does the 
2 work also. 

3 (DISPLAY button) Î E-16
Press this button to display the input mode, and screen size status. 
The status is displayed for about five...

E-4
USING THE REMOTE CONTROL (Continued)
For details, see page Î.
REMOTE CONTROL (for the U model)
 button Î E-12
Switches between Power On and Standby.

- (MUTE button) Î E-13
Temporarily mutes the audio.
To return the audio to normal, press this button once again, or press the 
1 does the 
2 work also. 

3 (DISPLAY button) Î E-16
Press this button to display the input mode, and screen size status. 
The status is displayed for about five seconds.

4 (PICTURE MODE button) Î E-16
Use this button to...

E-5
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or 
heating equipment.
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.
PUTTING BATTERIES IN THE REMOTE CONTROL
(1) To remove the cover,...

E-6
USING THE REMOTE CONTROL (Continued)
Point the remote control at the display’s signal receiver when using it.
Make sure that there are no obstacles between the remote control and the display’s signal receiver.
EFFECTIVE RANGE FOR THE REMOTE CONTROL
Left
Upper
Lower
Right
5 m (Front)
30°30°
20°
20°
Note
The remote control may not function properly if you use a high-frequency fluorescent lamp.  If you experience problems, move the lamp or use the 
remote control from a different position....