Fujitsu P42hts40 Users Manual

E-21
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
• A video camera can conveniently be connected to the Video 3 input on the front side. 
• Connect the video signal cable to either the S-video input terminal or the video input terminal. 
• If the unit to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.
• As the connecting cable differs with videogame machines, please consult the instructions for your videogame machine....

E-22
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
• As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. 
• The PC can be connected to either the front side or the rear side, whichever is most convenient.
PC
To audio input To RGB output (mD-sub)
To RGB output (DVI-D)To audio output
To mD-sub input
To DVI-D input
When connecting to the front side of the AV Selector
To audio input
To RGB output (mD-sub)
To audio...

E-23
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
• Connect the audio signal cables to the digital output and the analog audio output terminals.
* The signal input as digital input is not output as analog audio.
* The digital audio input terminal on the display complies with a sampling frequency of 48 kHz. 
In the case of outputs with another frequency, connect to an audio system (amplifier)*.
WHEN OUTPUTTING AUDIO SIGNALS TO AN AUDIO AMPLIFIER
Rear side of AV Selector
To...

E-24
BASIC OPERATIONS
TURNING THE POWER ON AND STAND-BY
1
Press OFF/ON /I to the left at the 
bottom of the display and 
/I to 
the left at the bottom of the AV 
Selector to the STD-BY state.
The power lamp lights up.
2
Press  on the remote control.
The color of the power lamp changes from “Red” to 
“Green”.
3
Press , the button of the channel 
you want to watch, and then press 
 or .
Select TV or the picture mode to input.
4
Press  when the power is ON.
The color of the power lamp changes from...

E-25
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
ADJUSTING THE VOLUME
Adjusting the volume
Press  to increase the volume.
Press 
 to reduce the volume.
* Note that the volume level remains stored even when you 
turn OFF the power.
Muting the audio
Press .
The audio is removed.
Press again to restore the audio to the original level.
The mute mode can also be released by pressing the volume 
buttons.
* You can also use the buttons 
on the display’s control 
panel to perform...

E-26
SELECTING INPUT MODE
WATCHING A TV BROADCASTING
1
Select the country.
Select the country using the Auto Store function in the 
CHANNEL SETTING menu (see page E-40).
This enable the terrestrial broadcastings to be watched 
for selected country.
2
Press .
Available to watch the terrestrial broadcastings.
The last Program No. that you watched is received.
3
Select the Program No.
Press  – .
The program changes to the selected Program No.
Select your desired Program No. (0 to 99).
• Even if you press...

E-27
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
WATCHING A TELETEXT BROADCASTINGS
1
Display the TV program.
Press  to set to TV mode.
2
Press .
This enables teletext broadcasts to be viewed.
(superimposed over the TV program)
The teletext broadcasting INDEX screen is received.
* Whenever 
 is pressed, the screen switches 
between teletext screen superimposed over the TV 
program and teletext-only screen.
• Displays the teletext page program.
The teletext page program is...

E-28
SELECTING INPUT MODE (Continued)
VIDEO INPUT MODE
1
Press  to select the input mode.
You can select from VIDEO 1 mode to VIDEO 7 
mode.
The video modes corresponding to each input 
terminal are as follows.
•VIDEO1: SCART
•VIDEO2: SCART
• VIDEO3: Video, S-video
•VIDEO4: SCART
• VIDEO5: Component video
• VIDEO6: Component video
• VIDEO7: HDMI
* For selection of the input terminal, see  
“SETTING THE INPUT TERMINALS” on 
P. E - 4 0 .
* You can also change VIDEO mode by pressing 
 –  during Video...

E-29
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
OTHER BASIC OPERATIONS
CONVENIENT FUNCTIONS
Still Picture
Press .
The currently viewed scene can be viewed as a still picture.
Convenient when you want to take a note, etc. Press again to return to the normal picture.
On-screen information showing the channel, etc.
Press .
The channel or mode is indicated on the screen for 5 seconds.
Picture Mode
Press .
This button can be used to switch the picture mode.
In the picture mode,...

E-30
WATCHING PICTURES ON THE WIDE SCREEN
SWITCHING BETWEEN SCREEN SIZES
1
Press .
The currently selected mode will appear.
2
Press  to select a desired Screen 
Size.
Each time you press , a different Screen Size 
appears.  The sequences used are as follows:
When you are in a Video input mode
When you are in an RGB input mode
* Depending on the type of signal, some aspects 
may not be selected.
* You can also use the buttons 
on the display’s control 
panel to perform these steps.
Normal mode
Wide1...