Fujitsu P42vha40 Users Manual
Have a look at the manual Fujitsu P42vha40 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
E-11 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé ÷–Œƒ In the Comp.video and Video/S-video, the display has been factory-set as follows for different input signals: Main corresponding signals (Comp.video mode) Main corresponding signals (Video, S-video mode) Horizontal frequency (kHz)Ver t i c al frequency (Hz)Signal HDMIHorizontal frequency (kHz)Ve r t i c a l frequency (Hz)Signal 15.73 59.94 SDTV 480i 15.73 59.94 NTSC 15.63 50.00 SDTV 576i 15.63 50.00 PAL 31.47 59.94 SDTV 480p 15.63 50.00 SECAM 31.25 50.00 SDTV 576p 15.63 59.52 PAL60 45.00 60.00 HDTV 720p 15.63 50.00 N-PAL 37.50 50.00 HDTV 720p 15.73 59.95 M-PAL 33.75 60.00 HDTV 1080i 15.73 59.94 4.43NTSC 28.13 50.00 HDTV 1080i Note • Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation. • With some input signals, Out of range may appear even when the horizontal and vertical frequencies are within their permissible ranges. In this event, match the input signals to another frequency rather than those listed above. • You can check input signals through Information on the FEATURES Menu screen. (See Users Manual (2/2)) • In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items. • All terms (i.e., company and product names) used in this document are trademarks or registered trademarks. MHD01695_E.book 11 ページ ２００５年２月１日 火曜日 午後７時７分
E-12 SPECIFICATION WIDE PLASMA DISPLAY Regulation • UL, CSA Safety: UL6500, C-UL EMC: FCC Part 15 Class B, ICES-003 Class B • CE Safety: EN60065 EMC: EN55022 1998, Class B EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994 • AS Safety: IEC60065 EMC: AS/NZS 3548Model P42VHA40W/A P42HHA40W/A P50XHA40W/A P55XHA40W/A P63XHA40W/A Screen size 42 wide screen: 92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) 42 wide screen: 92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal) 36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal)50 wide screen: 110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal) 43.5 inch (W) x 24.5 inch (H) (50 inch diagonal)55 wide screen: 122.9 cm (W) x 69.1 cm (H) (140.0 cm diagonal) 48.4 inch (W) x 27.2 inch (H) (55.1 inch diagonal)63 wide screen: 139.3 cm (W) x 78.3 cm (H) (159.8 cm diagonal) 54.8 inch (W) x 30.8 inch (H) (62.9 inch diagonal) Aspect ratio 16:9 (wide) Number of pixels 852 (H) x 480 (V) 1024 (H) x 1024 (V) 1366 (H) x 768 (V) Weight 31.5 kg / 69 lbs 45 kg / 99 lbs 55 kg / 121 lbs 72 kg / 159 lbs Outer dimensions 103.9 (W) x 64.0 (H) x 8.7 (D) cm 40.9 (W) x 25.2 (H) x 3.4 (D) inch (does not include outer projections) 121.6 (W) x 72.6 (H) x 10.0 (D) cm 47.9 (W) x 28.6 (H) x 3.9 (D) inch (does not include outer projections)138.0 (W) x 80.8 (H) x 12.5 (D) cm 54.3 (W) x 31.8 (H) x 4.9 (D) inch (does not include outer projections)150.4 (W) x 89.4 (H) x 12.3 (D) cm 59.2 (W) x 35.2 (H) x 4.8 (D) inch (does not include outer projections) Power supply 110-240 VAC 50/60 Hz Current rating 3.2-1.35 A 4.2-1.8 A 4.4-1.9 A 5.8-2.3 A 6.8-2.6 A External equipment terminals Video input terminalsVIDEO1 INPUT (Video input) RCA terminal 1 Vp-p/75 Ω VIDEO2 INPUT (S-video input) S terminal Y: 1 Vp-p/75 Ω C: 0.286 Vp-p/75 Ω VIDEO3/VIDEO4 INPUT 3 RCA terminals Y: 1 Vp-p/75 Ω (Component video input) P B/CB: 0.7 Vp-p/75 Ω PR/CR: 0.7 Vp-p/75 Ω PC input terminal RGB1 input DVI-D terminal (EIA/CEA-861B Compliant) RGB2 input mD-sub, 3 rows, 15-pin Picture signal: 0.7 Vp-p/75 Ω Synchronization signal:TTL level Audio terminals 2 audio input pin jacks (L/R) (3 lines) 500 mVrms/at least 22 kΩ Control terminal RS-232C connector (D-sub 9-pin) External speaker output terminal Max. output: 10 W + 10 W, 6 Ω Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F Humidity: 20 to 80 % Accessories 3 users manuals, 1 power cable, 2 small ferrite cores, 2 big ferrite cores, 1 remote control, 2 AA batteries, 1 residential warranty (for the A model) MHD01695_E.book 12 ページ ２００５年２月１日 火曜日 午後７時７分
E-13 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé ÷–Œƒ WIDE PLASMA DISPLAY Regulation • UL, CSA Safety: UL6500, C-UL EMC: FCC Part 15 Class B, ICES-003 Class B • CE Safety: EN60065 EMC: EN55022 1998, Class B EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994 • AS Safety: IEC60065 EMC: AS/NZS 3548Model P42VHA40U P42HHA40U P50XHA40U P55XHA40U P63XHA40U Screen size 42 wide screen: 92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) 42 wide screen: 92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal) 36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal)50 wide screen: 110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal) 43.5 inch (W) x 24.5 inch (H) (50 inch diagonal)55 wide screen: 122.9 cm (W) x 69.1 cm (H) (140.0 cm diagonal) 48.4 inch (W) x 27.2 inch (H) (55.1 inch diagonal)63 wide screen: 139.3 cm (W) x 78.3 cm (H) (159.8 cm diagonal) 54.8 inch (W) x 30.8 inch (H) (62.9 inch diagonal) Aspect ratio 16:9 (wide) Number of pixels 852 (H) x 480 (V) 1024 (H) x 1024 (V) 1366 (H) x 768 (V) Weight 31.5 kg / 69 lbs 45 kg / 99 lbs 55 kg / 121 lbs 72 kg / 159 lbs Outer dimensions 103.9 (W) x 64.0 (H) x 8.7 (D) cm 40.9 (W) x 25.2 (H) x 3.4 (D) inch (does not include outer projections) 121.6 (W) x 72.6 (H) x 10.0 (D) cm 47.9 (W) x 28.6 (H) x 3.9 (D) inch (does not include outer projections)138.0 (W) x 80.8 (H) x 12.5 (D) cm 54.3 (W) x 31.8 (H) x 4.9 (D) inch (does not include outer projections)150.4 (W) x 89.4 (H) x 12.3 (D) cm 59.2 (W) x 35.2 (H) x 4.8 (D) inch (does not include outer projections) Power supply 110-240 VAC 50/60 Hz Current rating 3.2-1.35 A 4.2-1.8 A 4.4-1.9 A 5.8-2.3 A 6.8-2.6 A External equipment terminals Video input terminalsVIDEO1 INPUT (Video input) RCA terminal 1 Vp-p/75 Ω VIDEO2 INPUT (S-video input) S terminal Y: 1 Vp-p/75 Ω C: 0.286 Vp-p/75 Ω VIDEO3/VIDEO4 INPUT 3 RCA terminals Y: 1 Vp-p/75 Ω (Component video input) P B/CB: 0.7 Vp-p/75 Ω PR/CR: 0.7 Vp-p/75 Ω VIDEO5 INPUT HDMI terminal (HDMI type A connector) PC input terminal RGB1 input DVI-D terminal (EIA/CEA-861B Compliant) RGB2 input mD-sub, 3 rows, 15-pin Picture signal: 0.7 Vp-p/75 Ω Synchronization signal:TTL level Audio terminals 2 audio input pin jacks (L/R) (3 lines) 500 mVrms/at least 22 kΩ Control terminal RS-232C connector (D-sub 9-pin) External speaker output terminal Max. output: 10 W + 10 W, 6 Ω Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F Humidity: 20 to 80 % Accessories 3 users manuals, 1 power cable, 2 small ferrite cores, 2 big ferrite cores, 1 remote control, 2 AA batteries Note • Specifications and external appearance may be change for the sake of improvement. • Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.6 m or 5.2 feet for 42 / at least 1.9 m or 6.2 feet for 50 / at least 2.1 m or 6.9 feet for 55 / at least 2.4 m or 7.9 feet for 63) from the screen and to look occasionally away while working. • is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas. MHD01695_E.book 13 ページ ２００５年２月１日 火曜日 午後７時７分
E-14 SPECIFICATION (Continued) WIDE PLASMA DISPLAY Regulation • CE Safety: EN60065 EMC: EN55022 1998, Class B EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994 • AS Safety: IEC60065 EMC: AS/NZS 3548Model P42VHA40R P63XHA40R Screen size 42 wide screen: 92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) 63 wide screen: 139.3 cm (W) x 78.3 cm (H) (159.8 cm diagonal) 54.8 inch (W) x 30.8 inch (H) (62.9 inch diagonal) Aspect ratio 16:9 (wide) Number of pixels 852 (H) x 480 (V) 1366 (H) x 768 (V) Weight 31.5 kg / 69 lbs 72 kg / 159 lbs Outer dimensions 103.9 (W) x 64.0 (H) x 8.7 (D) cm 40.9 (W) x 25.2 (H) x 3.4 (D) inch (does not include outer projections) 150.4 (W) x 89.4 (H) x 12.3 (D) cm 59.2 (W) x 35.2 (H) x 4.8 (D) inch (does not include outer projections) Power supply 110-240 VAC 50/60 Hz Current rating 4.2-1.7 A 6.8-2.6 A External equipment terminals Video input terminalsVIDEO1 INPUT (Video input) RCA terminal 1 Vp-p/75 Ω VIDEO2 INPUT (S-video input) S terminal Y: 1 Vp-p/75 Ω C: 0.286 Vp-p/75 Ω VIDEO3/VIDEO4 INPUT 3 RCA terminals Y: 1 Vp-p/75 Ω (Component video input) P B/CB: 0.7 Vp-p/75 Ω PR/CR: 0.7 Vp-p/75 Ω PC input terminal RGB1 input mD-sub, 3 rows, 15-pin Picture signal: 0.7 Vp-p/75 Ω Synchronization signal:TTL level Audio terminals 2 audio input pin jacks (L/R) (3 lines) 500 mVrms/at least 22 kΩ Control terminal RS-232C connector (D-sub 9-pin) External speaker output terminal Max. output: 10 W + 10 W, 6 Ω Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F Humidity: 20 to 80 % Accessories 3 users manuals, 1 power cable, 2 small ferrite cores, 2 big ferrite cores, 1 remote control, 2 AA batteries Note • Specifications and external appearance may be change for the sake of improvement. • Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.6 m or 5.2 feet for 42 / at least 1.9 m or 6.2 feet for 50 / at least 2.1 m or 6.9 feet for 55 / at least 2.4 m or 7.9 feet for 63) from the screen and to look occasionally away while working. • is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas. MHD01695_E.book 14 ページ ２００５年２月１日 火曜日 午後７時７分
English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 Before Use • INFORMATION ............................................................ E-2 Usage • USING THE REMOTE CONTROL ............................... E-3 • CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT ................................................................ E-7 • BASIC OPERATIONS ................................................ E-12 • SELECTING INPUT MODE ....................................... E-14 • OTHER BASIC OPERATIONS .................................. E-16 • WATCHING PICTURES ON THE WIDE SCREEN.... E-17 Adjustments • ADJUSTMENT MENU................................................ E-19 • BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS ............................................................ E-20 • ADJUSTING THE PICTURE ...................................... E-21 • ADJUSTING SCREEN POSITION AND SIZE ........... E-27 • ADJUSTING AUDIO................................................... E-28• OTHER ADJUSTMENTS ........................................... E-29 • INITIALIZATION OF USER ADJUSTMENT VALUE .. E-35 Others • CLEANING AND MAINTENANCE ............................. E-36 Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how to use the display correctly. Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions (see the separate Safety Precautions manual). Keep this manual where the user can see it easily. * Installation and removal require special expertise. Consult your product dealer for details. * When English is selected at Language of the on-screen display, colour will be displayed in the case of the R model and color will be displayed for all other models. The notation used in this users manual is color. Contents Page Page USERS MANUAL (Precautions and Adjustment Methods) WIDE PLASMA DISPLAY MHD01661-01_E.book 1 ページ ２００４年１１月１６日 火曜日 午後４時３３分
E-2 INFORMATION • Receptacle Make sure that the power cable’s grounding wire is grounded. The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information. • Have the display inspected and cleaned by your dealer at regular intervals. • Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly displayed for long periods. (See P. E-33.) • Extremely high-precision technology has been used in the manufacture of the plasma display panel, with the effective pixel elements exceeding 99.99%. Please be aware, however, that fewer than 0.01% of the pixels may be missing or remain constantly lit. • Some models are fitted with a radiator fan to prevent the display’s internal temperature from rising during operation. Be careful of the air emitted by the radiator fan, as it may be hot. • Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment. You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote control does not function properly. • Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer for more information. • The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see that the power indicator lamp flashes red or green. • Install the display in a location close to a main power supply outlet, and where the emergency stop button can be easily reached. Warning If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle to prevent fire or electric shock. Then contact your dealer. Note • Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products. • In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items. MHD01661-01_E.book 2 ページ ２００４年１１月１６日 火曜日 午後４時３３分
E-3 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 USING THE REMOTE CONTROL For details, see page Î. REMOTE CONTROL (for the W/R models) button Î E-12 Switches between Power On and Standby. - (MUTE button) Î E-13 Temporarily mutes the audio. To return the audio to normal, press this button once again, or press the 1 does the 2 work also. 3 (DISPLAY button) Î E-16 Press this button to display the input mode, and screen size status. The status is displayed for about five seconds. 4 (PICTURE MODE button) Î E-16 Use this button to switch the Picture Mode. 5 (PICTURE MEMORY button) Î E-16 Press this button to recall a Picture Memory. (WIDE button) Î E-17 Switches the screen size. ) – * (RGB input mode selector button) Î E-15 Selects RGB1 - 2. = (RGB3/VIDEO4 imput mode selector button) Î E-14 Selects VIDEO4. – $ (Video input mode selector button) Î E-14 Selects VIDEO1 - 3. 12 (Volume adjustment buttons) Î E-13 Press these buttons to adjust the volume. ; (MENU button) Î E-19–E-35 Press this button to display the menu screen for adjusting the picture and/or the audio. < (ENTER button) Î E-19–E-35 Press this button to fix the entry in the ADJUSTMENT MENU. CDEF (Adjustment buttons) Î E-19–E-35 Use these buttons to select the item or adjust the value in the menu screen. Note • Functions may not be available with some models and some device options. MHD01661-01_E.book 3 ページ ２００４年１１月１６日 火曜日 午後４時３３分
E-4 USING THE REMOTE CONTROL (Continued) For details, see page Î. REMOTE CONTROL (for the U model) button Î E-12 Switches between Power On and Standby. - (MUTE button) Î E-13 Temporarily mutes the audio. To return the audio to normal, press this button once again, or press the 1 does the 2 work also. 3 (DISPLAY button) Î E-16 Press this button to display the input mode, and screen size status. The status is displayed for about five seconds. 4 (PICTURE MODE button) Î E-16 Use this button to switch the Picture Mode. 5 (PICTURE MEMORY button) Î E-16 Press this button to recall a Picture Memory. (WIDE button) Î E-17 Switches the screen size. – & (Video input mode selector button) Î E-14 Selects VIDEO1 - 5. ) – * (RGB input mode selector button) Î E-15 Selects RGB1 - 2. 12 (Volume adjustment buttons) Î E-13 Press these buttons to adjust the volume. ; (MENU button) Î E-19–E-35 Press this button to display the menu screen for adjusting the picture and/or the audio. < (ENTER button) Î E-19–E-35 Press this button to fix the entry in the ADJUSTMENT MENU. CDEF (Adjustment buttons) Î E-19–E-35 Use these buttons to select the item or adjust the value in the menu screen. Note • Functions may not be available with some models and some device options. MHD01661-01_E.book 4 ページ ２００４年１１月１６日 火曜日 午後４時３３分
E-5 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 To prevent malfunction, be sure not to apply any form of severe shock to the remote control. To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment. Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner. PUTTING BATTERIES IN THE REMOTE CONTROL (1) To remove the cover, slide it outwards while pressing it down.(2) Place two AA batteries in the remote control. Make sure that the batteries are properly oriented.(3) Close the cover until it snaps into place. PRECAUTIONS CAUTION Be sure to use replacement batteries of the same type as the original ones. When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/ area. Note The remote control will not function properly if the batteries are dead. Be sure to replace them as needed. Do not use rechargeable batteries (Ni-Cd, etc.). MHD01661-01_E.book 5 ページ ２００４年１１月１６日 火曜日 午後４時３３分
E-6 USING THE REMOTE CONTROL (Continued) Point the remote control at the display’s signal receiver when using it. Make sure that there are no obstacles between the remote control and the display’s signal receiver. EFFECTIVE RANGE FOR THE REMOTE CONTROL Left Upper Lower Right 5 m (Front) 30°30° 20° 20° Note The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the remote control from a different position. MHD01661-01_E.book 6 ページ ２００４年１１月１６日 火曜日 午後４時３３分